References
- Dechjarern, S., Busso, E. & Hibberd, R. 2004, “Effects of surface roughness on friction and wear behavior of coated cutting tools: numerical approach”, Proceeding of the International Conference on Tribology in Manufacturing Processes, Vol. 36, No. 1.
- Dahlman, P., Gunnberg, F. & Jocobson, M. 2004, “The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning”, Journal of Material Processing Technology, Vol. 147, pp. 181–184.
- Gunay, M., Aslan, E., Korkut, I. & Seker, U. 2004, “Investigation of the effect of rake angle on main cutting force”, International Journal of Machine tool and Manufacture, Vol. 44, pp. 953–959.
- Holmberg, K. & Matthews, A. 1994, Coating Tribology, Elsevier, Amsterdam, ISBN 0444888705.
- Kitagawa, T., Maekawa, K., Shirakashi, T. & Usui, E. 1989, “Analytical prediction of flank wear of carbide tools in turning plain carbon steels. Part 2. Prediction of flank wear”, Bull. Jpn. Soc. Precis. Eng., Vol. 23, No. 2, pp. 126–134.
- Kim, K. W., Lee, W. Y. & Sin, H. C. 1999, “A finite- element analysis of machining with the tool edge considered”, J. Mater. Process. Technol., Vol. 86, pp. 45–55.
- Mathew, P. 1989, “Use of predicted cutting temperatures in determining tool performance”, Int. J. Mach. Tools Manuf., Vol. 29, No. 4, pp. 481–497.
- Oxley, P. L. B. 1989, The Mechanics of Machining — An Analytical Approach to Assessing Machinability, Ellis Horwood, Chichester.
- Saglam, H., Unsacar, F. & Yaldiz, S. 2005, “Investigation of the effect of rake angle and approaching angle on main cutting force and tool tip temperature”, International Journal of Machine Tool and Manufacture, Vol. 46, pp. 132–141.
- Salio, M., Berruti, T. & De Poli, G. 2006, “Prediction of residual stress distribution after turning in turbine disks”, International Journal of Mechanical Sciences, Vol. 48, pp. 976–984.
- Takeyama, H. & Murata, T. 1963, “Basic investigations on tool wear”, Trans. ASME J. Eng. Ind., Vol. 85, pp. 33–38.
- Thiele, J. D. & Melkote, S. N. 1999, “Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel”, J. Mater. Process. Technol., Vol. 94, pp. 216–226.
- Trent, E. M. 1996, Metal cutting, Butterworth Heinneman, Oxford, UK, ISBN 0750610689.
- Usui, E., Hirota, A. & Masuko, M. 1978, “Analytical prediction of three dimensional cutting process. Part 3. Cutting temperature and crater wear of carbide tool”, Trans. ASME, Vol. 100, pp. 222–228.
- Yen Y.-C., Özel T. & Altan T. 1998, “Process modeling of turning with nose radius tools using two-dimensional FEM simulation”, ERC Technical Report HPM/ERC/NSM-98-R-27, The Ohio State University.