Selection of temper and Mg content to optimise the Quality Index of Al-7Si-Mg casting alloys

References

• J. Runyoro, S. M. A. Boutorabi and J. Campbell, “Critical gate velocities for film-forming casting alloys”, AFS Transactions, 1992, 100, 225–234.
   Google Scholar
• J. Campbell and M. Tiryakioglu, “Review of reliable processes for aluminum aerospace castings”, AFS Transactions. 1996, 104, 96–158.
   Google Scholar
• M. Drouzy, S. Jacob and M. Richard, “Interpretation of tensile results by means of quality index and probable yield strength”, AFS Int. Cast Metals Jnl., 1980, 5, 43–50.
   Web of Science ®Google Scholar
• C. H. Cáceres, “A rationale for the Quality Index of Al-Si-Mg casting alloys”. Int. J. Cast Metals Res., 1998, 10, 293–299.
   Google Scholar
• C. H. Cáceres, T. Din, A. K. M. B. Rashid and J. Campbell, “Effect of ageing on the Quality Index of an Al-Cu alloy”, Mater. Sci. Technol., 1999, 15, 711–716.
   Web of Science ®Google Scholar
• C. H. Cáceres, “Material properties and Quality Index in Al-Si-Mg casting alloys”, AFS Transactions, 1998, 106, 601–604.
   Google Scholar
• C. H. Cáceres, J. H. Sokolowski and P. Gallo, “Effect of ageing and Mg content on the Quality Index of two Al-l%Cu-4.5%Si-Mg alloys”, Mater. Sci. Engng. A, 1999, 271, 53–61.
   Web of Science ®Google Scholar
• C. H. Cáceres, “A phenomenological approach to the Quality Index”, Int. J. Cast Metals Res., 2000, pp. 367–375.
   Google Scholar
• J. Barresi, M. J. Kerr, H. Wang and M. J. Couper, “Effect of magnesium, iron and cooling rate on the mechanical properties of Al-Si-Mg foundry alloys”, AFS Transactions, 2000, in press.
   Google Scholar
• C. H. Cáceres, C. J. Davidson, J. R. Griffiths, L. M. Hogan and Q. G. Wang, “Hypoeutectic Al-Si-Mg foundry alloys”. Materials Forum, 1997, 21, 27–43.
   Google Scholar
• C. H. Cáceres, C. J. Davidson, J. R. Griffiths and Q. G. Wang, “The effect of Mg on the microstructure and mechanical behaviour of Al-Si-Mg casting alloys”, Metall. Mater. Trans., 1999, 30A, 2611–2618.
   Web of Science ®Google Scholar
• C. J. Simensen and T. L. Rolfsen, “Production of π-AlMgSiFe crystals”, Z Metallkde., 1997, 88, 142–146.
   Google Scholar
• B. Closset and J. E. Gruzleski, “Structure and properties of hypoeutectic Al-Si-Mg alloys modified with pure strontium”, Metall. Trans., 1982, 13A, 945–951.
   Web of Science ®Google Scholar
• G. E. Nagel, J. P. Mouret and J. Dubruelh, “A 357 type alloy with improved properties”, AFS Transactions, 1983, 91, 157–160.
   Google Scholar
• D. A. Granger, R. R. Sawtell and M. M. Kersker, “Effect of Beryllium on the properties of A357.0 castings”, AFS Transactions, 1984, 92, 579–586.
   Google Scholar
• R. Sinfield and D. A. Harris, “Effects of magnesium and iron contents and of heat treatment variables on the mechanical properties of sodium-modified 7%Si- 0.35% Mg alloy”, J. Aust. Inst. Met., 1975, 20, 44–48.
   Web of Science ®Google Scholar
• J. A. Taylor, D. H. StJohn, J. Barresi, M. J. Couper, “Influence of Mg content on the microstructure and solid solution chemistry of Al-7%Si-Mg casting alloys during solution treatment”, Materials Science Forum, Vols. 331–337, pp. 277–282, 2000.
   Google Scholar
• K. T. Kashyap, S. Murali, K. S. Raman and K. S. S. Murthy, “Casting and heat treatment variables of Al-7Si-Mg alloy”, Mater. Sci. Technol., 1993, 9, 189–203.
   Web of Science ®Google Scholar
• S. Murali, K. S. Raman and K. S. S. Murthy, “Effect of magnesium, iron (impurity) and solidification rates on the fracture toughness of Al-7Si-0.3Mg casting alloy”, Mater. Sci. Engng. A, 1992, A151, 1–10.
   Web of Science ®Google Scholar
• C. Verdu, H. Cercueil, S. Communal, P. Sainfort and R. Fougeres, “Microstructural aspects of the damage mechanisms of cast Al-7Si-Mg alloys”, Mater. Sci. Forum, 1996, 217–222, 1449–1454.
   Google Scholar
• Q. G. Wang, C. H. Cáceres and J. R. Griffiths, “The cracking of Fe-rich and eutectic Si particles in an A1-7Si-0.7Mg casting alloy”, AFS Transactions, 1998, 106, 131–136.
   Google Scholar
• C. H. Cáceres, C. J. Davidson and J. R. Griffiths, “The deformation and fracture behaviour of an Al-Si-Mg casting alloy”. Mater. Sci. Engng. A, 1995, A197, 171–179.
   Web of Science ®Google Scholar
• Q. G. Wang and C. H. Cáceres, “Mg effects on the eutectic structure and tensile properties of Al-Si-Mg alloys”, Mater. Sci. Forum, 1996. 242, 159–164.
   Google Scholar
• Q. G. Wang and C. H. Cáceres, “The fracture mode in Al-Si-Mg casting alloys”, Mater. Sci. Engng. A, 1998, A241, 72–82.
   Web of Science ®Google Scholar
• G. K. Sigworth and C. H. Cáceres, “Porosity formation in aluminium alloy castings under quasi-directional solidification”, Int. J. Cast Metals Res., 1997, 9, 331–336.
   Google Scholar