References
- AISC-341-10. 2010 Seismic provisions for structural steel buildings. AISC.
- Castro, J. M., F. J. Dávila-Arbona, and A. Y. Elghazouli. 2008. Seismic design approaches for panel zones in steel moment frames. Journal of Earthquake Engineering 12 (S1): 34–51. doi: https://doi.org/10.1080/13632460801922712.
- Chen, C. C., C. C. Lin, and C. H. Lin. 2006. Ductile moment connections used in steel column-tree moment-resisting frames. Journal of Constructional Steel Research 793–801. doi: https://doi.org/10.1016/j.jcsr.2005.11.012.
- Chen, C. C., C. C. Lin, and C. L. Tsai. 2004. Evaluation of reinforced connections between steel beams and box columns. Journal of Engineering Structures 1889–904. doi: https://doi.org/10.1016/j.engstruct.2004.06.017.
- Chou, C. C., and C. K. Jao. 2010. seismic rehabilitation of welded steel beam-to-box column connection utilizing internal flange stiffeners. Earthquake Engineering Research Institute. 26 (4): 927–950. doi:https://doi.org/10.1193/1.3480275.
- Ghobadi, M. S., M. Ghassemieh, A. Mazroi, and A. Abolmaali. 2009. Seismic performance of ductile welded connections using T-stiffener. Journal of Constructional Steel Research 766–75. doi: https://doi.org/10.1016/j.jcsr.2008.05.007.
- Goswami, R., and C. V. R. Murty. 2010. Externally reinforced welded I-beam-to-box-column seismic connection. Journal of Engineering Mechanics. doi: https://doi.org/10.1061/(ASCE)0733-9399(2010)136:1(23).
- Iannone, F., M. Latour, V. Piluso, and G. Rizzano. 2011. Experimental analysis of bolted steel beam-to-column connections: Component identification. Journal of Earthquake Engineering 15 (2): 214–44. doi: https://doi.org/10.1080/13632461003695353.
- Jahanbakhti, E., N. Fanaie, and A. Rezaeian. 2017. Experimental investigation of panel zone in rigid beam to box column connection. Journal of Constructional Steel Research 180–91. doi: https://doi.org/10.1016/j.jcsr.2017.06.025.
- Kang, C. H., K. J. Shin, Y. S. Oh, and T. S. Moon. 2001. Hysteresis behavior of CFT column to H-beam connections with external T-stiffener and penetrated elements. Engineering Structures 1194–201. doi: https://doi.org/10.1016/S0141-0296(00)00119-X.
- Kiamanesh, R., A. Abolmaali, and M. Ghassemieh. 2010. The effect of stiffeners on the strain patterns of the welded connection zone. Journal of Constructional Steel Research 19–27. doi: https://doi.org/10.1016/j.jcsr.2009.07.010.
- Kim, Y. J., and S. H. Oh. 2007. Effect of the moment transfer efficiency of a beam web on deformation capacity at box column-to-H beam connections. Journal of Constructional Steel Research 24–36. doi: https://doi.org/10.1016/j.jcsr.2006.02.009.
- Korol, R. M., A. Ghobarah, and S. Mourad. 1993. Blind bolted W-shaped beam to HSS columns. Journal of Engineering Structures. ASCE. doi:https://doi.org/10.1061/(ASCE)0733-9445(1993)119:12(3463).
- Kurobane, Y. 2002. Connections in tubular structures. Progress in Structural Engineering and Materials 35–45. doi: https://doi.org/10.1002/pse.102.
- Latour, M., V. Piluso, and G. Rizzano. 2011. Cyclic modeling of bolted beam-to-column connections: Component approach. Journal of Earthquake Engineering 15 (4): 537–63. doi: https://doi.org/10.1080/13632469.2010.513423.
- Mirghaderi, S. R., and M. Moradi. 2006. Seismic behavior of panel zones in beam to column connections with non-planner webs in moment resistance steel frames. 4th International Conference on Earthquake Engineering Taipei, Taipei, Taiwan.
- Mirghaderi, S. R., S. Torabian, and F. Keshavarzi. 2010. I-beam to box-column connection by a vertical plate passing through the column. Engineering Structures 2034–48. doi: https://doi.org/10.1016/j.engstruct.2010.03.002.
- Nia, Z. S., M. Ghassemieh, and A. Mazroi. 2013. WUF-W connection performance to box column subjected to uniaxial and biaxial loading. Journal of Constructional Steel Research 88: 90–108. doi:https://doi.org/10.1016/j.jcsr.2013.04.008.
- Park, J. W., S. M. Kang, and S. C. Yang. 2005. Experimental studies of wide flange beam to square concrete-filled tube column joints with stiffening plated around the column. Journal of Engineering Structures. ASCE. doi:https://doi.org/10.1061/(ASCE)0733-9445(2005)131:12(1866).
- Ricles, J. M., J. W. Fisher, L. W. Lu, and E. J. Kaufmann. 2002. Development of improved welded moment connections for earthquake-resistant design. Journal of Constructional Steel Research 565–604. doi: https://doi.org/10.1016/S0143-974X(01)00095-5.
- Shanmugam, N. E., and L. C. Ting. 1995. Welded interior box–column to I-beam connections. Journal of Structural Engineering. ASCE. doi:https://doi.org/10.1061/(ASCE)0733-9445(1995)121:5(824).
- Shanmugan, N. E., and L. C. Ting. 1991. Behavior of I-beam to box–column connections stiffened externally and subjected to fluctuating loads. Journal of Constructional Steel Research 129–48. doi: https://doi.org/10.1016/0143-974X(91)90016-T.
- Shin, K. J., Y. J. Kim, and Y. S. Oh. 2008. Seismic behavior of composite concrete-filled tube column-to-beam moment connections. Journal of Constructional Steel Research 118–27. doi: https://doi.org/10.1016/j.jcsr.2007.04.001.
- Tanaka, N. 2003. Evaluation of maximum strength and optimum haunch length of steel beam-end with horizontal haunch. Journal of Engineering Structures 229–39. doi: https://doi.org/10.1016/S0141-0296(02)00146-3.
- Torabian, S., S. R. Mirghaderi, and F. Keshavarzi. 2012. Moment-connection between I-beam and built-up square column by a diagonal through plate. Journal of Constructional Steel Research 385–401. doi: https://doi.org/10.1016/j.jcsr.2011.10.017.
- Wheeler, A. T., M. J. Clarke, and G. J. Hancock. 2001. FE modeling of four-bolt tubular moment end-plate connections. Journal of Engineering Structures. 126 (7). doi:https://doi.org/10.1061/(ASCE)0733-9445(2000)126:7(816).
- Wheeler, A. T., M. J. Clarke, G. J. Hancock, and T. M. Murray. 1998. Design model for bolted moment end plate connections joining rectangular hollow sections. Journal of Engineering Structures. ASCE. doi:https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(164).