Condition monitoring of low-speed bearings — a review

References

• Barrett, R. M. 1993, “Industrial vibration sensor selection: Piezo-velocity transducers (PVT)”, Proc. 17 th annual meeting, Vibration Institute, June, pp. 135-149
   Google Scholar
• Beattie, A. G. 1983, “Acoustic emission, principles and instrumentation”, J of Acoustic Emission, Vol. 2, No. 1, pp. 95–128.
   Google Scholar
• Ber & Karin, (2000), Home page, http://wxs.nl/˜uptime/lowspeed.htm.
   Google Scholar
• Berry, J. E. 1992, Required vibration analysis techniques and instrumentation on low speed machines (particularly 30 to 300 rpm machinery), Technical Associates of Charllotte, Inc, 2 nd Edition, pp. 46–47.
   Google Scholar
• Enercheck Systems, (n. d.), Using ultrasound with vibration analysis to monitor bearings, www.enerchecksystems.com/articl21.html.
   Google Scholar
• Jacobs, L., Jarzynski, J., Shi, Z., Beadle, B. & Hurabus, S. (n. d.), Sensing acoustic emission and transmission, Technical notes, Georgia Inst of Technology.
   Google Scholar
• Jamuludin, N. & Mba, D. 2002a, “Monitoring extremely slow rolling element bearings: part 1”, NDT&E International, Vol. 35, pp. 349–358.
   Google Scholar
• Jamuludin, N. & Mba, D. 2002b, “Monitoring extremely slow rolling element bearings: part 2”, NDT&E International, Vol. 35, pp. 359–366.
   Google Scholar
• Jamuludin, N., Mba, D. & Bannister, R. H. 2001, “Condition monitoring of slow-speed rolling element bearings using stress waves”, Procs of the IMechE, Vol. 215, No. 4, ProQuest Science Journal, pp. 245–271.
   Google Scholar
• Jamuludin, N., Mba, D. & Bannister, R. H. 2002, “Monitoring the lubricant condition in a low-speed rolling element bearing using high frequency stress waves”, Proc Inst of Mech Engrs, Vol. 216, Part E, J process Mech Eng, pp. 73–88.
   Google Scholar
• Jones, B. (n. d.), “Monitoring of slow speed bearings using the Microlog CMVA60 ULS (Ultra Low Speed)”, SKF Application Note CM3052.
   Google Scholar
• Kanagawa, M., Tomosada, Y. & Yamanaka, Y. 2001, “Diagnosis device for low speed rotational bearing, MK-550”, Kawasaki Steel Tech Report, No. 45, pp. 73–21.
   Google Scholar
• Li, C. J. & Li, S. Y. 1995, “Acoustic emission for bearing condition monitoring”, Wear, Vol. 185, pp. 67–74.
   Google Scholar
• Mba, D. 2002, “Application of acoustic emissions to monitoring the mechanical integrity of bolted structures in low speed rotating machinery: case study”, NDT&E International, Vol. 35, pp. 293–300.
   Google Scholar
• McFadden, P. D. & Smith, J. D. 1984, “Acoustic emission transducers for the vibration monitoring of bearing at low speed”, Proc of the Inst of Mech Engineers, Part C, Vol. 198, No. 8, pp. 127–130.
   Google Scholar
• M. C. M. E BV PdM Partners, (n. d.), Technology overview: Ultrasonic detection, www.mcme.nl/ultrasone. html.
   Google Scholar
• Mechefsky, C. K. & Mathew, J. 1992, “Fault detection and diagnosis in low speed rolling element bearings. Part 1: the use of parametric spectra”, MSSP, Vol. 6, No. 4, pp. 297–307.
   Google Scholar
• Miettinen, J. & Pataniitty, P. 1999, “Acoustic emission in monitoring extremely slowly rotating rolling bearing”, Proc of COMADEM ’99, Oxford, ISBN 1-901892-13-1, pp. 289–297.
   Google Scholar
• Miller, R. K. & McIntire, P. (n. d.), Nondestructive Testing Handbook, Vol 5: Acoustic emission testing, American Society for Nondestructive Testing, ISBN 0-931403-02-2, pp. 603.
   Google Scholar
• Murphy, T. J. 1992, “The development of a data collector for low speed machinery”, Proc of the 4 th Int Conf on Profitable Condition Monitoring, December, pp. 251–258.
   Google Scholar
• Robertson, J. C., LeVert, F. E. & Mott, J. E. 1992, “Vibration data acquisition of low speed machinery using a portable data collector and a low impedance accelerometer”, P/PM Technology, May/June, pp. 26–30.
   Google Scholar
• Robertson, J. C., Canada, R. G. & Piety, K. R. 1996, “Vibration monitoring on slow speed machinery: new methodologies covering machinery from 0.5 to 600 rpm”, 5 th Int Conf on Profitable Condition Monitoring, December.
   Google Scholar
• Schloss, F. 1993, “Accelerometer Noise”, Sound and Vibration, March, pp. 22–23.
   Google Scholar
• Smith, J. D. 1982, “Vibration monitoring of bearings at low speed”, Tribology International, Vol. 15, No. 3, pp. 139–144.
   Google Scholar
• Szrom, D. B. 1986, “Low speed bearing analysis”, Proc of the 10 th Vibration Institute Annual Meeting, Las Vegas, 24-26 June, pp. 183–188.
   Google Scholar
• Tan, C. C. 1990, “Application of acoustic emission to the detection of bearing failures”, Procs of the Tribology Conf, Brisbane, 3-5 December, pp. 110–114.
   Google Scholar
• Tandon, N. & Nakra, B. C. 1990, “Defect detection in rolling element bearings by acoustic emission method”, J of Acoustic Emission, Vol. 7, No. 1, pp. 25–28.
   Google Scholar