References
- Basso A, Martinez R, Sikora J. Development of Dual Phase ADI. Proc. Eighth International Symposium on Science and Processing of Cast Iron; Beijing, China: Tsinghua University; 2006. p. 408–413.
- Basso A, Martinez R, Sikora J. Influence of austenitising and austempering temperatures on microstructure and properties of dual phase ADI. Mater Sci Technol. 2007;23/11:1321–1326.
- Kilicli V, Erdogan M. Tensile properties of partially austenitised and austempered ductile irons with dual matrix structures. Mater Sci Technol. 2006;22/8:919–928.
- Kilicli V, Erdogan M. Effect of ausferrite volume fraction and morphology on tensile properties of partially austenitised and austempered ductile irons with dual matrix structures. Int J Cast Met. 2007;20/4:202–214.
- Aranzabal J, Serramoglia G, Rousiere D. Development of a new mixed (ferritic – ausferritic) ductile iron for automotive suspension parts. Int J Cast Met Res. 2002;16:185–190.
- Verdu C, Adrien J, Reynaud A. Contributions of dual phase heat treatments to fatigue properties of SG cast irons. Int J Cast Met Res. 2005;18:346–354.
- Basso A, Martinez R, Sikora J. Influence of part size on dual-phase ADI microstructure and properties: comparison with fully ferritic and fully ausferritic matrices. Mater Sci Technol. 2009;25:1271–1278.
- Basso A, Sikora J. Review on production processes and mechanical properties of Dual Phase austempered ductile irons. Int J Metalcast. 2011;6:7–14.
- Basso A, Caldera M, Chapetti M, et al. Mechanical caracterizations of Dual Phase austempered ductile irons. ISIJ Intern. 2010;50:302–306.
- Basso A, Caldera M, Rivera G, et al. High silicon ductile iron: possible uses in the production of parts with “Dual Phase ADI”. ISIJ Intern. 2012;52:1130–1134.
- Basso A, Martinez R, Sikora J. Influence of chemical compositions and holding time on austenite-ferrite transformation in ductile irons within the intercritical interval. J Alloys Compd. 2011;509:9884–9889.
- Basso A, Caldera M, Massone J. Development of high silicon Dual Phase ADI. ISIJ Int. 2015;55:1106–1113.
- Basso AD, Dai Pra AL, Echeverria MD, et al. Study of dimensional change of high-silicon ductile iron with ADI and Dual-Phase-ADI microstructures starting from different as-cast structures. Int J Cast Met Res. 2018;31(3):144–152.
- ASM metals handbook. Volume 15: “Casting”. Ninth ed. ASM International - USA; 1988. p. 629.
- Ductile Iron data for design engineers: Section 7 Heat Treatment [Internet]. Strongville (OH): Ductile Iron Society; 2013 [cited 2019 Ago 21]. Available from: http://www.ductile.org/didata/Section7/7intro.htm
- Ductile Iron data for design engineers: Section 4 Austempered Ductile Iron [Internet]. Strongville (OH): Ductile Iron Society; 2013 [cited 2019 Ago 21]. Available from: http://www.ductile.org/didata/Section4/4intro.htm#Introduction
- Song L, Guo E, Wang L, et al. Effects of silicon on mechanical properties and fracture toughness of heavy-section ductile cast iron. Metals. 2015;5:150–161.
- Kiguchi S, Magata A. Effect of C and Si on mechanical properties of austempered ductile iron. Int J Cast Met Res. 2001;14:53–58.