References
- A. Federal Emergency Management, Quantification of Building Seismic Performance Factors, in, FEMA P695, Washington, DC, 2009.
- C.M.o. Construction, code for design of steel structures (GB 50017-2003), in, 2003.
- Chitty, L. [1947] “LXXVIII. On the cantilever composed of a number of parallel beams interconnected by cross bars,” The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science 38, 685–699.
- Christopoulos, C., Filiatrault, A., Uang, C.-M. and Folz, B. [2002] “Posttensioned energy dissipating connections for moment-resisting steel frames,” Journal of Structural Engineering 128, 1111–1120.
- Connor, J. J., Wada, A., Iwata, M. and Huang, Y. [1997] “Damage-controlled structures. I: Preliminary design methodology for seismically active regions,” Journal of Structural Engineering 123, 423–431.
- Deng, K., Pan, P., Li, W. and Xue, Y. [2015] “Development of a buckling restrained shear panel damper,” Journal of Constructional Steel Research 106, 311–321.
- Dougka, G., Dimakogianni, D. and Vayas, I. [2014] “Innovative energy dissipation systems (FUSEIS 1-1)—experimental analysis,” Journal of Constructional Steel Research 96, 69–80.
- Dusicka, P., Itani, A. M. and Buckle, I. G. [2007] “Cyclic response of plate steels under large inelastic strains,” Journal of Constructional Steel Research 63, 156–164.
- Dusicka, P. and Iwai, R., Development of linked column frame system for seismic lateral loads, in: Proceedings of the SEI Structures Congress, 2007.
- Fema, FEMA P-58-1: seismic performance assessment of buildings. Volume 1–methodology, (2012).
- Fema, A. T. C., 445, Next-generation performance-based seismic design guidelines-program plan for new and existing buildings, in, Redwood City, 2006.
- Hitaka, T. and Matsui, C. [2003] “Experimental study on steel shear wall with slits,” Journal of Structural Engineering 129, 586–595.
- Ji, X., Kato, M., Wang, T., Hitaka, T. and Nakashima, M. [2009] “Effect of gravity columns on mitigation of drift concentration for braced frames,” Journal of Constructional Steel Research 65, 2148–2156.
- Kurata, M., He, L. and Nakashima, M. [2015] “Steel slit shear walls with double-tapered links capable of condition assessment,” Earthquake Engineering & Structural Dynamics 44, 1271–1287.
- Lee, C.-H., Ju, Y. K., Min, J.-K., Lho, S.-H. and Kim, S.-D. [2015] “Non-uniform steel strip dampers subjected to cyclic loadings,” Engineering Structures 99, 192–204.
- Lee, C.-H., Lho, S.-H., Kim, D.-H., Oh, J. and Ju, Y. K. [2016] “Hourglass-shaped strip damper subjected to monotonic and cyclic loadings,” Engineering Structures 119, 122–134.
- Leet, K., Uang, C.-M. and Gilbert, A. M. [2002] Fundamentals of Structural Analysis (McGraw-Hill, Chichester).
- Ma, X., Borchers, E., Pena, A., Krawinkler, H. and Deierlein, G., Design and behavior of steel shear plates with openings as energy-dissipating fuses, John A. Blume Earthquake Engineering Center Technical Report, (2010).
- Mazzoni, S., McKenna, F., Scott, M. H. and Fenves, G. L. [2006] OpenSees Command Language Manual (Pacific Earthquake Engineering Research (PEER) Center) Berkeley, CA.
- Palazzo, B., Castaldo, P. and Marino, I. [2015] “The dissipative column: A new hysteretic damper,” Buildings 5, 163–178.
- Plumier, A., Doneux, C., Castiglioni, C., Brescianini, J., Crespi, A., Dell’Anna, S., Lazzarotto, L., Calado, L., Ferreira Joao, J. and Feligioni, S., Two innovations for earthquake resistant design: The INERD project, 2006.
- Rojas, P., Ricles, J. M. and Sause, R. [2005] “Seismic performance of post-tensioned steel moment resisting frames with friction devices,” Journal of Structural Engineering 131, 529–540.
- S.A.o.T.P.s.R.o. China, Hot-rolled H and T section steel (GB/T 11263-2010), in, Standards Press of China, 2010.
- Sabelli, R., Mahin, S. and Chang, C. [2003] “Seismic demands on steel braced frame buildings with buckling-restrained braces,” Engineering Structures 25, 655–666.
- Saeki, E., Iwamatu, K. and Wada, A. [1996] “Analytical study by finite element method and comparison with experiment results concerning buckling-restrained unbonded braces,” Journal of Structural & Construction Engineering, 61(484), 111–120.
- Shi, Y., Wang, M. and Wang, Y. [2011] “Experimental and constitutive model study of structural steel under cyclic loading,” Journal of Constructional Steel Research 67, 1185–1197.
- Simulia, D., Abaqus 6.11 analysis user’s manual, Abaqus 6.11 Documentation, (2011) 22.
- Smith, B. S. and Coull, A. [1991] Tall Building Structures: Analysis and Design. Austin, Texas: University of Texas Press.
- Verde, R. V. [1991] “Explanation for the numerous upper floor collapses during the 1985 Mexico city earthquake,” Earthquake Engineering & Structural Dynamics 20, 223–241.
- Xu, Y. H., Li, A. Q., Zhou, X. D. and Sun, P. [2011] “Shape optimization study of mild steel slit dampers,” Advanced Materials Research, Trans Tech Publ, 168-170, 2434–2438.
- Yan-Wen, L., Guo-Qiang, L. and Sun, F. [2017a] “Seismic performance evaluation of MRFs with dissipative continuous columns (submitted),” in Eurosteel 2017 (Copenhagen, Denmark). 1, 2966–2974.
- Yan-Wen, L., Guo-Qiang, L., Sun, F. and Jiang, J. [2017b] “Experimental study on continuous energy-dissipative steel columns under cyclic loading (under review),” Journal of Constructional Steel Research. 141, 104–117.
- Zhao, B., Taucer, F. and Rossetto, T. [2009] “Field investigation on the performance of building structures during the 12 May 2008 Wenchuan earthquake in China,” Engineering Structures 31, 1707–1723.
- Zsarnóczay, Á., Experimental and numerical investigation of buckling restrained braced frames for eurocode conform design procedure Development, in: Budapest University of Technology and Economics, 2013.