References
- Schulte PA, Geraci CL, Murashov V, et al. Occupational safety and health criteria for responsible development of nanotechnology. J Nanopart Res. 2014;16(1):2153. DOI:10.1007/s11051-013-2153-9
- Mat NSC, Ismail H, Othman N. Curing characteristics and mechanical and aging properties of ethylene propylene diene monomer/calcium carbonate/bentonite hybrid composites. J Elastomers Plast. 2016:95244316663812.
- Meng X, Zhang Y, Zhou F, et al. Influence of carbon ash on the rheological properties of bentonite dispersions. Appl Clay Sci. 2014;88:129–133.10.1016/j.clay.2013.12.001
- Albano C, Hernández M, Ichazo MN, et al. Characterization of NBR/bentonite composites: vulcanization kinetics and rheometric and mechanical properties. Polym Bull. 2011;67(4):653–667.10.1007/s00289-010-0432-5
- Salkhord S, Sadeghi Ghari H. Synergistic reinforcement of NBR by hybrid filler system including organoclay and nano-CaCO3. J Appl Polym Sci. 2015;132(44):1–14.
- Hayeemasae N, Ismail H, Azura AR. Blending of natural rubber/recycled ethylene-propylene-diene monomer: cure behaviors and mechanical properties. Polym Plast Technol Eng. 2013;52(5):501–509.10.1080/03602559.2012.762020
- Kim J, Oh T, Lee D. Curing and barrier properties of NBR/organo-clay nanocomposite. Polym Int. 2004;53(4):406–411.10.1002/(ISSN)1097-0126
- Ismail H, Mathialagan M. Curing characteristics, morphological, tensile and thermal properties of bentonite-filled ethylene-propylene-diene monomer (EPDM) composites. Polym Plast Technol Eng. 2011;50(14):1421–1428.10.1080/03602559.2011.584244