References
- Zhang J, Chen S, Lu H, et al. The effect of gap on the quality of glass-to-glass welding using a picosecond laser. Opt Lasers Eng. 2020;134:106248. DOI:10.1016/j.optlaseng.2020.106248.
- Yi R, Chen C, Li Y, et al. The bonding between glass and metal. Int J Adv Manuf Technol. 2020;111:963–983.
- Utsumi A, Ooie T, Yano T, et al. Direct bonding of glass and metal using short pulsed laser. J Laser Micro Nanoeng. 2007;2:133–136.
- Matsuyoshi S, Mizuguchi Y, Muratsugu A, et al. Welding of glass and copper with a rough surface using femtosecond fiber laser pulses. J Laser Micro Nanoeng. 2018;13:21–25.
- Huang S, Chen R, Zhang H, et al. A study of welding process in connecting borosilicate glass by picosecond laser pulses based on response surface methodology. Opt Laser Technol. 2020;131:106427. DOI:10.1016/j.optlastec.2020.106427.
- Ozeki Y, Inoue T, Tamaki T, et al. Direct welding between copper and glass substrates with femtosecond laser pulses. Appl Phys Express. 2008;1:082601. DOI:10.1143/APEX.1.082601.
- Wang C, Zhang S, Luo Z, et al. High-quality welding of glass by a femtosecond laser assisted with silver nanofilm. Appl Opt. 2021;60:5360–5364.
- Richter S, Zimmermann F, Tünnermann A, et al. [INVITED] Laser welding of glasses at high repetition rates – fundamentals and prospects. Opt Laser Technol. 2016;83:59–66.
- Carter RM, Chen J, Shephard JD, et al. Picosecond laser welding of similar and dissimilar materials. Appl Opt. 2014;53:4233–4238.
- Wang H, Guo L, Zhang X, et al. Influence of processing parameters on the quality of titanium-coated glass welded by nanosecond pulse laser. Opt Laser Technol. 2021;144:107411. DOI:10.1016/j.optlastec.2021.107411.
- Wang Y, Li Y, Ao S, et al. Welding of 304 stainless steel and glass using high-repetition-frequency femtosecond laser. Mater Res Express. 2021;8:106523. DOI:10.1088/2053-1591/ac30b1.
- Zhang G, Cheng G. Direct welding of glass and metal by 1 kHz femtosecond laser pulses. Appl Opt. 2015;54:8957–8961.
- Carter RM, Troughton M, Chen J, et al. Towards industrial ultrafast laser microwelding: SiO2 and BK7 to aluminium alloy. Appl Opt. 2017;56:4873–4881.
- Li P, Xu X, Tan W, et al. Improvement of laser transmission welding of glass with titanium alloy by laser surface treatment. Materials (Basel). 2018;11:2060. DOI:10.3390/ma11102060.
- Stein P, García O, Morales M, et al. Numerical simulation of laser ablation for photovoltaic materials. Appl Surf Sci. 2012;258:9288–9291.
- Jiang N, Silcox J. Observations of reaction zones at chromium/oxide glass interfaces. J Appl Phys. 2000;87:3768–3776.
- Zhang R, Min Y, Wang Y, et al. Structural evolution of molten slag during the early stage of basic oxygen steelmaking. ISIJ Int. 2020;60:212–219.
- Wang Z, Meng Y, Jiao S, et al. Structural analysis and evaluation of surface tension of silicate melts containing CaO and FexO. Chem Eng Sci. 2021;245:116870.
- Nikmah A, Taufiq A, Hidayat A. Synthesis and characterization of Fe3O4/SiO2 nanocomposites. IOP Conf Ser: Earth Environ Sci. 2019;276:012046. DOI:10.1088/1755-1315/276/1/012046.
- Munasir DA, Kusumawati DH, et al. Structure analysis of Fe3O4@SiO2 core shells prepared from amorphous and crystalline SiO2 particles. IOP Conf Ser: Mater Sci Eng. 2018;367:012010. DOI:10.1088/1757-899X/367/1/012010.