References
- Aida, H., Y. Tanimura, T. Tadokoro, and K. Takimoto. 2005. Cyclic loading experiment of precast columns of railway rigid-frame viaduct installed with NMB splice sleeves. Proceeding of the Japan Concrete Institute 27 (2): 613–18.
- Ameli, M. J., J. E. Parks, D. N. Brown, and C. P. Pantelides. 2015. Seismic evaluation of grouted splice sleeve connections for reinforced precast concrete column-to-cap beam joints in accelerated bridge construction. PCI Journal 60 (2): 80–103.
- Billington, S. L., R. W. Barnes, and J. E. Breen. 1999. A precast segmental substructure system for standard bridges. PCI Journal 44 (4): 56–73. doi: https://doi.org/10.15554/pcij.07011999.56.73.
- Brenes, F. J., S. L. Wood, and M. E. Kreger 2006. Anchorage requirements for grouted vertical-duct connectors in precast bent cap systems [Report]. No. FHWA/TX-06/0-4176-1.
- Bu, Z.-Y., Y.-C. Ou, J.-W. Song, N.-S. Zhang, and G.-C. Lee. 2015. Cyclic loading test of unbonded and bonded posttensioned precast segmental bridge columns with circular section. Journal of Bridge Engineering 21 (2): 04015043. doi: https://doi.org/10.1061/(ASCE)BE.1943-5592.0000807.
- Culmo, M. P. 2009. Connection details for prefabricated bridge elements and systems [Report]. No. FHWA-IF-09-010.
- Darwin, D., and S. Salamizavaregh 1993. Bond strength of grouted reinforcing bars. University of Kansas Center for Research Inc.
- Haber, Z. B., M. S. Saiidi, and D. H. Sanders. 2014. Seismic performance of precast columns with mechanically spliced column-footing connections. ACI Structural Journal 111 (3): 639. doi: https://doi.org/10.14359/51686624.
- Haber, Z. B., M. S. Saiidi, and D. H. Sanders. 2015. Behavior and simplified modeling of mechanical reinforcing bar splices. ACI Structural Journal 112 (2): 179. doi: https://doi.org/10.14359/51687455.
- Haraldsson, O. S., T. M. Janes, M. O. Eberhard, and J. F. Stanton. 2013. Seismic resistance of socket connection between footing and precast column. Journal of Bridge Engineering 18 (9): 910–19. doi: https://doi.org/10.1061/(ASCE)BE.1943-5592.0000413.
- Hose, Y. D., and F. Seible 1999. Performance evaluation database for concrete bridge components and systems under simulated seismic loads. Pacific Earthquake Engineering Research Center.
- Jansson, P. O. 2008. Evaluation of grout-filled mechanical splices for precast concrete construction [Report]. No. 07 TI-2094.
- Khaleghi, B., E. Schultz, S. Seguirant, L. Marsh, O. Haraldsson, and M. Eberhard. 2012. Accelerated bridge construction in Washington State. PCI Journal 57 (4): 34–49. doi: https://doi.org/10.15554/pcij.09012012.34.49.
- Li, T., H. Qu, Z. Wang, H. Wei, and S. Jiang. 2018. Seismic performance of precast concrete bridge columns with quasi-static cyclic shear test for high seismic zones. Engineering Structures 1 (166): 441–53.
- Marsh, M. L. 2011. Application of accelerated bridge construction connections in moderate to-high seismic regions. Transportation Research Board.
- Matsumoto, E. E. 2009a. Emulative precast bent cap connections for seismic regions: Component tests—Grouted duct specimen (unit 2). ECS Rep. No. ECS-CSUS-2009-02, California State Univ., Sacramento
- Matsumoto, E. E. 2009b. Emulative precast bent cap connections for seismic regions: Component tests—Cap pocket full ductility specimen (unit 3). ECS Rep. No. ECSCSUS-2009-03, California State Univ., Sacramento.
- Ou, Y.-C. 2007. Precast segmental post-tensioned concrete bridge columns for seismic regions. Doctoral diss., State University of New York, Buffalo.
- Ou, Y.-C., -P. H. Wang, M.-S. Tsai, K.-C. Chang, and G.-C. Lee. 2009. Large-scale experimental study of precast segmental unbonded posttensioned concrete bridge columns for seismic regions. Journal of Structural Engineering 136 (3): 255–64. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000110.
- Pang, J. B., M. O. Eberhard, and J. F. Stanton. 2009. Large-bar connection for precast bridge bents in seismic regions. Journal of Bridge Engineering 15 (3): 231–39. doi: https://doi.org/10.1061/(ASCE)BE.1943-5592.0000081.
- Priestley, M. N., F. Seible, and G. M. Calvi. 1996. Seismic design and retrofit of bridges (Chapters 1 and 5). New York: John Wiley & Sons.
- Raynor, D. J. 2000. Bond assessment of hybrid frame continuity reinforcement. Doctoral diss., University of Washington, Seattle.
- Raynor, D. J., D. E. Lehman, and J. F. Stanton. 2002. Bond-slip response of reinforcing bars grouted in ducts. Structural Journal 99 (5): 568–76.
- Rowell, S. P., C. E. Grey, S. C. Woodson, and K. P. Hager. 2009. High strain-rate testing of mechanical couplers. Vicksburg MS: Engineer Research and Development Center.
- Steuck, K. P., M. O. Eberhard, and J. F. Stanton. 2009. Anchorage of large-diameter reinforcing bars in ducts. ACI Structural Journal 106 (4): 506.
- Tazarv, M. 2014. Next generation of bridge columns for accelerated bridge construction in high seismic zones. Doctoral diss., University of Nevada, Reno, Reno.
- Tazarv, M., and M. S. Saiidi. 2015. UHPC-filled duct connections for accelerated bridge construction of RC columns in high seismic zones. Engineering Structures 15 (99): 413–22. doi: https://doi.org/10.1016/j.engstruct.2015.05.018.
- Wang, Z., T. Li, H. Qu, H. Wei, and Y. Li. 2019. Seismic performance of precast bridge columns with socket and pocket connections based on Quasi-Static cyclic tests: Experimental and numerical study. Journal of Bridge Engineering 24 (11): 04019105. doi: https://doi.org/10.1061/(ASCE)BE.1943-5592.0001463.
- Wang, Z., H. Qu, T. Li, H. Wei, H. Wang, H. Duan, and H. Jiang. 2018. Quasi-static cyclic tests of precast bridge columns with different connection details for high seismic zones. Engineering Structures 1 (158): 13–27. doi: https://doi.org/10.1016/j.engstruct.2017.12.035.
- Zhou, Y., Y.-C. Ou, and G. C. Lee. 2017. Bond-slip responses of stainless reinforcing bars in grouted ducts. Engineering Structures 15 (141): 651–65. doi: https://doi.org/10.1016/j.engstruct.2017.03.049.
- Zhou, Y., Y.-C. Ou, G. C. Lee, and J. S. O’Connor. 2010. Mechanical and low-cycle fatigue behavior of stainless reinforcing steel for earthquake engineering applications. Earthquake Engineering and Engineering Vibration 9 (3): 449–57. doi: https://doi.org/10.1007/s11803-010-0028-y.