Progress in solidification modeling of cast iron in China

References

• G. Upadhya, A.J. Paul, Solidification Modeling: A Phenomenological Review, AFS Transactions, 1994, Vol. 102, 69–80.
   Google Scholar
• G. Upadhya, A.J. Paul, Comprehensive Casting Analysis Model Using a Geometry-Based Technique Followed by Fully Coupled, 3-D Fluid Flow, Heat Transfer and Solidification Kinetics Calculations, AFS Transactions, Vol. 100,1992, 925–933.
   Google Scholar
• Baicheng LIU, Houfa SHEN and Wenzhen LI, Progress in Numerical Simulation of Solidification Process of Shaped Casting, J. Mater. Sci. Technol., Vol.11, 1995, 313–322.
   Web of Science ®Google Scholar
• Baicheng LIU, Wei QIU, Houfa SHEN and Zhiqiang GAO, Study and Application of Mold Filling Simulation of Shaped Castings, J. Mater. Sci. Technol., Vol. 13, 1997, 313–322.
   Web of Science ®Google Scholar
• P. Jonsson, N. Saluja, O.J. Ilegbusi, J Szekely, Fluid-Flow Phenomena in the Filling of Cylindrical Molds Using Newtonian(Turbulent) and Non-Newtonian (Power Law) Fluids, AFS Transactions, Vol. 99, 1991, 291–297.
   Google Scholar
• L. H. Kallien, M. Lipinski, Optimization Of Die Cast Parts Using Numerical Simulation Of Die Filling And Solidification, Transactions of the 17th International Die Casting Exposition and Congress, North American Die Casting Association, Cleveland, Ohio, 1993, 85–89.
   Google Scholar
• W. Qiu, L.R. Jia, S.M. Xiong and B.C. Liu, Improvement of computation efficiency of numerical simulation of mod filling of casting, Modeling of Casting, Welding and Advanced Solidification Processes VIII, San Diego, The Minerals, Metals and Materials, 1998, 117–122.
   Google Scholar
• Baicheng Liu, Wei Qiu and Houfa Shen, Study and application of mold filling simulation of shape casting, J. of MST, 1997, No. 2, 107–112
   Google Scholar
• Baicheng LIU, Jiarong LI, Wenzhen LI, Shrinkage Cavity Predication for Solidification Simulation of Steel and S.G. iron Castings, Proceedings of the Second Asian Foundry Congress (AFC-2), Japan, 1994, 381–390.
   Google Scholar
• Jiarong LI, Baicheng LIU, Huabing XIANG, Hanjing TONG and Yongtong XIE, Study of Formation and Predication of Shrinkage Cavity and Porosity of Spheroidal Graphite Iron Casting, Proceedings of the 61st Word Foundry Congress, Beijing, China, 1995, 39–50.
   Google Scholar
• J.W. Wises and J.A. Dantzig, Modeling Stress Development during the Solidification of Gray Iron Casting, Metallurgical Transactions A, 21A, No.2, 1990, 489–497.
   Google Scholar
• Y. Otsuka et al., Computer Simulation of Residual Stress in Iron Castings, Proceedings of the 60th World Foundry Congress, Netherlands, 1993, paper No. 14.
   Google Scholar
• Shoumei XIONG, Baicheng LIU, ZHU Riming, Ying GAO, Numerical Simulation and Analysis of Residual Stress in Machine Tool Bed Casting, Tsinghua Science and Technology, Vol. 1, No. 2, 1996, pp176–180.
   Google Scholar
• Y. Chen, J.W. Kang and B.C. Liu, Study on residual stress of cylinder block casting by using an integrated FDM/FEM system, Modeling of Casting, Welding and Advanced Solidification Processes VIII, San Diego, The Minerals, Metals and Materials, 1998, 771–778.
   Google Scholar
• D. Stefanescu, The second generation of computer models for solidification: heat transfer-solidification kinetics (HT-SK) codes, Numerical Simulation of Casting Solidification in Automotive Applications, Edited by Chongmin Kim and Chung-Whee Kim, The Minerals, Metals & Materials Society, 1991, 69–97.
   Google Scholar
• Wenzhen LI and Baicheng LIU, Microstructure simulation and property prediction of S.G. iron castings, Proceedings of the 62nd Word Foundry Congress, American Foundrymen Society, Inc., Des Piaines, Illinois, USA, 1996, No.6.
   Google Scholar
• Oldfield, A quantitative approach of solidification freezing of cast iron, Trans. ASM, 1966 Vol. 59, 945–955.
   Google Scholar