Surface modification of ductile iron produced by an innovative in-situ casting technique

References

• Labrecque C, Gagné M. Review ductile iron: fifty years of continuous development. Can Metall Q. 1998;37:343–378.
   Web of Science ®Google Scholar
• Tabrett CP, Sare IR, Ghomashchi MR. Microstructure-property relationships in high chromium white iron alloys. Int Mater Rev. 1996;41:59–82.
   Web of Science ®Google Scholar
• Tang XH, Chung R, Pang CJ, et al. Microstructure of high (45 wt.%) chromium cast irons and their resistances to wear and corrosion. Wear. 2011;271:1426–1431.
   Web of Science ®Google Scholar
• Guo LJ, Wang XB, Wang FH, et al. Modification of TiB2/Fe coating by SMAW with high carbon ferrochrome. Surf Eng. 2013;29:642–646.
   Web of Science ®Google Scholar
• Sun SD, Fabijanic D, Ghaderi A, et al. Microstructure and hardness characterisation of laser coatings produced with a mixture of AISI 420 stainless steel and Fe-C-Cr-Nb-B-Mo steel alloy powders. Surf Coat Technol. 2016;296:76–87.
   Web of Science ®Google Scholar
• Celis MM, Valle N, Lacaze J, et al. Microstructure of as cast reinforced ductile iron. Int J Cast Met Res. 2011;24:76–82.
   Web of Science ®Google Scholar
• Valle N, Celis MM, Lacaze J, et al. A SIMS and TEM investigation of the microstructure of wear-resistant ductile cast iron. Surf Interface Anal. 2013;45:441–444.
   Web of Science ®Google Scholar
• Žic S, Džambas I, Ikonić M. Possibilities of implementing bimetallic hammer castings in crushing industries. Metalurgija. 2009;48:51–54.
   Web of Science ®Google Scholar
• Özdemir Z. Effect of heat treatment on the impact toughness of high-chromium cast iron-low alloy steel bimetal components. Mater Sci Heat Treat. 2017;58: 471738.
   Web of Science ®Google Scholar
• Zhao N, Xu Y, Zhong L, et al. Fabrication, microstructure and abrasive wear characteristics of anin situ tantalum carbide ceramic gradient composite. Ceram Int. 2015;41:12950–12957.
   Web of Science ®Google Scholar
• Ye F, Hojamberdiev M, Xu Y, et al. Microstructure, microhardness and wear resistance of VCp/Fe surface composites fabricated in situ. Appl Surf Sci. 2013;280:297–303.
   Web of Science ®Google Scholar
• Zhong L, Zhang X, Wang X, et al. Growth kinetics of WC-Fe layer formed at the surface iron during solid-phase diffusion. Ceram Int. 2016;42:16941–16947.
   Web of Science ®Google Scholar
• Cai X, Xu Y. Microstructure, friction and wear of NbC coatings on a Fe substrate fabricated via an in situ reaction. Surf Coat Technol. 2017;322:202–210.
   Web of Science ®Google Scholar
• Zhao N, Xu Y, Fu Y. Mechanical properties of one-step in situ synthesized NbC-Fe composite coating. Surf Coat Technol. 2017;309:1105–1110.
   Web of Science ®Google Scholar
• Fischer SF, Muschna S, Bührig-Polaczek A, et al. In-situ surface hardening of cast iron by surface layer metallurgy. Mater Sci Eng A. 2014;615:61–69.
   Web of Science ®Google Scholar
• Bounita M, Boutarek-Zaourar N, Mansour S, et al. Surface hardening of gray cast-iron induced by surface treatment in the mold. Met Alloy. 2018;105:1–8.
   Google Scholar
• Bounita M, Boutarek-Zaourar N, Mansour S, et al. of coupled Al/gray cast iron obtained by molding and its effect on mass loss. China Foundry. 2018;15:378–383.
   Web of Science ®Google Scholar
• Carvalho MC, Wang Y, Souza JAS, et al. Characterization of phases and defects in chromium carbide overlays deposited by SAW process. Eng Fail Anal. 2016;60:374–382.
   Web of Science ®Google Scholar
• Fan QX, Wang TG, Liu YM, et al. Microstructure and corrosion resistance of the AlTiN coating deposited by arc ion plating. Acta Metall Sin (Engl Lett). 2016;29:1119–1126.
   Web of Science ®Google Scholar
• Zeng RC, Li XT, Liu ZG, et al. Corrosion resistance of Zn-Al layered double hydroxide/poly(lactic acid) composite coating on magnesium alloy AZ31. Front Mater Sci. 2015;9:355–365.
   Web of Science ®Google Scholar
• El-Aziz KA, Zohdy K, Saber D, et al. Wear and corrosion behavior of high-Cr white cast iron alloys in different corrosive media. J Bio TriboCorros. 2015;1–25:1–12.
   Google Scholar
• Wiengmoon A, Pearce JTH, Chairuangsri T. Relationship between microstructure, hardness and corrosion resistance in 20 wt.%Cr, 27 wt.%Cr and 36 wt.%Cr high chromium cast irons. Mater Chem Phys. 2011;125:739–748.
   Web of Science ®Google Scholar
• Zumelzu E, Goyos I, Cabezas C, et al. Wear and corrosion behaviour of high-chromium (14–30% Cr) cast iron alloys. J Mater Proces Tech. 2002;128:250–255.
   Web of Science ®Google Scholar