Spinodal liquid phase separation enabling dissimilar resistance spot welding of immiscible iron and copper alloy system

References

• Soysal T, Kou S, Tat D, et al. Macrosegregation in dissimilar-metal fusion welding. Acta Mater. 2016;110:149–160.
   Web of Science ®Google Scholar
• Frech T, Tran J, Namola K. Pulsed arc welding of battery tabs for vehicle electrification. Weld J. 2022;101:36–38.
   Web of Science ®Google Scholar
• Callister WD, Rethwisch DG. Materials science and engineering. Vol. 5. New York: Wiley; 2011.
   Google Scholar
• Shi R, Wang CP, Wheeler D, et al. Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immiscible alloys. Acta Mater. 2013;61:1229–1243.
   Web of Science ®Google Scholar
• Elder SP, Munitz A, Abbaschian GJ. Metastable liquid immiscibility in Fe-Cu and Co-Cu alloys. Mater Sci Forum. 1991;50:137–150.
   Google Scholar
• Munitz A. Metastable liquid phase separation in tungsten inert gas and electron beam copper/stainless-steel welds. J Mater Sci. 1995;30:2901–2910.
   Web of Science ®Google Scholar
• Chen YZ, Liu F, Yang GC, et al. Rapid solidification of bulk undercooled hypoperitectic Fe–Cu alloy. J Alloy Compd. 2007;427:L1–L5.
   Web of Science ®Google Scholar
• Lu XY, Cao CD, Wei B. Microstructure evolution of undercooled iron–copper hypoperitectic alloy. Mater Sci Eng:A. 2001;313:198–206.
   Web of Science ®Google Scholar
• Kou S. Welding metallurgy. 3rd ed. Hoboken (NJ): Wiley; 2020.
   Google Scholar
• Soysal T. A criterion to find crack-resistant aluminium alloys to avoid solidification cracking. Sci Technol Weld Join. 2021;26:99–105.
   Web of Science ®Google Scholar
• Lippold JC. Welding metallurgy and weldability. Hoboken (NJ): Wiley; 2015.
   Google Scholar
• Savage WF, Nippes EF, Mushala MC. Copper-contamination cracking in the weld heat-affected zone. Weld J. 1978;57:145s–152s.
   Web of Science ®Google Scholar
• Choudhary R, Laik A, Mishra P. Microstructure evolution during stainless steel-copper vacuum brazing with a Ag/Cu/Pd filler alloy: effect of nickel plating. J Mater Eng Performance. 2017;26:1085–1100.
   Web of Science ®Google Scholar
• Singh KP, Patel A, Bhope K, et al. Optimization of the diffusion bonding parameters for SS316L/CuCrZr with and without nickel interlayer. Fusion Eng Des. 2016;112:274–282.
   Web of Science ®Google Scholar
• Kimura M, Kusaka M, Kaizu K, et al. Effect of post-weld heat treatment on joint properties of friction welded joint between brass and low carbon steel. Sci Technol Weld Join. 2010;15(7):590–596.
   Web of Science ®Google Scholar
• Zhou M, Chen G, Wu J, et al. The Cu/Fe magnetic yoke with novel interface and excellent mechanical properties by friction stir welding. Sci Technol Weld Join. 2022;27:339–352.
   Web of Science ®Google Scholar
• Sahlot P, Nene SS, Frank M, et al. Towards attaining dissimilar lap joint of CuCrZr alloy and 316L stainless steel using friction stir welding. Sci Technol Weld Join. 2018;2018(23):715–720.
   Google Scholar
• Tian Q, Ming Y, Xu J, et al. Experimental study of Cu/Fe underwater self-constrained explosive welding tube. Sci Technol Weld Join. 2021;26:521–528.
   Web of Science ®Google Scholar
• Noecker FF, DuPont JN. Microstructural development and solidification cracking susceptibility of Cu deposits on steel: part I. J Mater Sci. 2007;42(2):495–509.
   Web of Science ®Google Scholar
• Li Z, Fontana G, Penasa M. Autogenous laser welding of austenitic stainless steel to copper alloy. Sci Technol Weld Join. 1998;3:81–87.
   Web of Science ®Google Scholar
• Magnabosco I, Ferro P, Bonollo F, et al. An investigation of fusion zone microstructures in electron beam welding of copper–stainless steel. Mater Sci Eng A. 2006;424:163–173.
   Web of Science ®Google Scholar
• Pouranvari M, Marashi SPH. Critical review of automotive steels spot welding: process, structure and properties. Sci Technol Weld Join. 2013;18:361–403.
   Web of Science ®Google Scholar
• Pouranvari M. Critical assessment 27: dissimilar resistance spot welding of aluminium/steel: challenges and opportunities. Mater Sci Technol. 2017;33:1705–1712.
   Web of Science ®Google Scholar
• Zare M, Pouranvari M. Metallurgical joining of aluminium and copper using resistance spot welding: microstructure and mechanical properties. Sci Technol Weld Join. 2021;26:461–469.
   Web of Science ®Google Scholar
• RWMA – resistance welding manual. 4th ed. Philadelphia (PA): Resistance Welding Manufacturing Alliance.
   Google Scholar
• Derimow N, Abbaschian R. Liquid phase separation in high-entropy alloys – a review. Entropy. 2018;20:890.
   PubMed Web of Science ®Google Scholar
• Munitz A. Liquid separation effects in Fe-Cu alloys solidified under different cooling rates. MetallTrans B. 1987;18:565–575.
   Google Scholar
• Zeng DW, Xie CS, Yung KC. Mesostructured composite coating on SAE 1045 carbon steel synthesized in situ by laser surface alloying. Mater Lett. 2002;56:680–684.
   Web of Science ®Google Scholar
• Yue S, Qu J, Li G, et al. A comprehensive investigation of carbon micro-alloying on microstructure evolution and properties of metastable immiscible Cu-Fe alloy. J Alloys Compd. 2022;921:166163.
   Web of Science ®Google Scholar
• Lee KL, Kui HW. Phase separation in undercooled molten Pd80Si20: part I. J Mater Res. 1999;14:3653–3662.
   Web of Science ®Google Scholar
• DuPont JN, Robino CV, Marder AR. Modelling mushy zones in welds of multicomponent alloys: implications for solidification cracking. Sci Technol Weld Join. 1999;4:1–14.
   Web of Science ®Google Scholar
• Soysal T. Effect of solidification models on predicting susceptibility of carbon steels to solidification cracking. Weld World. 2021;65:1943–1954.
   Web of Science ®Google Scholar