Solvated polystyrene resin: a perspective on sustainable alternative to epoxy resin in composite development

References

• Ighalo JO, Adeyanju CA, Ogunniyi S, et al. An empirical review of the recent advances in treatment of natural fibers for reinforced plastic composites. Compos Interfaces. 2021;28(9):925–960.
   Web of Science ®Google Scholar
• Adeniyi AG, Ighalo JO, Abdulkareem SA. Al, Fe and Cu waste metallic particles in conductive polystyrene composites. Int J Sustainable Eng. 2021;14(4):893–898.
   Web of Science ®Google Scholar
• Abdulkareem S, Amosa M, Adeniyi A, et al. Effect of metallic fillers on the hardness of polystyrene composites: an experimental investigation. in IOP Conference Series: Materials Science and Engineering, Covenant University, Canaan Land, Ota, Nigeria. 2019. IOP Publishing.
   Google Scholar
• Sutradhar B, Mesbah M, Hasan M. Effect of fiber ratio and chemical treatment on properties of banana and betel nut fiber reinforced hybrid polypropylene composites. in IOP Conference Series: Materials Science and Engineering, Dhaka, Bangladesh. 2018. IOP Publishing.
   Google Scholar
• Onyekachi OE, Iwuozor KO. Mechanical and water absorption properties of polymeric compounds. Am J Mech Mater Eng. 2019;3(2):11.
   Google Scholar
• Ellyin F, Maser R. Environmental effects on the mechanical properties of glass-fiber epoxy composite tubular specimens. Compos Sci Technol. 2004;64(12):1863–1874.
   Web of Science ®Google Scholar
• Adeyanju CA, Ogunniyi S, Ighalo JO, et al. A review on luffa fibres and their polymer composites. J Mater Sci. 2021;56(4):2797–2813.
   Web of Science ®Google Scholar
• Mir A, Zitoune R, Collombet F, et al. Study of mechanical and thermomechanical properties of jute/epoxy composite laminate. J Reinf Plast Compos. 2010;29(11):1669–1680.
   Web of Science ®Google Scholar
• Garg P, Singh BP, Kumar G, et al. Effect of dispersion conditions on the mechanical properties of multi-walled carbon nanotubes based epoxy resin composites. J Polym Res. 2011;18(6):1397–1407.
   Web of Science ®Google Scholar
• Wei J, Saharudin MS, Vo T, et al. N, N-Dimethylformamide (DMF) usage in epoxy/graphene nanocomposites: problems associated with reaggregation. Polymers. 2017;9(6):193.
   PubMed Web of Science ®Google Scholar
• Zhou Y, Pervin F, Jeelani S, et al. Improvement in mechanical properties of carbon fabric–epoxy composite using carbon nanofibers. J Mater Process Technol. 2008;198(1–3):445–453.
   Web of Science ®Google Scholar
• Tang J, Zhou H, Liang Y, et al. Properties of graphene oxide/epoxy resin composites. J Nanomater. 2014;2014. DOI:10.1155/2014/696859
   Google Scholar
• Bhoopathi R, Ramesh M, Rajaprasanna R, et al. Physical properties of glass-hemp-banana hybrid fiber reinforced polymer composites. Indian J Sci Technol. 2017;10(7):1–7.
   Google Scholar
• Shivamurthy B, Thimmappa B, Monteiro J. Sliding wear, mechanical, flammability, and water intake properties of banana short fiber/Al (OH) 3/epoxy composites. J Nat Fibers. 2020;17(3):337–345.
   Web of Science ®Google Scholar
• Adeniyi AG, Ighalo JO. A systematic review of pure metals reinforced plastic composites. Iran Polym J. 2021;30(7):751–768.
   Web of Science ®Google Scholar
• Sprenger S. Epoxy resin composites with surface‐modified silicon dioxide nanoparticles: a review. J Appl Polym Sci. 2013;130(3):1421–1428.
   Web of Science ®Google Scholar
• Bourne L, Milner F, Alberman K. Health problems of epoxy resins and amine-curing agents. Occup Environ Med. 1959;16(2):81–97.
   Google Scholar
• Van Putten P, Coenraads P, Nater J. Hand dermatoses and contact allergic reactions in construction workers exposed to epoxy resins. Contact Dermatitis. 1984;10(3):146–150.
   PubMed Web of Science ®Google Scholar
• Davis DC, Wilkerson JW, Zhu J, et al. A strategy for improving mechanical properties of a fiber reinforced epoxy composite using functionalized carbon nanotubes. Compos Sci Technol. 2011;71(8):1089–1097.
   Web of Science ®Google Scholar
• Ye X, Zhang W, Yang R, et al. Facile synthesis of lithium containing polyhedral oligomeric phenyl silsesquioxane and its superior performance in transparency, smoke suppression and flame retardancy of epoxy resin. Compos Sci Technol. 2020;189:108004.
   Web of Science ®Google Scholar
• Adeniyi AG, Adeoye AS, Ighalo JO, et al. FEA of effective elastic properties of banana fiber-reinforced polystyrene composite. Mech Adv MaterStruct. 2021;28(18):1869–1877.
   Web of Science ®Google Scholar
• Iwuozor KO. Removal of heavy metals from their solution using polystyrene adsorbent (foil take-away disposable plates). Int J Environ Chem. 2018;2(2):10.
   Google Scholar
• Jassim AN, Alwan RM, Kadhim QA, et al. Preparation and characterization of ZnO/polystyrene nanocomposite films using ultrasound irradiation. Nanosci Nanotechnol. 2016;6:17–23.
   Google Scholar
• Adeniyi A, Onifade D, Ighalo J, et al. Extraction and characterization of natural fibres from plantain (Musa paradisiaca) stalk wastes. Iran J Energy & Environ. 2020;11(2):116–121.
   Google Scholar
• Adeniyi A, Abdulkareem S, Ndagi M, et al. Effect of fiber content on the physical and mechanical properties of plantain fiber reinforced polystyrene composite. Adv Mater Process Technol. 2022;8(4):1–13.
   Google Scholar
• Chun KS, Subramaniam V, Yeng CM, et al. Wood plastic composites made from post-used polystyrene foam and agricultural waste. J Thermoplast Composite Mater. 2019;32(11):1455–1466.
   Web of Science ®Google Scholar
• Abdulkareem S, Amosa M, Adeniyi A. Synthesis and structural analysis of aluminium-filled polystyrene composites from recycled wastes. Journal of Environmental Research, Engineering and Management. 2018;74(2):58–66.
   Google Scholar
• Adeniyi AG, Abdulkareem SA, Ighalo JO, et al. Microstructural and mechanical properties of the plantain fiber/local clay filled hybrid polystyrene composites. Mech Adv MaterStruct. 2021;29(28):1–11.
   Web of Science ®Google Scholar
• Abdulkareem S, Adeniyi A. Production of particle boards using polystyrene and bamboo wastes. Niger J Technol. 2017;36(3):788–793.
   Google Scholar
• Abdulkareem SA, Adeniyi AG. Tensile and water absorbing properties of natural fibre reinforced plastic composites from waste polystyrene and rice husk. ABUAD Journal of Engineering Research and Development (AJERD). 2018;1(2):199–204.
   Google Scholar
• Abdulkareem S, Adeniyi A. Preparation and evaluation of electrical properties of plastic composites developed from recycled polystyrene and local clay. J Technol Dev. 2018;15(3):98–101.
   Google Scholar
• Ighalo JO, Adeniyi AG. Utilization of recycled polystyrene and aluminum wastes in the development of conductive plastic composites: evaluation of electrical properties. Handb environ mater manage. 2021;47(2):285–291.
   Google Scholar
• Adeniyi A, Abdulkareem S, Ighalo J, et al. utilisation of waste plantain (musa paradisiaca) peels and waste polystyrene in the development of reinforced polymer composites. Int Polym Proc. 2020;35(3):331–337.
   Web of Science ®Google Scholar
• Adeniyi AG, Abdulkareem SA, Ighalo JO, et al. Morphological and thermal properties of polystyrene composite reinforced with biochar from elephant grass (Pennisetum purpureum). J Thermoplast Composite Mater. 2020;35(10):0892705720939169.
   Web of Science ®Google Scholar
• Onifade D, Ighalo J, Adeniyi A, et al. Morphological and thermal properties of polystyrene composite reinforced with biochar from plantain stalk fibre. Mater Int. 2020;2(2):150–156.
   Google Scholar
• Adeniyi AG, Abdulkareem SA, Ighalo JO, et al. Crystallographic, functional group and microstructural properties of oil palm biochar reinforced hybrid polystyrene composite doped with aluminium. Adv Mater Process Technol. 2021;8(3):1–12.
   Google Scholar
• Abdulkareem S, Ighalo J, Adeniyi A. Evaluation of the electrical characteristics of recycled iron reinforced polystyrene composites. Iran J Energy & Environ. 2021;12(2):125–130.
   Google Scholar
• Ighalo JO, Adeniyi AG, Onifade DV, et al. utilisation of solid wastes from polystyrene and bamboo (Bambusa vulgaris) fibres for the development of reinforced polymer composites. J Solid Waste Technol Manage. 2021;47(2):285–291.
   Google Scholar
• Sahai R, Pardeshi R, Biswas D, Effect of silane coupling agent on flexural strength and hardness of wheat straw polystyrene composites.
   Google Scholar
• Ighalo JO, Igwegbe CA, Adeniyi AG, et al. Artificial neural network modeling of the water absorption behavior of plantain peel and bamboo fibers reinforced polystyrene composites. J Macromol Sci Part B. 2021;60(7):472–484.
   Web of Science ®Google Scholar
• Adeniyi AG, Abdulkareem SA, Adeoye SA, et al. Preparation and properties of wood dust (isoberlinia doka) reinforced polystyrene composites. Polym Bull. 2021;79(6):1–19.
   Web of Science ®Google Scholar
• Abdulkareem SA, Abdulkareem MT, Ighalo JO, et al. Microstructural, functional groups and textural analysis of expanded polyethylene reinforced polystyrene composites with recycled aluminium as ternary component. Int Polym Proc. 2022;37(2):191–199.
   Web of Science ®Google Scholar
• Adeniyi AG, Ighalo JO, Odeyemi SO, et al. Statistical modeling of the moisture absorption behaviour of plantain peel and bamboo fibers reinforced polystyrene composites. Materials International. 2021;3(3):1–9.
   Google Scholar
• Abdulkareem S, Adeniyi A. Recycling copper and polystyrene from solid waste stream in developing conductive composites. J Solid Waste Technol Manage. 2019;45(1):39–44.
   Google Scholar
• Adeniyi AG, Abdulkareem SA, Amosa M, et al. Mechanical, crystallographic and microstructural analysis of polymer composites developed from iron filings and polystyrene wastes. Mech Adv Compos Struct. 2022;9(2022):137–145.
   Google Scholar
• Ighalo JO, Adeniyi AG, Owolabi OO, et al. Moisture absorption, thermal and microstructural properties of polymer composites developed from rice husk and polystyrene wastes. Int J Sustainable Eng. 2021;14(5):1049–1058.
   Web of Science ®Google Scholar
• Ramesh M, Atreya TSA, Aswin U, et al. Processing and mechanical property evaluation of banana fiber reinforced polymer composites. Procedia Eng. 2014;97:563–572.
   Google Scholar
• Adeniyi AG, Ighalo JO, Onifade DV. Banana and plantain fiber-reinforced polymer composites. J Polym Eng. 2019;39(7):597–611.
   Web of Science ®Google Scholar
• Adeniyi AG, Adeoye SA, Onifade DV, et al. Multi-scale finite element analysis of effective elastic property of sisal fiber-reinforced polystyrene composites. Mech Adv MaterStruct. 2021;28(12):1245–1253.
   Web of Science ®Google Scholar
• Adeniyi AG, Ighalo JO, Abdulkareem SA, et al. Water absorption, thermal and microstructural properties of plastic composites developed from isoberlinia doka wood sawdust and polystyrene wastes. J Inst Eng Series E. 2021;102(1):105–114.
   Google Scholar
• Emenike EC, Adeniyi AG, Omuku PE, et al. Recent advances in nano-adsorbents for the sequestration of copper from water. J Water Process Eng. 2022;47:102715.
   Web of Science ®Google Scholar
• Emenike EC, Iwuozor KO, Agbana SA, et al. Efficient recycling of disposable face masks via co-carbonization with waste biomass: a pathway to a cleaner environment. Cleaner Environ Syst. 2022;6:100094.
   Google Scholar
• Emenike EC, Ogunniyi S, Ighalo JO, et al. Delonix regia biochar potential in removing phenol from industrial wastewater. Bioresour Technol Rep. 2022;19:101195.
   Google Scholar
• Zhang Q, Zhang D, Xu H, et al. Biochar filled high-density polyethylene composites with excellent properties: towards maximizing the utilization of agricultural wastes. Ind Crops Prod. 2020;146:112185.
   Web of Science ®Google Scholar
• Alghyamah AA, Elnour AY, Shaikh H, et al. Biochar/Polypropylene composites: a study on the effect of pyrolysis temperature on crystallization kinetics, crystalline structure, and thermal stability. J King Saud Univ Sci. 2021;33(4):101409.
   Web of Science ®Google Scholar
• Adeniyi AG, Abdulkareem SA, Iwuozor KO, et al. Mechanical and microstructural properties of expanded polyethylene powder/mica filled hybrid polystyrene composites. Mech Adv MaterStruct. 2022;1–9. DOI:10.1080/15376494.2022.2059822
   Web of Science ®Google Scholar
• Adeniyi AG, Abdulkareem SA, Adeyanju CA, et al. Recycling of delonix regia pods biochar and aluminium filings in the development of thermally conducting hybrid polystyrene composites. J Polym Environ. 2022;30(8):1–13.
   Web of Science ®Google Scholar
• Adeniyi AG, Abdulkareem SA, Emenike EC, et al. Development and characterization of microstructural and mechanical properties of hybrid polystyrene composites filled with kaolin and expanded polyethylene powder. Results in Eng. 2022;14:100423.
   Google Scholar
• Adeniyi AG, Abdulkareem SA, Iwuozor KO, et al. Mechanical and microstructural properties of expanded polyethylene powder/mica filled hybrid polystyrene composites. Mech Adv MaterStruct. 2022;1–10. DOI:10.1080/15376494.2022.2059822
   Web of Science ®Google Scholar
• Adeniyi A, Abdulkareem S, Ighalo J, et al. A study on the hybrid polystyrene composite filled with elephant-grass-biochar and doped-aluminium-content. Funct Compos Struct. 2022;4(3):035006.
   Google Scholar
• Adeniyi AG, Abdulkareem SA, Odimayomi KP, et al. Production of thermally cured polystyrene composite reinforced with aluminium powder and clay. Environ Challenges. 2022;9:100608.
   Google Scholar
• Adeniyi AG, Onifade DV, Ighalo JO, et al. A review of coir fiber reinforced polymer composites. Composites Part B. Eng. 2019;176:107305.
   Google Scholar
• Adeniyi AG, Abdulkareem SA, Adeoye SA, et al. Preparation and properties of wood dust (isoberlinia doka) reinforced polystyrene composites. Polym Bull. 2022;79(6):4361–4379.
   Web of Science ®Google Scholar
• Adeniyi AG, Abdulkareem SA, Amosa M, et al. Mechanical, crystallographic, and microstructural analysis of polymer composites developed from iron filings and polystyrene wastes. Mech Adv Compos Struct. 2022;9(1):137–145.
   Google Scholar
• Huang C, Qian X, Yang R. Thermal conductivity of polymers and polymer nanocomposites. Mater Sci Eng R Rep. 2018;132:1–22.
   Web of Science ®Google Scholar
• Okubo K, Fujii T, Yamamoto Y. Development of bamboo-based polymer composites and their mechanical properties. Composites part a. Appl sci manuf. 2004;35(3):377–383.
   Web of Science ®Google Scholar
• Adeniyi AG, Amusa VT, Emenike EC, et al. Co-carbonization of waste biomass with expanded polystyrene for enhanced biochar production. Biofuels. 2022;1–9. DOI:10.1080/17597269.2022.2161133
   Google Scholar
• Adeniyi AG, Abdulkareem SA, Odimayomi KP, et al.Microstructural and thermal properties of thermally cured calcined cow bone/kaolin filled hybrid polystyrene composites. Asia-Pac J Chem Eng. 2023;e2898. n/a(n/a). doi:10.1002/apj.2898.
   Web of Science ®Google Scholar
• Das C, Tamrakar S, Kiziltas A, et al. Incorporation of biochar to improve mechanical, thermal and electrical properties of polymer composites. Polymers. 2021;13(16):2663.
   PubMed Web of Science ®Google Scholar
• Adeniyi A, Iwuozor K, Emenike E, et al. Prospects and problems in the development of biochar-filled plastic composites: a review. Funct Compos Struct. 2023;5(1):012002.
   Google Scholar
• Ighalo JO, Eletta OA, Adeniyi AG. Biomass carbonisation in retort kilns: process techniques, product quality and future perspectives. Bioresour Technol Rep. 2021;17:100934.
   Google Scholar
• Adeniyi AG, Iwuozor KO, Emenike EC, et al. One-step chemical activation for the production of engineered orange peel biochar. Emerg Mater. 2022;6(1):1–11.
   Google Scholar
• Adeniyi AG, Adeyanju CA, Emenike EC, et al. Thermal energy recovery and valorisation of Delonix regia stem for biochar production. Environ Challenges. 2022;9:100630.
   Google Scholar