References
- ASCE (American Society of Civil Engineers). 2005. Minimum design loads for buildings and other structures. ASCE 7-05. Reston, VA.
- ASCE (American Society of Civil Engineers). 2007. Seismic rehabilitation of existing buildings. Reston, VA: ASCE/SEI 41-06.
- ASCE (American Society of Civil Engineers). 2010. Minimum design loads for buildings and other structures. Reston, VA: ASCE 7-10.
- Christopoulos, C., R. Tremblay, H. J. Kim, and M. Lacerte. 2008. Self-centering energy dissipative bracing system for the seismic resistance of structures: Development and validation. Journal of Structural Engineering 134 (1): 96–107. doi: https://doi.org/10.1061/(asce)0733-9445(2008)134:1(96).
- Dwairi, H. M., M. J. Kowalsky, and J. M. Nau. 2007. Equivalent damping in support of direct displacement-based design. Journal of Earthquake Engineering 11 (4): 512–30. doi: https://doi.org/10.1080/13632460601033884.
- Erochko, J., C. Christopoulos, and R. Tremblay. 2015. Design, testing, and detailed component modeling of a high-capacity self-centering energy-dissipative brace. Journal of Structural Engineering 141 (8). doi: https://doi.org/10.1061/(asce)st.1943-541x.0001166.
- FEMA (Federal Emergency Management Agency). 2005. Improvements of nonlinear static seismic analysis procedures. Washington, DC: FEMA 440.
- FEMA (Federal Emergency Management Agency). 2008. Quantification of Building Seismic Performance Factors. Washington, DC: FEMA P695.
- FEMA (Federal Emergency Management Agency). 2012. Seismic Performance Assessment of Buildings. Washington, DC: FEMA P-58.
- GB/T 1222-2016. 2016. Spring steels. Beijing: National Standardization Administration of China.
- GB/T 699-2015. 2015. Quality carbon structure steels. Beijing: National Standardization Administration of China.
- GJBT-1092. 2009. Design of building structures with energy dissipation devices. Beijing: China Architecture & Building Press.
- Golzar, F. G., G. W. Rodgers, and J. G. Chase. 2018a. Nonlinear spectral analysis for structures with re-centring D3 viscous dissipaters. Journal of Earthquake Engineering 1–17. doi: https://doi.org/10.1080/13632469.2018.1466742.
- Golzar, F. G., G. W. Rodgers, and J. G. Chase. 2018b. Design and experimental validation of a re-centring viscous dissipater. Structures 13: 193–200. doi: https://doi.org/10.1016/j.istruc.2017.12.008.
- Guo, T., G. D. Zhang, and C. Chen. 2014. Experimental study on self-centering concrete wall with distributed friction devices. Journal of Earthquake Engineering 18 (2): 214–30. doi: https://doi.org/10.1080/13632469.2013.844211.
- Hayashi, K., K. A. Skalomenos, H. Inamasu, and Y. B. Luo. 2018. Self-centering rocking composite frame using double-skin concrete-filled steel tube columns and energy-dissipating fuses in multiple locations. Journal of Structural Engineering 144 (9): 13. doi: https://doi.org/10.1061/(asce)st.1943-541x.0002157.
- Jacobsen, L. S. 1930. Steady forced vibrations as influenced by damping. ASME Transactions 52 (1): 169–81.
- Jafari, A., M. R. Ghasemi, H. A. Bengar, and B. Hassani. 2018. Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio. Bulletin of Earthquake Engineering 16 (2): 831–58. doi: https://doi.org/10.1007/s10518-017-0227-2.
- Kam, W. Y., S. Pampanin, A. Palermo, and A. J. Carr. 2010. Self-centering structural systems with combination of hysteretic and viscous energy dissipations. Earthquake Engineering & Structural Dynamics n/a-n/a. doi: https://doi.org/10.1002/eqe.983.
- Karavasilis, T. L., T. Blakeborough, and M. S. Williams. 2011. Development of nonlinear analytical model and seismic analyses of a steel frame with self-centering devices and viscoelastic dampers. Computers & Structures 89 (11–12): 1232–40. doi: https://doi.org/10.1016/j.compstruc.2010.08.013.
- Karavasilis, T. L., and C. Y. Seo. 2011. Seismic structural and non-structural performance evaluation of highly damped self-centering and conventional systems. Engineering Structures 33 (8): 2248–58. doi: https://doi.org/10.1016/j.engstruct.2011.04.001.
- Kitayama, S., and M. C. Constantinou. 2016a. Design and analysis of buildings with fluidic self-centering systems. Journal of Structural Engineering 142 (11): 04016105. doi: https://doi.org/10.1061/(asce)st.1943-541x.0001583.
- Kitayama, S., and M. C. Constantinou. 2016b. Development and evaluation of procedures for analysis and design of buildings with fluidic self-centering system. In MCEER-16-0003. Buffalo, NY: Multidisciplinary Center for Earthquake Engineering Research.
- Kitayama, S., and M. C. Constantinou. 2016c. Seismic response analysis of single-degree-of-freedom yielding structures with fluidic self-centering systems. Engineering Structures 125: 266–79. doi: https://doi.org/10.1016/j.engstruct.2016.06.057.
- Kitayama, S., and M. C. Constantinou. 2017. Fluidic Self-Centering Devices as Elements of Seismically Resistant Structures: Description, Testing, Modeling, and Model Validation. Journal of Structural Engineering 143 (7): 04017050. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001787.
- Kowalsky, M. J., M. J. N. Priestley, and G. A. Macrae. 1995. Displacement-based design of RC bridge columns in seismic regions. Earthquake Engineering & Structural Dynamics 24 (12): 1623–43. doi: https://doi.org/10.1002/eqe.4290241206.
- Liu, L., S. Li, and J. Zhao. 2018. A novel non-iterative direct displacement-based seismic design procedure for self-centering buckling-restrained braced frame structures. Bulletin of Earthquake Engineering 16 (11): 5591–619. doi: https://doi.org/10.1007/s10518-018-0408-7.
- Lu, X., C. Jiang, B. Yang, and L. Quan. 2019. Seismic design methodology for self-centering reinforced concrete frames. Soil Dynamics and Earthquake Engineering 119: 358–74. doi: https://doi.org/10.1016/j.soildyn.2018.07.002.
- Pacific Earthquake Engineering Research Center. 2016. Open system for earthquake engineering simulation (version 2.5.0). Berkeley, CA: Pacific Earthquake Engineering Research Center.
- Priestley, M. J. N., G. M. Calvi, and M. J. Kowalsky. 2007. Displacement–based seismic design of structures. Pavia, Italy: IUSS Press.
- Qiu, C. X., and S. Zhu. 2017. Performance-based seismic design of self-centering steel frames with SMA-based braces. Engineering Structures 130: 67–82. doi: https://doi.org/10.1016/j.engstruct.2016.09.051.
- Rahgozar, N., A. S. Moghadam, and A. Aziminejad. 2016. Inelastic displacement ratios of fully self-centering controlled rocking systems subjected to near-source pulse-like ground motions. Engineering Structures 108: 113–33. doi: https://doi.org/10.1016/j.engstruct.2015.11.030.
- Rahgozar, N., N. Rahgozar, and A. S. Moghadam. 2019. Equivalent linear model for fully self-centering earthquake-resisting systems. The Structural Design of Tall and Special Buildings 28 (1): e1565. doi: https://doi.org/10.1002/tal.1565.
- Ramirez, O. M., M. C. Constantinou, C. A. Kircher, A. S. Whittaker, M. W. Johnson, J. D. Gomez, and C. Z. Chrysostomou. 2001. Development and evaluation of simplified procedures for analysis and design of buildings with passive energy dissipation systems. In MCEER-00-0010. Buffalo, NY: Multidisciplinary Center for Earthquake Engineering Research.
- Reinhorn, A. M., C. Li, and M. C. Constantinou. 1995. Experimental and analytical investigation of seismic retrofit of structures with supplemental damping, part I fluid viscous damping devices. In NCEER-95-0001. Buffalo, NY: National Center for Earthquake Engineering Research.
- Ringfeder, G. 2016. Damping Technology, Krefeld. Germany: Ringfeder VBG GMBH.
- Silwal, B., R. J. Michael, and O. E. Ozbulut. 2015. A superelastic viscous damper for enhanced seismic performance of steel moment frames. Engineering Structures 105: 152–64. doi: https://doi.org/10.1016/j.engstruct.2015.10.005.
- Steele, T. C., and L. D. A. Wiebe. 2016. Dynamic and equivalent static procedures for capacity design of controlled rocking steel braced frames. Earthquake Engineering & Structural Dynamics 45 (14): 2349–69. doi: https://doi.org/10.1002/eqe.2765.
- Taylor, D. 2020. Fluid Viscous Dampers. United States: Taylor Devices Inc.
- Tsopelas, P., M. C. Constantinou, C. A. Kircher, and A. S. Whittaker. 1997. Evaluation of simplified methods of analysis for yielding structures. In NCEER-97-0012. Buffalo, NY: National Center for Earthquake Engineering Research.
- Wang, W., C. Fang, and J. Liu. 2017. Self-centering beam-to-column connections with combined superelastic SMA bolts and steel angles. Journal of Structural Engineering 143 (2): 16. doi: https://doi.org/10.1061/(asce)st.1943-541x.0001675.
- Wang, W., C. Fang, X. Yang, Y. Y. Chen, J. Ricles, and R. Sause. 2017. Innovative use of a shape memory alloy ring spring system for self-centering connections. Engineering Structures 153: 503–15. doi: https://doi.org/10.1016/j.engstruct.2017.10.039.
- Wiebe, L., and C. Christopoulos. 2015. Performance-based seismic design of controlled rocking steel braced frames. I: Methodological framework and design of base rocking joint. Journal of Structural Engineering 141 (9). doi: https://doi.org/10.1061/(asce)st.1943-541x.0001202.
- Zhang, C., T. R. C. Steele, and L. D. A. Wiebe. 2018. Design-level estimation of seismic displacements for self-centering SDOF systems on stiff soil. Engineering Structures 177: 431–43. doi: https://doi.org/10.1016/j.engstruct.2018.09.067.
- Zhang, Y., H. Liu, and D. Wang. 2008. Spring handbook. 2 ed. Beijing: Mechanical Industry Press.