309
Views
1
CrossRef citations to date
0
Altmetric
Original Articles

Influence of Individual Wall Strengths on Lateral Strength of URM Buildings Constructed Using Low-Strength Masonry

& ORCID Icon
Pages 1847-1874 | Received 21 Aug 2019, Accepted 10 Mar 2020, Published online: 17 Apr 2020

References

  • ABAQUS. 2010. ABAQUS: Theory manual. version 6.10, 2010.
  • Ahmad, Z., K. Shahzada, B. Gencturk, A. Naeem Khan, R. Rehan, M. Fahad, M. Ashraf, and Z. Ali. 2015. Seismic capacity assessment of unreinforced concrete block masonry buildings in pakistan before and after retrofitting. Journal of Earthquake Engineering 19 (3): 357–82. doi: 10.1080/13632469.2014.963744.
  • Allen, C., M. J. Masia, A. W. Page, M. C. Griffith, and H. Derakhshan [2015]. “Cyclic in-plane shear testing of unreinforced masonry walls with openings.” Proceedings of the Tenth Pacific Conference on Earthquake Engineering Building an Earthquake-Resilient Pacific, 1401–08, Sydney, Australia.
  • Apil, K. C., K. Sharma, and B. Pokharel. 2017. Performance of heritage structures during the Nepal Earthquake of April 25, 2015. Journal of Earthquake Engineering 23(8): 1346–84.
  • AS-3700. 2018. Australian standards for masonry structures. Australia: Standards Australia International, Sydney, NSW 2001.
  • ASCE/SEI 41-13. 2014. Seismic evaluation and retrofit of existing buildings. United States of America: Structural Engineering Institute, American Society of Civil Engineers.
  • Basha, S. H., and H. B. Kaushik. 2015. Evaluation of non-linear material properties of fly ash brick masonry under compression and shear. Journal of Materials in Civil Engineering 27 (8): 04014227. ASCE. doi:10.1061/(ASCE)MT.1943-5533.0001188.
  • Benedetti, D., P. Carydis, and P. Pezzoli. 1998. Shaking table tests on 24 simple masonry buildings. Earthquake Engineering and Structural Dynamics 27 (1): 67–90. doi: 10.1002/()1096-9845.
  • Bruneau, M. 1994. Seismic evaluation of unreinforced masonry buildings - a state-of-the-art report. Canadian Journal of Civil Engineering 21 (3): 512–39. doi: 10.1139/l94-054.
  • BS EN. 2002. Methods of test for masonry - Part 3: Determination of initial shear strength. BS EN 1052-3, (European standard), European Committee for standardization, Brussels.
  • Bureau of Indian Standards (BIS). 1987a. Code of practice for structural use of unreinforced masonry. IS 1905, New Delhi, India.
  • Bureau of Indian Standards (BIS). 1987b. Code of practice for design loads (Other than Earthquake) for buildings and structures. IS 875 (Part 1), New Delhi, India.
  • Bureau of Indian Standards (BIS). 1992. Indian standard methods of test of burn clay building bricks–Part 1: Determination of compressive strength. IS 3495, New Delhi, India.
  • Bureau of Indian Standards (BIS). 1993. Earthquake resistant design and construction of buildings-code of practice. IS 4326, New Delhi, India.
  • Bureau of Indian Standards (BIS). 1995. Indian standard code of practice for preparation and use of masonry mortars. IS 2250, New Delhi, India.
  • Bureau of Indian Standards (BIS). 2000. Code of practice for plain and reinforced concrete. IS 456, New Delhi, India.
  • Carvalho, J., J. Ortega, P. B. Lourenço, L. F. Ramos, and H. Roman. 2014. Safety analysis of modern heritage masonry buildings: Box-buildings in Recife, Brazil. Engineering Structures 80: 222–40. doi: 10.1016/j.engstruct.2014.09.004.
  • Casolo, S., and F. Peña. 2007. Rigid element model for in-plane dynamics of masonry walls considering hysteretic behaviour and damage. Earthquake Engineering and Structural Dynamics 36: 1029–48. doi: 10.1002/eqe.670.
  • Choudhury, T., G. Milani, and H. B. Kaushik. 2015. Comprehensive numerical approaches for the design and safety assessment of masonry buildings retrofitted with steel bands in developing countries: The case of India. Construction and Building Materials 85: 227–46. doi: 10.1016/j.conbuildmat.2015.02.082.
  • Chourasia, A., S. K. Bhattacharyya, N. M. Bhandari, and P. Bhargava. 2016. Seismic performance of different masonry buildings: Full-scale experimental study. Journal of Performance of Constructed Facilities 30 (5): 04016006. doi: 10.1061/(ASCE)CF.1943-5509.0000850.
  • Costa, A. A., A. Penna, and G. Magenes. 2011. Seismic performance of Autoclaved Aerated Concrete (AAC) masonry: From experimental testing of the in-plane capacity of walls to building response simulation. Journal of Earthquake Engineering 15 (1): 1–31. doi: 10.1080/13632461003642413.
  • Cundari, G., and G. Milani. 2013. Homogenized and heterogeneous limit analysis model for pushover analysis of ancient masonry walls with irregular texture. International Journal of Architectural Heritage 7 (3): 303–38. doi: 10.1080/15583058.2011.640737.
  • D’Altri, A. M., S. de Miranda, G. Castellazzi, and V. Sarhosis. 2018. A 3D detailed micro-model for the in-plane and out-of-plane numerical analysis of masonry panels. Computers and Structures 206: 18–30. doi: 10.1016/j.compstruc.2018.06.007.
  • Das, A., S. K. Deb, and A. Dutta. 2016. Comparison of numerical and experimental seismic responses of FREI-supported un-reinforced brick masonry model building. Journal of Earthquake Engineering 20 (8): 1239–62. doi: 10.1080/13632469.2016.1140098.
  • Derakhshan, H., W. Lucas, P. Visintin, and M. C. Griffith. 2018. Out-of-plane strength of existing two-way spanning solid and cavity unreinforced masonry walls. Structures 13: 88–101. doi: 10.1016/j.istruc.2017.11.002.
  • EN 1996-1-1, B. 2005. Eurocode 6: Design of masonry structures-Part 1-1: General rules for reinforced and unreinforced masonry structures. European Committee for Standardization.
  • Facconi, L., F. Minelli, S. Lucchini, and G. Plizzari. 2018. Experimental study of solid and hollow clay brick masonry walls retrofitted by steel fiber-reinforced mortar coating. Journal of Earthquake Engineering. doi: 10.1080/13632469.2018.1442264.
  • Ferreira, T. M., A. A. Costa, and A. Costa. 2015. Analysis of the out-of-plane seismic behavior of unreinforced masonry: A literature review. International Journal of Architectural Heritage 9 (8): 949–72. doi: 10.1080/15583058.2014.885996.
  • Graziotti, F., U. Tomassetti, A. Penna, and G. Magenes. 2016. Out-of-plane shaking table tests on URM single leaf and cavity walls. Engineering Structures 125: 455–70. doi: 10.1016/j.engstruct.2016.07.011.
  • Graziotti, F., U. Tomassetti, S. Sharma, L. Grottoli, and G. Magenes. 2019. Experimental response of URM single leaf and cavity walls in out-of-plane two-way bending generated by seismic excitation. Construction and Building Materials 195: 650–70. doi: 10.1016/j.conbuildmat.2018.10.076.
  • Griffith, M., and J. Vaculik. 2007. Out-of-plane flexural strength of unreinforced clay brick masonry walls. TMS Journal 25 (1):53–68.
  • Griffith, M. C., N. T. K. Lam, J. L. Wilson, and K. Doherty. 2004. Experimental investigation of unreinforced brick masonry walls in flexure. Journal of Structural Engineering 130 (3): 423–32. doi: 10.1061/(ASCE)0733-9445(2004)130:3(423).
  • Hendry, A., B. Sinha, and S. Davies. 1997. Design of masonry Structures. London: E & FN Spon., Taylor & Francis.
  • Javed, M., G. Magenes, B. Alam, A. N. Khan, Q. Ali, and A. M. Syed. 2015. Experimental seismic performance evaluation of unreinforced brick masonry shear walls. Earthquake Spectra 31 (1): 215–46. doi: 10.1193/111512EQS329M.
  • Joshi, V., and H. B. Kaushik. 2017 December. Historic earthquake resilient structures in Nepal and other Himalayan Regions and their seismic restoration. Earthquake Spectra 33 (S1): S299–S319. EERI, USA. doi:10.1193/121616EQS240M
  • Kallioras, S., G. Guerrini, U. Tomassetti, B. Marchesi, A. Penna, F. Graziotti, and G. Magenes. 2018. Experimental seismic performance of a full-scale unreinforced clay-masonry building with flexible timber diaphragms. Engineering Structures. 161: 231–49. Elsevier. doi:10.1016/j.engstruct.2018.02.016.
  • Kaushik, H. B., and K. Dasgupta. 2014. Assessment of seismic vulnerability of structures in Sikkim, India, based on damage observation during two recent earthquakes. Journal of Performance of Constructed Facilities 27 (6): 697–720. doi: 10.1061/(ASCE)CF.1943-5509.0000380.
  • Kaushik, H. B., K. Dasgupta, D. R. Sahoo, and G. Kharel. 2006. Performance of structures during the Sikkim earthquake of 14 February 2006. Current Science 91 (4): 449–55.
  • Kaushik, H. B., D. C. Rai, and S. K. Jain. 2007. Stress-strain characteristics of clay brick masonry under uniaxial compression. Journal of Materials in Civil Engineering 19 (9): 728–39. doi: 10.1061/(ASCE)0899-1561(2007)19:9(728).
  • Khalaf, F. M. 2005. New test for determination of masonry tensile bond strength. Journal of Materials in Civil Engineering 17 (6): 725–32. doi: 10.1061/(ASCE)0899-1561(2005)17:6(725).
  • Lawrence, S., and R. Marshall. 2000. Virtual work design method for masonry panels under lateral load.” 12th International Brick/Block Masonry Conference, Madrid, Spain, 1063–73.
  • Lawrence, S., and A. W. Page. 2013. Manual 4: Design of clay masonry for wind and earthquake. Sydney, Australia: Think Brick Australia.
  • Lubliner, J., J. Oliver, S. Oller, and E. Oñate. 1989. A plastic-damage model for concrete. International Journal of Solids and Structures 25 (3): 299–326. doi: 10.1016/0020-7683(89)90050-4.
  • Lucchesi, M., C. Padovani, G. Pasquinelli, and N. Zani. 1997. On the collapse of masonry arches. Meccanica 32 (4): 327–46. doi: 10.1023/A:1004275223879.
  • Maccarini, H., G. Vasconcelos, H. Rodrigues, J. Ortega, and P. B. Lourenço. 2018. Out-of-plane behavior of stone masonry walls: Experimental and numerical analysis. Construction and Building Materials 179: 430–52. doi: 10.1016/j.conbuildmat.2018.05.216.
  • Magenes, G., and G. M. Calvi. 1997. In-plane seismic response of brick masonry walls. Earthquake Engineering & Structural Dynamics 26 (11): 1091–112.
  • Magenes, G., A. Penna, I. E. Senaldi, M. Rota, and A. Galasco. 2014. Shaking table test of a strengthened full-scale stone masonry building with flexible diaphragms. International Journal of Architectural Heritage 8 (3): 349–375. doi: 10.1080/15583058.2013.826299.
  • Mendes, N., P. B. Lourenço, and A. Campos-Costa. 2014. Shaking table testing of an existing masonry building: Assessment and improvement of the seismic performance. Earthquake Engineering & Structural Dynamics 43: 247–66. doi: 10.1002/eqe.2342.
  • Milani, G., K. Beyer, and A. Dazio. 2009. Upper bound analysis limit analysis of meso –mechanical spandrel models for the pushover analysis of 2D masonry frames. Engineering Structures 7: 303–38.
  • Milani, G., P. B. Lourenço, and A. Tralli. 2006. Homogenised limit analysis of masonry walls, Part I: Failure surfaces. Computers and Structures 84 (3–4): 166–80. doi: 10.1016/j.compstruc.2005.09.005.
  • Mojsilović, N. 2011. Strength of masonry subjected to in-plane loading: A contribution. International Journal of Solids and Structures 48 (6): 865–73. doi: 10.1016/j.ijsolstr.2010.11.019.
  • Murty, C. V. R., D. C. Rai, S. K. Jain, H. B. Kaushik, G. Mondal, and S. R. Dash. 2006. Performance of structures in the Andaman and Nicobar Islands (India) during the December 2004 Great Sumatra earthquake and Indian Ocean tsunami. Earthquake Spectra 22 (SUPPL. 3): 321–54. doi: 10.1193/1.2206122.
  • Noor-E-Khuda, S., and M. Dhanasekar. 2018. Masonry walls under combined in-plane and out-of-plane loadings. Journal of Structural Engineering, ASCE 144 (2): 1–10. doi: 10.1061/(ASCE)ST.1943-541X.0001930.
  • NZSEE, SESOC, NZGS, MBIE, and EQC. 2017. New Zealand seismic assessment guideline. Ministry of Business, Innovation and Employment, the Earthquake Commission, the New Zealand Society for Earthquake Engineering, the Structural Engineering Society and the New Zealand Geotechnical Society, New Zealand. Accessed August 21, 2019. www.EQ-Assess.org.nz.
  • Page, A. 1981. The biaxial compressive strength of brick masonry. Proceedings of the Institution of Civil Engineers 71 (3): 893–906. doi: 10.1680/iicep.1981.1825.
  • Parisi, F., and N. Augenti. 2013. Seismic capacity of irregular unreinforced masonry walls with openings. Earthquake Engineering & Structural Dynamics 42: 101–21. doi: 10.1002/eqe.2195.
  • Penner, O., and K. J. Elwood. 2016. Out-of-plane dynamic stability of unreinforced masonry walls in one-way bending: Parametric study and assessment guidelines. Earthquake Spectra 32 (3): 1699–723. doi: 10.1193/011715EQS011M.
  • Roca, P., C. Molins, and A. R. Marí. 2005. Strength capacity of masonry wall structures by the equivalent frame method. Journal of Structural Engineering 131 (10): 1601–10. doi: 10.1061/(ASCE)0733-9445(2005)131:10(1601).
  • Senaldi, I., G. Magenes, A. Penna, A. Galasco, and M. Rota. 2014. The effect of stiffened floor and roof diaphragms on the experimental seismic response of a full-scale unreinforced stone masonry building. Journal of Earthquake Engineering 18 (3): 407–43. doi: 10.1080/13632469.2013.876946.
  • Sinha, B. 1978. An ultimate load analysis of laterally loaded brickwork panels. International Journal of Masonry Construction 1 (2): 57–61.
  • Strand 7.2 User’s Manual. 2013. Strand 7.2 user’s manual. Accessed August 21, 2019. www.strand7.com.
  • Tomaževič, M. 2011. Earthquake - resistant design of masonry buildings. London: Imperial College Press.
  • Vaculik, J., and M. C. Griffith. 2018. Out-of-plane shaketable testing of unreinforced masonry walls in two-way bending. Bulletin of Earthquake Engineering 16 (7): 2839–76. doi: 10.1007/s10518-017-0282-8.
  • Walsh, K., D. Dizhur, I. Giongo, H. Derakhshan, and J. Ingham. 2018. Predicted versus experimental out-of-plane force-displacement behaviour of unreinforced masonry walls. Structures. 15: 292–306. Elsevier. doi:10.1016/j.istruc.2018.07.012.
  • Walsh, K. Q., D. Y. Dizhur, I. Giongo, H. Derakhshan, and J. M. Ingham. 2017. Effect of boundary conditions and other factors on URM wall out-of-plane behaviour: Design demands, predicted capacity and in-situ proof test results. SESOC Journal 30 (1): 57–81.
  • Wilding, B. V., and K. Beyer. 2018. Analytical and empirical models for predicting the drift capacity of modern unreinforced masonry walls. Earthquake Engineering and Structural Dynamics 47 (10): 2012–31. doi: 10.1002/eqe.3053.
  • Willis, C. R., M. C. Griffith, and S. J. Lawrence. 2006. Moment capacities of unreinforced masonry sections in bending. Australian Journal of Structural Engineering 6 (2): 133–46. doi: 10.1080/13287982.2006.11464950.
  • Yi, T., F. L. Moon, R. T. Leon, and L. F. Kahn. 2006. Lateral load tests on a two-story unreinforced masonry building. Journal of Structural Engineering 132 (5): 643–52. doi: 10.1061/(ASCE)0733-9445(2006)132:5(643).
  • Yi, T., F. L. Moon, R. T. Leon, and L. F. Kahn. 2008. Flange effects on the nonlinear behaviour of URM piers. The Masonry Society Journal 26 (2): 31–42.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.