Microstructure and mechanical properties of die-casting ADC12+x(La+Yb) alloy

References

• Xu C, Xiao WL, Hanada S, et al. The effect of scandium addition on microstructure and mechanical properties of Al–Si–Mg alloy: A multi-refinement modifier. Mater Charact. 2015;110:160.
   Web of Science ®Google Scholar
• Gorny A, Manickaraj J, Cai ZH, et al. Evolution of Fe based intermetallic phases in Al-Si hypoeutectic casting alloys: influence of the Si and Fe concentrations, and solidification rate. J Alloys Compd. 2013;577:103.
   Web of Science ®Google Scholar
• Shabestari SG. The effect of iron and manganese on the formation of intermetallic compounds in aluminum-silicon alloys. Mater Sci Eng A. 2004;383:289.
   Web of Science ®Google Scholar
• Kasprzak W, Kurita H, Birsan G, et al. Hardness control of Al-Si HPDC casting alloy via microstructure refinement and tempering parameters. Mater Des. 2016;103:365.
   Web of Science ®Google Scholar
• Otarawannaa S, Gourlay CM, Laukli HI, et al. Formation of the surface layer in hypoeutectic Al-alloy high-pressure die castings. Mater Chem Phys. 2011;130:251.
   Web of Science ®Google Scholar
• Yang LJ. The effect of solidification time in squeeze casting of aluminium and zinc alloys. J Mater Process Technol. 2007;192–193(5):114.
   Google Scholar
• Chattopadhyay H. Simulation of transport processes in squeeze casting. J Mater Process Technol. 2007;186(1–3):174.
   Web of Science ®Google Scholar
• Han ZQ, Huang XR, Luo AA, et al. A quantitative model for describing crystal nucleation in pressurized solidification during squeeze casting. Scr Mater. 2012;66(5):215.
   Web of Science ®Google Scholar
• Dai W, Wu S, Lü S, et al. Effects of rheo-squeeze casting parameters on microstructure and mechanical properties of AlCuMnTi alloy. Mater Sci Eng A. 2012;538:320.
   Web of Science ®Google Scholar
• Okayasu M, Ota K, Takeuchi S, et al. Influence of microstructural characteristics on mechanical properties of ADC12 aluminum alloy. Mater Sci Eng A. 2014;592(3):189.
   Google Scholar
• Song XC, Yan H, Zhang XJ. Microstructure and mechanical properties of Al-7Si-0.7Mg alloy formed with addition of (Pr+Ce). J Rare Earth. 2017;4:412.
   Google Scholar
• Prukkanona W, Srisukhumbowornchai N, Limmaneevichitr C. Influence of Sc modification on the fluidity of an A356 aluminum alloy. J Alloys Compd. 2009;487:453.
   Web of Science ®Google Scholar
• Song XC, Yan H, Chen FH. Impact of rare earth element la on microstructure and hot crack resistance of ADC12 alloy. J Wuhan Univ Technol Mater Sci. 2018;2:193.
   Google Scholar
• Yan H, Song XC, Huang X. Preparation of Al–La master alloy by ultrasonic method and modification on Al alloy. Rare Met. 2015;7:457.
   Google Scholar
• Huang X, Yan H. Effect of trace la addition on the microstructure and mechanical property of As-cast ADC12 Al-alloy. J Wuhan Univ Technol Mater Sci. 2013;28(1):202.
   Web of Science ®Google Scholar
• Xiao DH, Huang BY. Effect of Yb addition on precipitation and microstructure of Al-Cu-Mg-Ag alloys. Trans Nonferrous Met Soc. 2007;17(6):1181.
   Web of Science ®Google Scholar
• Fang HC, Chen KH, Zhao Z, et al. Effect of Yb additions on microstructures and properties of 7A60 aluminum alloy. Trans Nonferrous Met Soc. 2008;18(1):28.
   Web of Science ®Google Scholar
• Tang CL, Zhou DJ. Precipitation hardening behavior of dilute binary Al−Yb alloy. Trans Nonferrous Met Soc. 2014;24(7):2326.
   Web of Science ®Google Scholar
• Zhang Y, Gao KY, Wen SP, et al. Determination of Er and Yb solvuses and trialuminide nucleation in Al–Er and Al–Yb alloys. J Alloys Compd. 2014;590:526.
   Web of Science ®Google Scholar
• Li JH, Suetsugu S, Tsunekawa Y, et al. Refinement of eutectic Si phase in Al-5Si alloys with Yb additions. Metall Mater Trans A. 2013;44(2):669.
   Google Scholar
• Li B, Wang HW, Jie JC, et al. Microstructure evolution and modification mechanism of the ytterbium modifiedAl-7.5%Si-0.45%Mg alloys. J Alloys Compd. 2011;509(7):3387.
   Web of Science ®Google Scholar
• Qiu CR, Miao SN, Li XR, et al. Synergistic effect of Sr and La on the microstructure and mechanical properties of A356.2 alloy. Mater Des. 2017;114(1):563.
   Google Scholar
• Okamoto H. Al-La (Aluminum - Lanthanum). J Phase Equilib. 2000;21:205.
   Google Scholar
• Gschneidner KA, Calderwood FW. The Al-Yb (aluminum - ytterbium). Bull Alloy Phase Diagr. 1989;10:47.
   Google Scholar
• Djurdjevic M, Jiang H, Sokolowski J. On-line prediction of aluminum–silicon eutectic modification level using thermal analysis. Mater Charact. 2001;46(1):31.
   Web of Science ®Google Scholar
• Yang HL, Ji SX, Yang WC, et al. Effect of Mg level on the microstructure and mechanical properties of die-cast Al–Si–Cu alloys. Mater Sci Eng A. 2015;642(5):340.
   Google Scholar
• Pourbahari B, Emamy M. Effects of La intermetallics on the structure and tensile properties of thin section gravity die-cast A357 Al alloy. Mater Des. 2016;94:111.
   Web of Science ®Google Scholar
• Zhang J, Liu S, Zhe L, et al. Structure stability and mechanical properties of high-pressure die-cast Mg–Al–La–Y-based alloy. Trans Nonferrous Met Soc. 2012;531(2):70.
   Google Scholar
• Anil S, Edwin R, Fuller J. Analysis of stresses in aluminum-silicon alloys. Comput Mater Sci. 2001;21(1):149.
   Web of Science ®Google Scholar
• Hall EO. The deformation and ageing of mild steel: III discussion of results. Proc Phys Soc Sect B. 1951;64(9):747.
   Google Scholar
• Petch NJ. The cleavage strength of polycrystals. J Iron Steel Inst. 1953;174:25.
   Web of Science ®Google Scholar