References
- Apelian D, Paliwal M, Herrschaft DC. Casting with zinc alloys. JOM. 1981;33(11):12–20.
- Handbook ASM. Volume 15 casting. Ohio: ASM International; 2008.
- Handbook ASM. Volume 2 properties and selection: nonferrous alloys and special-purpose masterials. Ohio: ASM International; 1992.
- Divandari M, Mehrabian M. A comparative study on characteristics of dynamic oxide film of molten Zn-Al alloys. Iran J Mater Sci Eng. 2017;14(3):34–47.
- Campbell J. Complete casting handbook. 2nd. ed. London: Butterworth-Heinemann; 2015.
- Campbell J. The mechanisms of metallurgical failure.the origin of fracture. Oxford, UK: Butterworth-Heinemann; 2020.
- Ghanaatian MH, Raiszadeh R. Effect of vibration on behaviour of bifilms in A356 and A357 melts. Mater Sci Technol. 2016;33(1):2–8.
- Chegini S, Raiszadeh R. Effect of dissolved hydrogen on removal of double oxide film defects from Al melt. Int J Cast Met Res. 2014;27(6):349–356.
- Raiszadeh R, Griffiths WD. A method to study the history of a double oxide film defect in liquid aluminum alloys. Metall Mater. 2006;37(6):865–871.
- Shafaei A, Raiszadeh R. Reduced pressure test verification of healing of double oxide film defects in Al-Mg alloys. Metall Mater. 2014;45(6):2486–2494.
- Aryafar M, Raiszadeh R, Shalbafzadeh A. Healing of double oxide film defects in A356 aluminium melt. J Mater Sci. 2010;45(11):3041–3051.
- Khaleghifar F, Raiszadeh R, Doostmohammadi H. Effect of Ca on the behavior of double oxide film defects in commercially pure aluminum melt. Metall Mater Trans B. 2015;46(2):1044–1051.
- Bartar Esfahani H, Raiszadeh R, Doostmohammadi H. The effect of strontium on the strength of layers of double oxide film defects. Metall Mater. 2016;47(3):1331–1338.
- Nyahumwa C, Green NR, Campbell J. Influence of casting technique and hot isostatic pressing on the fatigue of an Al-7Si-Mg alloy. Metall Mater. 2001;32(2):349–358.
- Bartar Esfahani H, Doostmohammadi H, Raiszadeh R. Decrease in the rate of diffusion of hydrogen through layers of bifilm defects in Al melt in the presence of Sr. Int J Cast Met Res. 2016;29(3):179–185.
- Amirinejhad S, Raiszadeh R, Doostmohammadi H. Calorimetric study of the oxidation of Al–Mg alloys for the prediction of healing of the double oxide film defect. J Therm Anal Calorim. 2013;113(2):769–777.
- Divandari M, Campbell J. Bubble Damage in a Zn-Al Alloy Pressure Die Casting. AFS Trans. 2003;020:107–114.
- Bale CW, Bélisle E, Chartrand P, et al. FactSage thermochemical software and databases — recent developments. CALPHAD: Comput Coupling Phase Diagrams Thermochem. 2009;33(2):295–311.
- Gale WF, Totemeier TC. Smithells metals reference book. Oxford: Elsevier Butterworth-Heinemann; 2003.
- Dispinar D, Campbell J. Effect of casting conditions on aluminium metal quality. J Mater Process Technol. 2007;182(1–3):405–410.
- Ahmadpour A, Raiszadeh R, Doostmohammadi H. Effect of stirring on behaviour of double oxide film defects in A356 aluminium melt. Int J Cast Met Res. 2014;27(4):221–229.
- Jang K, Yoon L, Jeon P, et al. Effects of Mg content on hydrogen content and melt quality of Al-Mg Alloys. Metals. 2019;9(11):1235.
- Nyahumwa C, Green NR, Campbell J. The concept of the fatigue potential of cast alloys. AFS Trans. 1998;58:215–223.
- Bagherpour-Torghabeh H, Raiszadeh R, Doostmohammadi H. Role of mechanical stirring of Al-Mg melt in the healing of bifilm defect. Metal Matter Trans B. 2017;48(6):3174–3184.