References
- Kim YG, Fujii H, Tsumura T, et al. Three defect types in friction stir welding of aluminum die casting alloy. Mater Sci Eng A. 2006;415:250–254.
- Sun Y, He D, Xue F, et al. Microstructure and mechanical characterization of a dissimilar friction-stir-welded CuCrZr/CuNiCrSi butt joint. Metals. 2018;8:325.
- Dehghani M, Amadeh A, Mousavi SAAA. Investigations on the effects of friction stir welding parameters on intermetallic and defect formation in joining aluminum alloy to mild steel. Mater Des. 2013;49:433–441.
- Khan NZ, Siddiquee AN, Khan ZA, et al. Investigations on tunneling and kissing bond defects in FSW joints for dissimilar aluminum alloys. J Alloys Compd. 2015;648:360–367.
- Aziz SB, Dewan MW, Huggett DJ, et al. A fully coupled thermomechanical model of friction stir welding (FSW) and numerical studies on process parameters of lightweight aluminum alloy joints. Acta Metall Sin. 2018;31:1–18.
- Bilici MK, Yükler AI. Influence of tool geometry and process parameters on macrostructure and static strength in friction stir spot welded polyethylene sheets. Mater Des. 2012;33:145–152.
- Bozkurt Y, Salman S, Çam G. Effect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded AA 5754-H22/2024-T3 joints. Sci Technol Weld Join. 2013;18:337–345.
- Reynolds AP. Visualisation of material flow in autogenous friction stir welds. Sci Technol Weld Join. 2000;5:120–124.
- Priyadarshini A, Pal SK, Samantaray AK. Finite element modeling of chip formation in orthogonal machining. In: Davim JP, editor. Stat. comput. tech. manuf. Berlin: Springer; 2012. p. 101–144.
- Ducobu F, Arrazola PJ, Rivière-Lorphèvre E, et al. The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation. Procedia CIRP. 2017;58:245–250.
- Ducobu F, Rivière-Lorphèvre E, Filippi E. Application of the coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting. Eur J Mech A/Solids. 2016;59:58–66.
- Ducobu F, Rivière-Lorphèvre E, Filippi E. Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting. Int J Mech Sci. 2014;81:77–87.
- Al-Badour F, Merah N, Shuaib A, et al. Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes. J Mater Process Technol. 2013;213:1433–1439.
- Chen G, Li H, Wang G, et al. Effects of pin thread on the in-process material flow behavior during friction stir welding: a computational fluid dynamics study. Int J Mach Tools Manuf. 2018;124:12–21.
- Zhu Y, Chen G, Chen Q, et al. Simulation of material plastic flow driven by non-uniform friction force during friction stir welding and related defect prediction. Mater Des. 2016;108:400–410.
- Chen G, Zhang S, Zhu Y, et al. Thermo-mechanical analysis of friction stir welding: a review on recent advances. Acta Metall Sin. 2020;33(1):3–12.
- Meyghani B, Wu C. Progress in thermomechanical analysis of friction stir welding. Chin J Mech Eng. 2020;33(1):12.
- Zhu Z, Wang M, Zhang H, et al. A finite element model to simulate defect formation during friction stir welding. Metals. 2017;7:256.
- Liu XC, Wu CS. Elimination of tunnel defect in ultrasonic vibration enhanced friction stir welding. Mater Des. 2016;90:350–358.
- Mishra RS, Ma ZY. Friction stir welding and processing. Mater Sci Eng R Rep. 2005;50:1–78.
- Sato YS, Takauchi H, Park SHC, et al. Characteristics of the kissing-bond in friction stir welded Al alloy 1050. Mater Sci Eng A. 2005;405:333–338.
- Oosterkamp A, Oosterkamp LD, Nordeide A. ‘Kissing bond’ phenomena in solid-state welds of aluminum alloys. Weld J. 2004;83:225-S.
- Yaduwanshi DK, Bag S, Pal S. Numerical modeling and experimental investigation on plasma-assisted hybrid friction stir welding of dissimilar materials. Mater Des. 2016;92:166–183.
- Mehta M, Arora A, De A, et al. Tool geometry for friction stir welding – optimum shoulder diameter. Metall Mater Trans A Phys Metall Mater Sci. 2011;42:2716–2722.
- Arora A, Mehta M, De A, et al. Load bearing capacity of tool pin during friction stir welding. Int J Adv Manuf Technol. 2012;61:911–920.
- Benson DJ, Okazawa S. Contact in a multi-material Eulerian finite element formulation. Comput Methods Appl Mech Eng. 2004;193:4277–4298.
- Jain R, Pal SK, Singh SB. Numerical modeling methodologies for friction stir welding process. In: Davim JP, editor. Computational methods and production engineering. Elsevier; 2017. p. 125–169.
- Benson DJ. Computational methods in Lagrangian and Eulerian hydrocodes. Comput Methods Appl Mech Eng. 1992;99:235–394.
- Simulia DS. ABAQUS 6.13 user’s manual. Providence (RI): Dassault Systems; 2013. p. 305–306.
- Al-Badour F, Merah N, Shuaib A, et al. Thermo-mechanical finite element model of friction stir welding of dissimilar alloys. Int J Adv Manuf Technol. 2014;72:607–617.
- Nandan R, DebRoy T, Bhadeshia HK. Recent advances in friction-stir welding – process, weldment structure and properties. Prog Mater Sci. 2008;53:980–1023.
- Dialami N, Cervera M, Chiumenti M. Defect formation and material flow in friction stir welding. Eur J Mech A/Solids. 2020;80:103912.
- Sun G, Chen Y, Chen S, et al. Fatigue modeling and life prediction for friction stir welded joint based on microstructure and mechanical characterization. Int J Fatigue. 2017;98:131–141.
- Ranjan R, Khan AR, Parikh C, et al. Classification and identification of surface defects in friction stir welding: an image processing approach. J Manuf Process. 2016;22:237–253.