A Base Isolation System for Developing Countries Using Discarded Tyres Filled with Elastomeric Recycled Materials

References

• Abraham, F., Alshuth, T. and Jerrams, S. [2005 ] “The effect of minimum stress and stress amplitude on the fatigue life of non strain crystallising elastomers,” Materials & Desisgn 26(3), 239–245.
   Web of Science ®Google Scholar
• Alshuth, T., Abraham, F., and Jerrams, S. [2002 ] “Parameter dependence and prediction of fatigue properties of elastomer products,” Rubber Chemistry and Technology 75(4), 635–642.
   Web of Science ®Google Scholar
• Ambraseys, N., Smit, P., Sigbjornsson, S., Suhadolc, P., and Margaris, B. [2002] European Commission, Research Directorate General, Environment and Climate Program ( available online at http://www.isesd.hi.is/ESD_Local/frameset.htm.com).
   Google Scholar
• Bazzurro, P. and Cornell, C. A. [1998 ] “Spatial disaggregation of seismic hazard,” Proc.6^th US National Conference on Earthquake Engineering, Seattle, Washington.
   Google Scholar
• Bugaldian, A. A. [2010 ] “Performance of reinforced concrete columns with steel-belted tires as transverse reinforcement,” Ph.D. dissertation, University of Ottawa, Ottawa, Canada.
   Google Scholar
• Calabrese, A., Spizzuoco, M., Serino, G., Della Corte, G., and Maddaloni, G. [2015 ] “Shaking table investigation of a novel, low‐cost, base isolation technology using recycled rubber,” Structural Control and Health Monitoring 22(1), 107–122.
   Web of Science ®Google Scholar
• Calabrese, A., Strano, S., and Terzo, M. [2015 ] “Real‐time hybrid simulations vs shaking table tests: Case study of a fibre‐reinforced bearings isolated building under seismic loading,” Structural Control and Health Monitoring 22(3), 535–555.
   Web of Science ®Google Scholar
• Charleson, A. W. [2006 ] “Low cost tension resistance to improve seismic safety of adobe construction: strips cut from used car tires,” The 8th US National Conference on Earthquake Engineering, San Francisco, California.
   Google Scholar
• Clark, S. K. [1981 ] “Mechanics of Pneumatic Tires,” US Department of Transportation, National Highway Traffic Safety Administration, Washington, DC.
   Google Scholar
• Convertito, V., Iervolino, I., and Herrero, A. [2009 ] “Importance of mapping design earthquakes: insights for the Southern Apennines, Italy,” Bulletin of the Seismological Society of America 99(5), 2979–2991.
   Web of Science ®Google Scholar
• Day, K. E., Holtze, K. E., Metcalfe-Smith, J. L., Bishop, C. T., and Dutka, B. J. [1993 ] “Toxicity of leachate from automobile tires to aquatic biota,” Chemosphere 27(4), 665–675.
   Web of Science ®Google Scholar
• Dean, G. D., Duncan, J. C., and Johnson, A. F. [1984 ] “Determination of non-linear dynamic properties of carbon-filled rubbers,” Polymer Testing 4(2), 225–249.
   Web of Science ®Google Scholar
• European Tyre and Rubber Industry manufacturer’s association (ETRMA) statistics [2013] (available online at http://www.etrma.org/statistics-2).
   Google Scholar
• Ghazavi, M. [2006 ] “Shear strength characteristics of sand-mixed with granular rubber,” Geotechnical and Geological Engineering 22(3), 401–416.
   Google Scholar
• Gil-Negrete, N., Vinolas, J., and Kari, L. [2006 ] “A simplified methodology to predict the dynamic stiffness of carbon-black filled rubber isolators using a finite element code,” Journal of Sound and Vibration 296(4), 757–776.
   Web of Science ®Google Scholar
• Hataf, N. and Rahimi, M. M. [2008 ] “Experimental investigation of bearing capacity of sand reinforced with randomly distributed tire shreds,” Construction and Building Materials 20(10), 910–916.
   Web of Science ®Google Scholar
• Hazarika, H. and Yasuhara K. [2008 ] Scrap Tire Derived Geomaterials, Opportunities and Challenges, Taylor & Francis Group, London.
   Google Scholar
• Hazarika, H., Kohama E., Suzuki H., and Sugano T. [2006 ] “Enhancement of earthquake resistance of structures using tire chips as compressible inclusion,” Reports of the Port and Airport Research Institute 45(1), 27.
   Google Scholar
• Hazarika, H., Yasuhara, K., Hyodo, M., Karmokar, A. K., and Mitarai, Y. [2008 ] “Mitigation of earthquake induced geotechnical disasters using a smart and novel geomaterial,” The 14th World Conferene on Earthquake Engineering Beijing, China.
   Google Scholar
• Iervolino, I., Chioccarelli, E., and Convertito, V. [2011 ] “Engineering design earthquakes from multimodal hazard disaggregation,” Soil Dynamics and Earthquake Engineering 31(9), 1212–1231.
   Web of Science ®Google Scholar
• Iervolino, I., Galasso, C., and Cosenza, E. [2010 ] “REXEL: Computer aided record selection for code–based seismic structural analysis,” Bulletin of Earthquake Engineering 8(2), 399–362.
   Web of Science ®Google Scholar
• Kelly, J. [1996 ] “Natural Rubber Isolation Systems for Earthquake Protection of Low-Cost Buildings,” Report No. UCB/EERC-95-12, Earthquake Engineering Research Center, University of California, Berkeley, California.
   Google Scholar
• Kelly, J. and Taniwangsa, W. [1996 ] “Experimental and Analytical Studies of Base Isolation Applications for Low-Cost Housing,” Report No. UCB/EERC-96-04, Earthquake Engineering Research Center, University of California, Berkeley, California.
   Google Scholar
• Kelly, J. M. [1983 ] “The economic feasibility of seismic rehabilitation of buildings by base isolation,” Earthquake Engineering Research Center, University of California, California
   Google Scholar
• Kelly, J. M. [1997 ] Earthquake-Resistant Design with Rubber, 2nd ed., Springer-Verlag, London.
   Google Scholar
• Kelly, J. M. and Marsico, M. R. [2015 ] “The influence of damping on floor spectra in seismic isolated nuclear structures,” Structural Control and Health Monitoring 22(4), 743–756.
   Web of Science ®Google Scholar
• Kelly, J. M. and Calabrese, A. [2012 ] “Mechanics of Fiber Reinforced Bearings,” PEER Report 2012/101 Pacific Earthquake Engineering Research Center, University of California, Berkeley, California.
   Google Scholar
• Kelly, J. M. and Konstantinidis, D. [2009 ] “Effect of friction on unbonded elastomeric bearings,” Journal of Engineering Mechanics 135(9), 953–960.
   Web of Science ®Google Scholar
• Ketterling, K. [2002 ] “Hollow-core seismic base isolation bearings using crumb-rubber composite from recycled tires for residential construction,” Ph.D. dissertation, Idaho State University, Idaho.
   Google Scholar
• Koh, C. G. and Kelly, J. M. [1987 ] “Effects of axial load on elastomeric isolation bearings,” Rep. No. UCB/EERC-86/12. Earthquake Engineering Research Center, University of California, Berkeley.
   Google Scholar
• Kurihara, M., Nishimoto, K., Shigeta, M., and Tachi, Y. A. [1990 ] “Study on response during large deformation in a seismic isolation system of nuclear island buildings,” JSME International Journal Series 3, Vibration, control engineering, engineering for industry 33(3), 404–411.
   Google Scholar
• Lang, A. F. and Sargent, J. D. [2005 ] U.S. Patent No. 6,862,848. U.S. Patent and Trademark Office, Washington, DC.
   Google Scholar
• Lang, A. F., Sargent, J. D., and Lynn, A. [2002 ] “The use of recycled tire for base isolation for application in developing nations,” In Abstracts: Seventh US National Conference on Earthquake Engineering, Earthquake Engineering Research Institute ( p. 21).
   Google Scholar
• Li, Y., Liu, W. Y., and Frimpong, S. [2012 ] “Effect of ambient temperature on stress, deformation and temperature of dumb truck tire,” Engineering Failure Analysis 23, 55–62.
   Web of Science ®Google Scholar
• Mayes, R. L., Jones, L. R., and Kelly, T. E. [1990 ] “The economics of seismic isolation in buildings,” Earthquake Spectra 6(2), 245–263.
   Google Scholar
• Montella, G., Calabrese, A., and Serino, G. [2014 ] “Mechanical characterization of a tire derived material: experiments, hyperelastic modeling and numerical validation,” Construction and Building Materials 66, 336–347.
   Web of Science ®Google Scholar
• Moon, B.-Y., Kang, G.-J., Kang, B.-S., and Kelly, J. M. [2002 ] “Design and manufacturing of fiber reinforced elastomeric isolator for seismic isolation,” Journal of Materials Processing Technology 130-131, 145–150.
   Web of Science ®Google Scholar
• Moon, B. Y., Kang, G. J., Kang, B. S., Kim G. S., and Kelly J. M. [2003 ] “Mechanical properties of seismic isolation system with fiber-reinforced bearing of strip type,” International Applied Mechanics 39(10), 1231–1239.
   Web of Science ®Google Scholar
• Presti, D. L. [2013 ] “Recycled tyre rubber modified bitumens for road asphalt mixtures: A literature review,” Construction Building Materials 49, 863–881.
   Web of Science ®Google Scholar
• Sargent, J. D. and Lang, A. F. [2001 ] “Base-isolation with a recycled tire: Emphasis on use in developing nations,” Technical Report, California Polytechnic State University, California.
   Google Scholar
• Sombatsompop, N. [1999 ] “Dynamic mechanical properties of SBR and EPDM vulcanisates filled with cryogenically pulverized flexible polyurethane foam particles,” Journal of Applied Polymer Science 74(5), 1129–1139.
   Web of Science ®Google Scholar
• Son, K. S., Hajirasouliha, I., and Pilakoutas, K. [2008 ] “Strength and deformability of waste tyre rubber-filled reinforced concrete Columns,” Construction Building Materials 25, 218–226.
   Web of Science ®Google Scholar
• Torgal, F. P., Ding, T., and Jalali, S. [2012 ] “Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): An overview,” Construction Building Materials 30, 714–724.
   Web of Science ®Google Scholar