Experimental and Numerical Investigation of a Disc-Spring Damage Avoidance Device in Self-Centering Slotted Beam Connections

References

• ACI374.1-05. 2005. Acceptance criteria for moment frames based on structural testing and commentary: An ACI standard. Farmington Hills, Michigan: American Concrete Institute.
   Google Scholar
• Andrawes, B., and R. DesRoches. 2007. Effect of ambient temperature on the hinge opening in bridges with shape memory alloy seismic restrainers. Engineering Structures 29 (9):2294–301. doi:10.1016/j.engstruct.2006.11.028.
   Web of Science ®Google Scholar
• Au, E. V. 2010. The Mechanics and Design of a Non-Tearing Floor Connection Using Slotted Reinforced Concrete Beams. MS.c thesis., University of Canterbury
   Google Scholar
• Bagheri, H., A. Hashemi, S. M. M. Yousef-Beik, P. Zarnani, and P. Quenneville. 2020. New self-centering tension-only brace using resilient slip friction joint: Experimental tests and numerical analysis. Journal of Structural Engineering 146 (10):04020219. doi:10.1061/(ASCE)ST.1943-541X.0002789.
   Web of Science ®Google Scholar
• Balan, T. A., F. C. Filippou, and E. P. Popov. 1998. Hysteretic model of ordinary and high-strength reinforcing steel. Journal of Structural Engineering 124 (3):288–97. doi:10.1061/(ASCE)0733-9445(1998)124:3(288).
   Web of Science ®Google Scholar
• Bradley, B. A., R. P. Dhakal, J. B. Mander, and L. Li. 2008. Experimental multi-level seismic performance assessment of 3D RC frame designed for damage avoidance. Earthquake Engineering & Structural Dynamics 37 (1):1–20. doi:10.1002/eqe.741.
   Web of Science ®Google Scholar
• Brookshire, D. S., S. E. Chang, H. Cochrane, R. A. Olson, A. Rose, and J. Steenson. 1997. Direct and indirect economic losses from earthquake damage. Earthquake Spectra 13 (4):683–701. doi:10.1193/1.1585975.
   Google Scholar
• Byrne, J. 2012. Bond and Shear Mechanics Within Reinforced Concrete Beam-Column Joints Incorporating The Slotted Beam Detail. Ms.c Thesis., University Of Canterbury.
   Google Scholar
• Cai, X., Z. Pan, Y. Zhu, N. Gong, and Y. Wang. 2021. Experimental and numerical investigations of self-centering post-tensioned precast beam-to-column connections with steel top and seat angles. Engineering Structures 226:111397. doi:10.1016/j.engstruct.2020.111397.
   Web of Science ®Google Scholar
• Carr, A. J. 2008. Ruaumoko manual, volume 2: User manual for the 2-dimensional version Ruaumoko2D. Technical report, University of Canterburry, Christchurch, New Zealand.
   Google Scholar
• Christopoulos, C., R. Tremblay, H.-J. Kim, and M. Lacerte. 2008. Self-centering energy dissipative bracing system for the seismic resistance of structures: Development and validation. Journal of Structural Engineering 134 (1):96–107. doi:10.1061/(ASCE)0733-9445(2008)134:1(96).
   Web of Science ®Google Scholar
• Cosenza, E., F. De Cicco, and A. Prota. 2010. Discussion of “nonlinear uniaxial material model for reinforcing steel bars” by Sashi K. Kunnath, YeongAe Heo, and Jon F. Mohle. Journal of Structural Engineering 136 (7):917–18. doi:10.1061/(ASCE)ST.1943-541X.0000119.
   Web of Science ®Google Scholar
• Cui, Y., X. Lu, and C. Jiang. 2017. Experimental investigation of tri-axial self-centering reinforced concrete frame structures through shaking table tests. Engineering Structures 132:684–94. doi:10.1016/j.engstruct.2016.11.066.
   Web of Science ®Google Scholar
• Curadelli, R. O., and J. D. Riera. 2004. Reliability based assessment of the effectiveness of metallic dampers in buildings under seismic excitations. Engineering Structures 26 (13):1931–38. doi:10.1016/j.engstruct.2004.07.004.
   Web of Science ®Google Scholar
• Demblon, A., O. Karakoc, J. Sam, D. Zhao, K. C. Atli, J. H. Mabe, and I. Karaman. 2022. Compositional and microstructural sensitivity of the actuation fatigue response in NiTihf high temperature shape memory alloys. Materials Science and Engineering: A 838:142786. doi:10.1016/j.msea.2022.142786.
   Web of Science ®Google Scholar
• Dodd, L., and J. Restrepo-Posada. 1995. Model for predicting cyclic behavior of reinforcing steel. Journal of Structural Engineering 121 (3):433–45. doi:10.1061/(ASCE)0733-9445(1995)121:3(433).
   Web of Science ®Google Scholar
• Dolce, M., and D. Cardone. 2001. Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension. International Journal of Mechanical Sciences 43 (11):2657–77. doi:10.1016/S0020-7403(01)00050-9.
   Web of Science ®Google Scholar
• Erochko, J., C. Christopoulos, and R. Tremblay. 2013. Detailed component modelling of a self-centering energy-dissipative brace system. Proc. 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics, Kos Island, Greece.
   Google Scholar
• Fang, C., W. Wang, and D. Shen. 2021. Development and experimental study of disc spring–based self-centering devices for seismic resilience. Journal of Structural Engineering 147 (7):04021094. doi:10.1061/(ASCE)ST.1943-541X.0003058.
   Web of Science ®Google Scholar
• Fang, C., X. Zhou, A. I. Osofero, Z. Shu, and M. Corradi. 2016. Superelastic SMA Belleville washers for seismic resisting applications: Experimental study and modelling strategy. Smart Materials and Structures 25 (10):105013. doi:10.1088/0964-1726/25/10/105013.
   Web of Science ®Google Scholar
• Fenwick, R., and L. Megget. 1993. Elongation and load deflection characteristics of reinforced concrete members containing plastic hinges. Bulletin of the New Zealand National Society for Earthquake Engineering 26 (1):28–41. doi:10.5459/bnzsee.26.1.28-41.
   Google Scholar
• Giao, R., V. Lucio, and C. Chastre. 2014. Assessing the behaviour of RC beams subject to significant gravity loads under cyclic loads. Engineering Structures 59:512–21. doi:10.1016/j.engstruct.2013.11.012.
   Web of Science ®Google Scholar
• Golondrino, J. C., J. Chase, G. Rodgers, G. MacRae, and C. Clifton. 2012a. Velocity dependence of HF2V devices using different shaft configurations. New Zealand Society of Earthquake Engineering Conference, Christchurch, New Zealand, University of Canterbury
   Google Scholar
• Golondrino, J. C., J. Chase, G. Rodgers, G. MacRae, and C. Clifton. 2012b. Velocity effects on the behaviour of high-force-to-volume lead dampers (HF2V) using different shaft configurations. Proceedings of the 15 WCEE, Lisboa.
   Google Scholar
• Javanmardi, A., Z. Ibrahim, K. Ghaedi, H. B. Ghadim, and M. U. Hanif. 2020. State-of-the-art review of metallic dampers: Testing, development and implementation. Archives of Computational Methods in Engineering 27 (2):455–78. doi:10.1007/s11831-019-09329-9.
   Web of Science ®Google Scholar
• Lu, X., Y. Cui, J. Liu, and W. Gao. 2015. Shaking table test and numerical simulation of a 1/2‐scale self‐centering reinforced concrete frame. Earthquake Engineering & Structural Dynamics 44 (12):1899–917. doi:10.1002/eqe.2560.
   Web of Science ®Google Scholar
• Mander, J., and C. Cheng. 1997. Seismic resistance of bridge piers based on damage avoidance design. Buffalo, NY: State University of New York.
   Google Scholar
• Mander, T. J., G. W. Rodgers, J. G. Chase, J. B. Mander, G. A. MacRae, and R. P. Dhakal. 2009. Damage avoidance design steel beam-column moment connection using high-force-to-volume dissipators. Journal of Structural Engineering 135 (11):1390–97. doi:10.1061/(ASCE)ST.1943-541X.0000065.
   Web of Science ®Google Scholar
• Matthews, J., J. Mander, and D. Bull. 2004. Prediction of beam elongation in structural concrete members using a rainflow method. New Zealand Society of Earthquake Engineering Conference, Christchurch, New Zealand, University of Canterbury
   Google Scholar
• McKenna, F., G. Fenves, and M. Scott. 2000. Open system for earthquake engineering simulation. Berkeley, CA: University of California.
   Google Scholar
• Menegotto, M. 1973. Method of analysis for cyclically loaded RC plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending. Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, , International Association for Bridge and Structural Engineering, 15–22. Zurich, Switzerland.
   Google Scholar
• Mubea. 2019. Disc springs tool. https://mubea-discsprings.com/disc-spring-calculator-tool
   Google Scholar
• Muir, C. A. 2014. Seismic Performance of the Slotted Beam Detail in Reinforced Concrete Moment Resisting Frames. Ph.D thesis., University of Canterbury.
   Google Scholar
• Ohkubo, M. 1999. Shear transfer mechanism of reinforced concrete beams with a slot at the beam-end. Collection of Annual Papers on Concrete Engineering 21 (3):523–28.
   Google Scholar
• Oudah, F., and R. El-Hacha. 2017. Plastic hinge relocation in concrete structures using the double-slotted-beam system. Bulletin of Earthquake Engineering 15 (5):2173–99. doi:10.1007/s10518-016-0055-9.
   Web of Science ®Google Scholar
• Oudah, F., and R. El Hacha. 2018. Innovative self-centering concrete beam-column connection reinforced using shape memory alloy. ACI Structural Journal 115 (3). doi:10.14359/51702132.
   Web of Science ®Google Scholar
• Oudah, F., and E.-H. Raafat. 2017. Seismic performance of modified single-slotted-beam concrete connection. Journal of Earthquake Engineering 21 (5):726–51. doi:10.1080/13632469.2016.1206760.
   Web of Science ®Google Scholar
• Parulekar, Y. M., G. Reddy, K. Vaze, and H. Kushwaha. 2004. Lead extrusion dampers for reducing seismic response of coolant channel assembly. Nuclear Engineering and Design 227 (2):175–83. doi:10.1016/j.nucengdes.2003.09.006.
   Web of Science ®Google Scholar
• Peng, B. H., R. P. Dhakal, R. C. Fenwick, A. J. Carr, and D. K. Bull. 2011. Elongation of plastic hinges in ductile RC members: Model development. Journal of Advanced Concrete Technology 9 (3):315–26. doi:10.3151/jact.9.315.
   Web of Science ®Google Scholar
• Priestley, M. N. 1991. Overview of PRESSS research program. Precast/Prestressed Concrete Institute 36 (4):50–57. doi:10.15554/pcij.07011991.50.57.
   Google Scholar
• Prota, A., F. De Cicco, and E. Cosenza. 2009. Cyclic behavior of smooth steel reinforcing bars: Experimental analysis and modeling issues. Journal of Earthquake Engineering 13 (4):500–19. doi:10.1080/13632460902837686.
   Web of Science ®Google Scholar
• Ramirez, C., A. Liel, J. Mitrani‐reiser, C. Haselton, A. Spear, J. Steiner, G. Deierlein, and E. Miranda. 2012. Expected earthquake damage and repair costs in reinforced concrete frame buildings. Earthquake Engineering & Structural Dynamics 41 (11):1455–75. doi:10.1002/eqe.2216.
   Web of Science ®Google Scholar
• Robinson, W., and L. Greenbank. 1976. An extrusion energy absorber suitable for the protection of structures during an earthquake. Earthquake Engineering & Structural Dynamics 4 (3):251–59. doi:10.1002/eqe.4290040306.
   Google Scholar
• Rodgers, G. 2009. Next generation structural technologies: implementing high force-to-volume energy absorbers. Christchurch, New Zealand: University of Canterbury.
   Google Scholar
• Rodgers, G., J. Chase, D. Heaton, and L. Cleeve. 2013. Testing of lead extrusion damping devices undergoing representative earthquake velocities. New Zealand Society of Earthquake Engineering Conference, Christchurch, New Zealand, University of Canterbury
   Google Scholar
• Rodgers, G. W., J. G. Chase, and J. B. Mander. 2019. Repeatability and high-speed validation of supplemental lead-extrusion energy dissipation devices. Advances in Civil Engineering 2019:1–13. doi:10.1155/2019/7935026.
   Web of Science ®Google Scholar
• Rodgers, G. W., J. B. Mander, and J. G. Chase. 2011. Semi‐explicit rate‐dependent modeling of damage‐avoidance steel connections using HF2V damping devices. Earthquake Engineering & Structural Dynamics 40 (9):977–92. doi:10.1002/eqe.1073.
   Web of Science ®Google Scholar
• Rodgers, G. V., J. Mander, and J. Chase. 2018. Precision design modelling of HF2V devices. Structures 14:243–50. doi:10.1016/j.istruc.2018.03.007.
   Web of Science ®Google Scholar
• Rodgers, G. W., J. B. Mander, J. G. Chase, and R. P. Dhakal. 2016. Beyond ductility: Parametric testing of a jointed rocking beam-column connection designed for damage avoidance. Journal of Structural Engineering 142 (8). doi:10.1061/(ASCE)ST.1943-541X.0001318.
   PubMed Web of Science ®Google Scholar
• Rodgers, G. W., J. B. Mander, and J. Geoffrey Chase. 2012. Modeling cyclic loading behavior of jointed precast concrete connections including effects of friction, tendon yielding and dampers. Earthquake Engineering & Structural Dynamics 41 (15):2215–33. doi:10.1002/eqe.2183.
   Web of Science ®Google Scholar
• Rodgers, G. W., K. M. Solberg, J. G. Chase, J. B. Mander, B. A. Bradley, R. P. Dhakal, and L. Li. 2008. Performance of a damage‐protected beam–column subassembly utilizing external HF2V energy dissipation devices. Earthquake Engineering & Structural Dynamics 37 (13):1549–64. doi:10.1002/eqe.830.
   Web of Science ®Google Scholar
• Rodgers, G. W., K. M. Solberg, J. B. Mander, J. G. Chase, B. A. Bradley, and R. P. Dhakal. 2010. High-force-to-volume seismic dissipators embedded in a jointed precast concrete frame. Journal of Structural Engineering 138 (3):375–86. doi:10.1061/(ASCE)ST.1943-541X.0000329.
   Web of Science ®Google Scholar
• Sideris, P., A. J. Aref, and A. Filiatrault. 2014. Quasi-static cyclic testing of a large-scale hybrid sliding-rocking segmental column with slip-dominant joints. Journal of Bridge Engineering 19 (10):04014036. doi:10.1061/(ASCE)BE.1943-5592.0000605.
   Web of Science ®Google Scholar
• Skinner, R. I., W. H. Robinson, and G. H. McVerry. 1993. An introduction to seismic isolation, 70–85. New York: John Wiley & Sons.
   Google Scholar
• Song, L.-L., T. Guo, Y. Gu, and Z.-L. Cao. 2015. Experimental study of a self-centering prestressed concrete frame subassembly. Engineering Structures 88:176–88. doi:10.1016/j.engstruct.2015.01.040.
   Web of Science ®Google Scholar
• Vishnupriya, V., G. Rodgers, and J. Chase. 2022. Nonlinear finite-element modeling of HF2V lead extrusion damping devices: Generic design tool. Journal of Structural Engineering 148 (1):04021227. doi:10.1061/(ASCE)ST.1943-541X.0003170.
   Web of Science ®Google Scholar
• Wang, W., C. Fang, D. Shen, R. Zhang, J. Ding, and H. Wu. 2021. Performance assessment of disc spring-based self-centering braces for seismic hazard mitigation. Engineering Structures 242:112527. doi:10.1016/j.engstruct.2021.112527.
   Web of Science ®Google Scholar
• Wrzesniak, D., G. W. Rodgers, M. Fragiacomo, and J. G. Chase. 2016. Experimental testing of damage-resistant rocking glulam walls with lead extrusion dampers. Construction and Building Materials 102:1145–53. doi:10.1016/j.conbuildmat.2015.09.011.
   Web of Science ®Google Scholar
• Xu, L., X. Fan, and Z. Li. 2018. Hysteretic analysis model for pre-pressed spring self-centering energy dissipation braces. Journal of Structural Engineering 144 (7):04018073. doi:10.1061/(ASCE)ST.1943-541X.0002060.
   Web of Science ®Google Scholar
• Xu, L., S. Xiao, and Z. Li. 2020. Behaviors and modeling of new self-centering RC wall with improved disc spring devices. Journal of Engineering Mechanics 146 (9):04020102. doi:10.1061/(ASCE)EM.1943-7889.0001838.
   Web of Science ®Google Scholar
• Youssef, M., M. Alam, and M. Nehdi. 2008. Experimental investigation on the seismic behavior of beam-column joints reinforced with superelastic shape memory alloys. Journal of Earthquake Engineering 12 (7):1205–22. doi:10.1080/13632460802003082.
   Web of Science ®Google Scholar