95
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Nonlinear Response Study and a Rotational Spring Model for Degrading Cyclic Behavior of Interior Reinforced Concrete Connections

&
Pages 2225-2250 | Received 15 Nov 2018, Accepted 14 Apr 2020, Published online: 05 May 2020

References

  • Abbasnia, M. H. 2017. Study of cyclic behavior of reinforced concrete interior connections and an equivalent numerical model for joints. M.Sc. thesis, Department of Civil Engineering, Isfahan University of Technology, Isfahan 8415683111, Iran.
  • ACI 374.1-05. 2005. Acceptance criteria for moment frames based on structural testing and commentary. Farmington Hills, Michigan: American Concrete Institute.
  • ACI-ASCE Committee 352. 1985. Recommendations for design of beam-column joints in monolithic reinforced concrete structures. ACI Journal 82 (3): 226–83.
  • Alath, S., and S. K. Kunnath. 1995. Modeling inelastic shear deformations in RC beam-column joints. Tenth Conference on Engineering Mechanics, 822–25. University of Colorado: Boulder.
  • Allahabadi, R., and G. H. Powell. 1988. DRAIN-2DX user guide. UCB/EERC-88/06, March, 262.
  • ASCE/SEI 41. 2013. Seismic rehabilitation of existing buildings. Reston, Virginia: American Society of Civil Engineers.
  • Bao, Y., S. K. Kunnath, S. E. Tawi, and H. S. Lew. 2008. Macromodel-based simulation of progressive collapse: RC frame structures. Journal of Structural Engineering 134 (7): 1079–91. doi: https://doi.org/10.1061/(ASCE)0733-9445(2008)134:7(1079).
  • Biddah, A., and A. Ghobarah. 1999. Modeling of shear deformation and bond slip in reinforced concrete joints. Journal of Structural Engineering and Mechanics 7 (4): 413–32. doi: https://doi.org/10.12989/sem.1999.7.4.413.
  • Birely, A., L. Lowes, and D. E. Lehman. 2010. Practical linear and nonlinear models of reinforced concrete beam-column joints in existing structures. Proceedings of the 9th U.S. National and 10th Canadian Conference on Earthquake Engineering, Toronto, Ontario, Canada. Paper No. 694.
  • Bjerkeli, L., A. Tomaszewicz, and J. J. Jensen. 1990. Deformation properties and ductility of high-strength concrete. High-Strength Concrete: Second International Symposium, 215–38, Detroit, MI: American Concrete Institute.
  • D’Amato, M., F. Braga, R. Gigliotti, S. Kunnath, and M. Laterza. 2012. A numerical general-purpose confinement model for non-linear analysis of R/C members. Computers and Structures 102: 64–75. doi: https://doi.org/10.1016/j.compstruc.2012.03.007.
  • Desayi, P., K. T. S. A. Iyengar, and T. S. Reddy. 1978. Equation for stress-strain curve of concrete confined in circular steel spiral. Materials and Structures 11 (65): 339–45.
  • European Union. EN 1992-1-1Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings. The European Union Per Regulation 305/2011, Directive 98/34/EC, Directive 2004/18/EC, 2004.
  • Favvata, M. J., B. A. Izzuddin, and C. G. Karayannis. 2008. Modelling exterior beam–column joints for seismic analysis of RC frame structures. Earthquake Engineering and Structural Dynamics 37 (13): 1527–48. doi: https://doi.org/10.1002/eqe.826.
  • Favvata, M. J., and C. G. Karayannis. 2014. Influence of pinching effect of exterior joints on the seismic behavior of RC frames. Journal of Earthquakes and Structures 6 (1): 89–110. doi: https://doi.org/10.12989/eas.2014.6.1.089.
  • FEMA. 2007. Interim protocols for determining seismic performance characteristics of structural and nonstru1ctural components through laboratory testing. FEMA 461, Federal Emergency Management Agency.
  • Giberson, M. F. 1969. Two nonlinear beams with definitions of ductility. Journal of the Structural Division, ASCE 95: 137–57.
  • Izzuddin, B. A. 1991. Nonlinear dynamic analysis of framed structures. Department of Civil Engineering, Imperial College, University of London. London, UK: Imperial College.
  • Izzuddin, B. A., and A. S. Elnashai. 1989. ADAPTIC: A program for the adaptive dynamic analysis of space frames. Report No. ESEE-89/7, London: Imperial College.
  • Izzuddin, B. A., C. G. Karayannis, and A. S. Elnashai. 1994. Advanced nonlinear formulation for reinforced concrete beam-columns. Journal of Structural Engineering, ASCE 120 (10): 2913–34. doi: https://doi.org/10.1061/(ASCE)0733-9445(1994)120:10(2913).
  • Jeremic, B., and Y. Bao. 2005. Modeling of reinforced concrete beam-column joint. ECI 248 Term Project Report, Civil and Environmental Engineering Department, Davis: University of California.
  • Kaklauskas, G., and J. Ghaboussi. 2001. Stress-strain relations for cracked tensile concrete from RC beam tests. Journal of Structural Engineering 127 (1): 64–73. doi: https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(64).
  • Karayannis, C. G., B. A. Izzuddin, and A. S. Elnashai. 1994. Application of adaptive analysis to reinforced concrete frames. Journal of Structural Engineering, ASCE 120 (10): 2935–57. doi: https://doi.org/10.1061/(ASCE)0733-9445(1994)120:10(2935).
  • Kent, D. C., and R. Park. 1971. Flexural members with confined concrete. ASCE Journal of the Structural Division 97 (7): 1969–90.
  • Li, B., R. Park, and H. Tanaka. 2000. Constitutive behavior of high-strength concrete under dynamic loads. ACI Structural Journal 97 (4): 619–29.
  • Lowes, L. N., and A. Altoontash. 2003. Modeling reinforced-concrete beam-column joints subjected to cyclic loading. Journal of Structural Engineering 129 (12): 1686–97. doi: https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1686).
  • Lowes, L. N., N. Mitra, and A. Altoontash. 2003. A beam-column joint model for simulating the earthquake response of reinforced concrete frames. USA: Pacific Earthquake Engineering Research Center, College of Engineering, University of California.
  • Mander, J. B., M. J. Priestley, and R. Park. 1988. Observed stress-strain behavior of confined concrete. Journal of Structural Engineering 114 (8): 1827–49. doi: https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1827).
  • Milburn, J. R., and R. Park. 1982. Behavior of reinforced concrete beam-column joints designed to NZS 3101, Research Report No. 82-7, Christchurch, New Zealand: Department of Civil Engineering, University of Canterbury, 107.
  • Omidi, M., and F. Behnamfar. 2015. A Fmerical model for simulation of RC beam-columns connections. Journal of Engineering Structures 88: 51–73. doi: https://doi.org/10.1016/j.engstruct.2015.01.025.
  • OpenSees. 2019. Open system for earthquake engineering simulation. Berkeley: Pacific Earthquake Engineering Research Center, University of California.
  • OpenSees Users’s Manual, V 2.0. 2019. Pacific earthquake engineering research center. Berkeley: University of California.
  • Park, R., and D. Ruitong. 1988. A comparison of the behavior of reinforced concrete beam column joints designed for ductility and limited ductility. Bulletin of the New-Zealand Society for Earthquake Engineering 21 (4): 255–78. doi: https://doi.org/10.5459/bnzsee.21.4.255-278.
  • Scott, B. D., R. Park, and M. J. N. Priestley. 1982. Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates. Journal of American Concrete Institute 79: 13–27.
  • Tajiri, S., H. Shiohara, and F. Kusuhara. A new macroelement of reinforced concrete beam-column joint for elasto-plastic plane frame analysis. In Eighth National Conference of Earthquake Engineering, San Francisco, CA 2006; Paper No. 674.
  • Torres, L., F. Lopez-Almansa, and L. M. Bozzo. 2004. Tension-stiffening model for cracked flexural concrete members. Journal of Structural Engineering 130 (8): 1242–51. doi: https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1242).
  • Walraven, J. C. 2008. Eurocode 2: Design of concrete structures EN1992-1-1. Symposium on Eurocodes: Backgrounds and Applications, Brussels, 18-20 February.
  • Xin, X. Z. 1992. Behavior of reinforced concrete interior beam-column joints designed using high strength concrete and steel. Research Report No. 92-3, Christchurch, New Zealand: Department of Civil Engineering, University of Canterbury.
  • Yousef, M., and A. Ghobarah. 2001. Modeling of RC beam-column joints and structural walls. Journal of Earthquake Engineering 5 (1): 93–111. doi: https://doi.org/10.1080/13632460109350387.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.