References
- Keough JR. The development, processing and applications of ADI. AFS Proceeding of the 3rd World Conference on ADI. Vol. II; 1991, p. 638–658.
- Moncada OJ, Sikora JA. Influence of nodule count on residual stresses and distortion in thin wall ductile iron plates of different matrices. AFS Trans. 1996;96–147:577–580.
- Echeverría MD, Moncada OJ, Sikora JA. Influence of the dimensional change, and its dispersion, on the fabrication size tolerances of ADI parts: Comparison with SAE 4140 steel. ISIJ Int. 2001;41:25–30.10.2355/isijinternational.41.25
- Sosa AD, Echeverría MD, Moncada OJ. Machining and heat treatment effects on distortion and residual stresses in an industrial application of ADI. ISIJ Int. 2004;44:1195–1200.10.2355/isijinternational.44.1195
- Apraiz J. Tratamiento térmico de los aceros. Madrid: Editorial Dossat; 1964.
- Dieter GE. Metalurgia Mecánica. New York: Mc. Graw-Hill, Book Company; 1967.
- Dai Pra AL, Echeverria MD, Scandurra A, et al. Dimensional change prediction in austempered ductile iron parts using fuzzy modeling. Lat Am Appl Res. 2005;35:197–204.
- Aranzabal J, Serramoglia G, Rousiere D. Development of a new mixed (ferritic–ausferritic) ductile iron for automotive suspension parts. Int J Cast Met Res. 2002;16:185–190.
- Wade N, Ueda Y. Mechanical properties of ductile cast iron with duplex matrix. ISIJ Trans. 1981;21:117–126.
- Verdu C, Adrien J, Reynaud A. Contributions of dual phase heat treatments to fatigue properties of SG cast irons. Int J Cast Met Res. 2005;18:346–354.10.1179/136404605225023189
- Basso A, Martinez R, Sikora J. Influence of austenitising and austempering temperatures on microstructure and properties of dual phase ADI. Mat Sci Technol. 2007;23:1321–1326.10.1179/174328407X236544
- Basso A, Martinez R, Sikora J. Influence of part size on Dual-Phase ADI microstructure and properties: comparison with fully ferritic and fully ausferritic matrices. Mat Sci Technol. 2009;25:1271–1278.10.1179/174328408X365784
- Kilicli V, Erdogan M. Tensile properties of partially austenitised and austempered ductile irons with dual matrix structures. Mat Sci Technol. 2006;22:919–928.
- Sahin Y, Erdogan M, Kilicli V. Wear behavior of austempered ductile irons with dual matrix structures. Mat Sci Eng. A. 2007;444:31–38.10.1016/j.msea.2006.06.071
- Basso A, Caldera M, Chapetti M, et al. Mechanical properties of dual phase austempered ductile iron. ISIJ Int. 2010;50:302–306.10.2355/isijinternational.50.302
- ASM Metals Handbook. Vol. 15, Casting. 9th ed. Metals Park, OH; 1988, p. 629.
- Basso A, Caldera M, Rivera G, et al. High silicon ductile iron: possible uses in the production of parts with ‘Dual Phase ADI’ microstructure. ISIJ Int. 2012;52:1140–1145.
- Basso A, Caldera M, Massone J. Development of high silicon Dual Phase ADI. ISIJ Int. 2015;55:1106–1113.10.2355/isijinternational.55.1106
- Dai Pra AL. A study about dimensional change of industrial parts using fuzzy rules. Fuzzy Sets Syst. 2003;139:227–237.10.1016/S0165-0114(02)00478-5
- Bhadeshia H. Bainite in steels. Transformations, microstructure and properties. 2nd ed. Cambridge; 2001. Chapter 2.2, Dislocation Density; p. 26–29.
- Boccardo AD, Sosa AD, Echeverría MD, et al. Numerical simulation of dimensional change during austempering heat treatment in ductile cast iron. 10th International Symposium on the Science and Processing of Cast Iron–SPCI10; 2014. eBook ISBN 978-987-45833-0-7, URI http://rinfi.fi.mdp.edu.ar/xmlui/handle/123456789/62.