http://orcid.org/0000-0003-0691-1801
References
- Abu-Dheir N, Khraisheh M, Saito K, et al. Silicon morphology modification in the eutectic Al–Si alloy using mechanical mold vibration. Mater Sci Eng: A. 2005;393(1):109–117.
- Kocatepe K. Effect of low frequency vibration on porosity of LM25 and LM6 alloys. Mater Des. 2007;28(6):1767–1775.10.1016/j.matdes.2006.05.004
- Jian X, Xu H, Meek TT, et al. Effect of power ultrasound on solidification of aluminum A356 alloy. Mater Lett. 2005;59(2):190–193.10.1016/j.matlet.2004.09.027
- Knuutinen A, et al. Modification of Al–Si alloys with Ba, Ca, Y and Yb. J Light Met. 2001;1(4):229–240.10.1016/S1471-5317(02)00004-4
- Rincón E, López HF, Cisneros MM, et al. Effect of temperature on the tensile properties of an as-cast aluminum alloy A319. Mater Sci Eng: A. 2007;452:682–687.10.1016/j.msea.2006.11.029
- Vaško A. Analysis of the factors influencing microstructure and mechanical properties of austempered ductile iron. Communications. 2009;11(4):43–47.
- Belan J. Structural analyses of advanced materials for aerospace industry. Mater Sci (Medžiagotyra). 2008;14(3):315–318.
- Khalifa W, Tsunekawa Y, Okumiya M. Effect of ultrasonic melt treatment on microstructure of A356 aluminium cast alloys. Int J Cast Met Res. 2008;21(1–4):129–134.10.1179/136404608X361819
- Salleh MS, Omar MZ, Syarif J. The effects of Mg addition on the microstructure and mechanical properties of thixoformed Al–5%Si–Cu alloys. J Alloy Compd. 2015;621:121–130.10.1016/j.jallcom.2014.09.152
- Gopikrishna S, Binu CY. Study on effects of T6 heat treatment on grain refined A319 alloy with magnesium and strontium addition. Int J Theor Appl Res Mech Eng. 2013;2(3):59–62.
- Dieter G. Mechanical metallurgy. 2nd ed. London: McGraw-Hill International; 1981. p. 211–219.
- Lasa L, Rodriguez-Ibabe JM. Evolution of the main intermetallic phases in Al–Si–Cu–Mg casting alloys during solution treatment. J Mater Sci. 2004;39(4):1343–1355.10.1023/B:JMSC.0000013895.72084.c9
- Kumar R, Ansari MS, Mishra SS, et al. Effect of mould vibration on microstructure and mechanical properties of casting during solidification. Int J Eng. 2014;3(4):90–92.
- Nguyen H. The effects of solidification rates on porosity formation and cast microstructure of aluminum alloy. 2005;A356:1–6.
- Aritaka E, Esaka H, Shinozuka K. Mechanism for complex morphology due to mechanical vibration. ISIJ Int. 2016;56(8):1413–1419.10.2355/isijinternational.ISIJINT-2016-122
- Omura N, Murakami Y, Li M, et al. Effects of mechanical vibration on cooling rate and DAS of AC4C aluminum alloy gravity die castings. Mater Trans. 2009;50(11):2604–2608.10.2320/matertrans.M2009247