References
- Zaremba L. FDA Guidance for MR System Safety and Patient Exposures: Current Status and Future Considerations. Magnetic resonance procedures: health effects and safety, F. G Shellock. CRC Press, Boca Raton, FL 2001; 183–96
- Nitz W., et al. On the Heating of Linear Conductive Structures as Guide Wires and Catheters in Interventional MRI. J. Magnetic Resonance Imaging 2001; 13: 105–14
- Rezai A., et al. Neurostimulation Systems for Deep Brain Stimulation: In Vitro Evaluation of Magnetic Resonance Imaging‐Related Heating at 1.5 Tesla. J. Magnetic Resonance Imaging 2002; 15: 241–50
- Yeung C., et al. Using a Safety Index. Magnetic Resonance in Medicine 2002; 47: 187–93, RF Safety of Wires in Interventional MRI
- ASTM F2182–02a – “Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging”, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428–2959 USA
- UNESCO, United Nations International Oceanographic Commission, “A Sea Water Equation of State Calculator”, http://ioc.unesco.org/oceanteacher/resourcekit/M3/Converters/SeaWaterEquationOfState
- Yeung C., et al. RF Heating Due to Conductive Wires During MRI Depends on the Phase Distribution of the Transmit Field. Magnetic Resonance in Medicine 2002; 47: 187–93
- Calcagnini, et al, “Effect of Lead Geometry and Placement on MRI Induced Heating of Pacemaker Leads”, Private communication, to be submitted to an appropriate journal
- Gabriel S., Lau R. W., Gabriel C. The dielectric properties of biological tissues: III. Parametric models for the frequency spectrum of tissues. Phys. Med. Biol 1996; 41: 2271–93
- AAMI, “Active Implantable Medical Devices‐Electromagnetic Compatibility – EMC Test Protocols For Implantable Cardiac Pacemakers And Implantable Cardioverter Defibrillators”, ANSI/AAMI PC69:2000, AAMI Association for the Advancement of Medical Instrumentation, 1110 North Glebe Road, Suite 220, Arlington, VA 22201‐4795 USA
- NEMA Standard MS 8‐1993, “Characterization of the SAR for MRI System”, 1993, National Electrical Manufacturers Association, National Electrical Manufacturers Association, 1300 North 17th Street, Suite 1752, Rosslyn, Virginia 22209 USA
- IEC Standard 60601‐2‐33, “Particular requirements for the safety of magnetic resonance equipment for medical diagnosis”, International Electrotechnical Commission, Jan. 2004
- Ho H. Safety of Metallic Implants in Magnetic Resonance Imaging Journal of Magnetic Resonance Imaging. 2001; 14: 472–7