Secondary dendrite arm spacings in magnesium alloy AZ91D: from plaster moulding to laser remelting

References

• G. Neite, K. Kubota, K. Higashi and F. Hehmann, “Magnesium-Based Alloys”, in Materials Science and Technology, 1996, 8, pp. 113–212.
   Google Scholar
• G. Nussbaum, H. Gjestland and G. Regazzoni, “Rapid solidification of magnesium alloys”, Proc. 45th Annual World Magnesium Conference, (International Magnesium Association, McLean, VA, 1988), pp. 19–24.
   Google Scholar
• D. L. Albright, “Current trends in the development and utilization of magnesium alloys”, Proc. 52nd Annual World Magnesium Conference, (International Magnesium Association, McLean, VA, 1995), pp. 30–37.
   Google Scholar
• M. O. Pekgüleryuz and M. M. Avedesian, “Magnesium alloying—Some metallurgical aspects”, in Magnesium Alloys and Their Applications, (DGM Verlag, Oberursel, Germany, 1992), pp. 213–220.
   Google Scholar
• B. Closset and F. Dimayuga, “Effect of alloy purity and surface treatment on corrosion of AZ91 castings”, in Magnesium Alloys and Their Applications, (DGM Verlag, Oberursel, Germany, 1992), pp. 143–150.
   Google Scholar
• A. Martineau, “ITM Advances Magnesium Die Casting Technologies”, Die Casting Engineer, Nov.—Dec. 1991, pp. 16–21.
   Google Scholar
• H. Sasaki, M. Adachi, T. Sakamoto, A. Takimoto, “Effect of solidified structure on the mechanical properties of AZ91 alloy”, Proc. 53rd Annual World Magnesium Conference, (International Magnesium Association, McLean, VA, 1996), pp. 86–92.
   Google Scholar
• H. Gjestland, G. Nussbaum, G. Regazzoni, O. Lohne and Ø. Bauger, “Stress-relaxation and creep behaviour of some rapidly solidified magnesium alloys”, Mater. Sci. Eng., 1991, A134, 1197–1200.
   Google Scholar
• R. S. Busk, “The pellet metallurgy of magnesium”, Light Metals, 1960, 23, 197–200.
   Google Scholar
• K. U. Kainer, “Properties of Consolidated Magnesium Alloy Powder”, Met. Powder Rep., 1990, 45, 684–687.
   Google Scholar
• C. Labrecque, R. Angers, R. Tremblay and D. Dubé, “Inverted disk centrifugal atomization of AZ91 magnesium alloy”, Canadian Metal. Quart. 1997, 36, 169–175.
   Web of Science ®Google Scholar
• H. Gjestland, G. Nussbaum and G. Regazzoni, “Mechanical properties and formability of rapidly solidified AZ91 based alloys”, in Proc. 46th Annual World Magnesium Conference, (International Magnesium Association, McLean, VA, 1989), pp. 72–78.
   Google Scholar
• G. Nussbaum and G. Regazzoni and H. Gjestland, “Magnesium alloys: rapid solidification reveals an enormous potential”, in Advanced Aluminum and Magnesium Alloys, (American Society for Metals, Metals Park, OH, 1990), pp. 789–796.
   Google Scholar
• M. R. Krishnadev, R. Angers, C. G. Krisnadas Nair and G. Huard, “The structure and properties of magnesium-matrix composites”, J. Metals, 1993, 45, 52–54.
   Google Scholar
• T. Z. Kattamis, “Solidification microstructure of laser processed alloys and its impact on some properties”, in Lasers in Metallurgy, (The Metallurgical Society of AIME, Warrendale, PA, 1981), pp.1–10.
   Google Scholar
• F. Hehmann and P. Tsakiropoulos, “Microstractural modelling for the development of laser-treated, gas-atomized and spray-formed magnesium alloys”, in Magnesium Alloys and Their Applications, (DGM Verlag, Oberursel, Germany, 1992), pp. 535–542
   Google Scholar
• M. Müller, J. Wächter and F. Sommer, “Microscopic conditions for the extension of solid solubility by rapid solidification”, in Magnesium Alloys and Their Applications, (DGM Verlag, Oberursel, Germany, 1992), pp. 527–534
   Google Scholar
• B. L. Mordike and W. Riehemann, “Mechanical properties and thermal stability of rapidly solidified magnesium alloys”, Key Eng. Mater., 1994, 97–98, 13–28.
   Google Scholar
• S. Kamado, M. Tsukuda, I. Tokutomi and K. Hirose, “Effect of solidification conditions on microstructure of unidirectionally solidified AZ91C alloy”, J. Jpn. Inst. Light Metals, 1987, 37, 714–720.
   Google Scholar
• K. Pettersen, O. Lohne and N. Ryum, “Dendritic Solidification of Magnesium Alloy AZ91”, Metall. Trans. A, 1990, 21A, 221–230.
   Web of Science ®Google Scholar
• H. M. Tensi and R. Rösch, “Unidirectional Solidification of the Mg-Alloys AZ91HP and AM50HP with Quenching of the Solidification Front”, in Magnesium Alloys and Their Applications, (DGM Verlag, Oberursel, Germany, 1992), pp. 283–289.
   Google Scholar
• Metals Handbook Ninth Edition, Vol. 15, (American Society for Metals, Metals Park, OH, 1988), pp. 242–247.
   Google Scholar
• N. Fantetti, “Plaster cast and sand cast magnesium prototypes—Advantages and limitations”, SAE Technical Paper Series 920067, 1992.
   Google Scholar
• P. Schmidt, “Heat transfer during filling in die casting processes”, Mater. Sci. Eng., 1993, A173, 271–274.
   Google Scholar
• R. Angers, R. Tremblay, L. Desrosiers and D. Dubé, “Rotating disks coatings for centrifugal atomization of aluminium and magnesium alloys”, Canadian Metal. Quart., 1996, 35, 291–297.
   Web of Science ®Google Scholar
• D. J. Hodkin, P. W. Sutcliffe, P. G. Mardon and L. E. Russell, “Centrifugal shot casting: a new atomization process for the preparation of high-purity alloy powders”, Powder Metall., 1973, 16, 277–313.
   Web of Science ®Google Scholar
• J. P. Holman, Heat Transfer, (McGraw-Hill, New York, 4th edition, 1976).
   Google Scholar
• Specific Heat—Nonmetallic Liquids and Gases, The TPRC Data Series- Vol.6, (IFI/Plenum Press, New York, 1970), pp. 3–23.
   Google Scholar
• Thermal Conductivity—Nonmetallic Liquids and Gases, The TPRC Data Series- Vol.3, (IFI/Plenum Press, New York, 1970), p. 251.
   Google Scholar
• L. E. Murr, Interfacial Phenomena in Metal and Alloys, (Addison-Wesley, Reading, MA, 1975), p.103.
   Google Scholar
• G. V. Raynor, The Physical Metallurgy of Magnesium and its Alloys, (Pergamon Press, New York, 1959), p. 13; 342.
   Google Scholar
• F. Bazile, in Techniques de l'Ingénieur, (Technique de l'Ingénieur, Paris, 1985), Form. M 453–2.
   Google Scholar
• Smithells Metals Reference Book, (Butterworth, 6th edition, London, 1983), p.14–3 to 14–12; 8–1; 8–41.
   Google Scholar
• O. Kubaschewski, C. B. Alcock and P. J. Spencer, Materials Thermochemistry, (Pergamon Press, Oxford, 1993), p. 257.
   Google Scholar
• J. L. Murray, “Al-Mg (Aluminum-Magnesium)”, in Phase Diagrams of Binary Magnesium Alloys, (ASM International, Metals Park, OH, 1988), pp. 17–34.
   Google Scholar
• T. Z. Kattamis, U. T. Holmberg and M. C. Flemings, “Influence of coarsening on dendrite arm spacing and grain size of magnesium-zinc alloy”, J. Inst. Metals, 1967, 95, 343–347.
   Google Scholar
• J. A. Horwath and L. F. Mondolfo, “Dendritic growth”, Acta Metall., 1962, 10, 1037–1042.
   Google Scholar
• D. Dubé, M. Fiset, R. Laliberté and R. Simoneau, Cavitation resistance improvement of IRECA steel via laser processing, Mater. Lett., 1996, 28, 93–99.
   Web of Science ®Google Scholar
• T. Z. Kattamis, J. C. Coughlin and M. C. Flemings, “Influence of coarsening on dendrite arm spacing of aluminum-copper alloys”, Trans. AIME, 1967, 239, 1504–1511.
   Google Scholar
• H. Jones, “The status of rapid solidification of alloys in research and applications”, J. Mater. Sci., 1984, 19, 1043–1076.
   Web of Science ®Google Scholar