Application of artificial neural networks, fuzzy logic and wavelet transform in fault diagnosis via vibration signal analysis: A review

References

• Abu-Zahra, N. H. & Yu, G. 2003, “Gradual wear monitoring of turning inserts using wavelet analysis of ultrasound waves”,International Journal of Machine Tool & Manufacturer, Vol. 43, pp. 337-343.
   Google Scholar
• Alguindigue, I. E., Wicz-Buczak, A. E. & Uhrig, R. E. 1993, “Monitoring and diagnosis of rolling element bearings using artificial neural networks”,IEEE Transactions on Industrial Electronics, Vol. 40, No. 2, pp. 209-217.
   Google Scholar
• Badyopadhya, A., Mandal, S. D. & Pal, B., n. d., “Real time condition monitoring system using vibration analysis for turbine bearing”, Speech and Signal Processing Group, Calcutta, India.
   Google Scholar
• Becerikli, Y. 2004, “On three intelligent systems: dynamic neural, fuzzy, and wavelet networks for training trajectory”,Article of Neural Comput & Applic, Vol. 13, pp. 339-351.
   Google Scholar
• Biqing, W., Saxena, A., Romano, P. & George, V. 2004, “Vibration Monitoring and Fault Diagnosis of Helicopter Planetary Gears”, School of Electrical and Computer Engineering, Georgia Institute of Technology Atlanta, Georgia.
   Google Scholar
• Bloch, H. P. & Geitner, F. K. 1983,Machinery Failure Analysis and Troubleshooting, Chapter 5, Gulf Publishing Company, Houston, Texas, USA.
   Google Scholar
• Brian, T. H., Gao, R. X. & Zhang, L. 2004, “Customized Wavelet for Bearing Defect Detection”,Journal of Dynamic Systems, Measurement, and Control, Transaction of ASME, Vol. 126, pp. 740-745.
   Google Scholar
• Chung, L., Zhihuman & Ping, L. 2004, “Bearing Fault Identification via Wavelet Packet Transform and Rough Set Theory”,Proceedings of the Fifth World Congress on Intelligent Control and Automation, 15-19 June, Hangzhou, PR China, pp. 1663-1666.
   Google Scholar
• Dempsey, P. J. & Afjeh, A. 2002, “Integrating Oil Debris and Vibration Gear Damage Detection Technologies Using Fuzzy Logic”, presented at the International 58th Annual Forum and Technology Display, sponsored by the American Helicopter Society, Montreal, Canada, 11-13 June.
   Google Scholar
• Duraisamy, V., Devarajan, N. & Somasundareswari, D. 2004, “Comparative study of membership functions for design of fuzzy logic fault diagnosis system for single phase induction motor”,Academic Open Internet Journal, Vol. 13, pp. 1-6.
   Google Scholar
• Dyke, J. V. P .E. 1998, “Using an expert system for precision machine tool diagnostics: a case study”, DLI Engineering.
   Google Scholar
• Fan X. & Zuo, M. J. 2006, “Gearbox fault detection using Hilbert and wavelet packet transform”,Mechanical Systems and Signal Processing, Vol. 20, No. 4, pp. 966-982.
   Google Scholar
• Fillippetti, F., Franceschini, G. & Tassoni, C. 1995, “Neural Network aided online diagnostic of induction motor rotor faults”,IEEE Transactions on Industrial Electronics, Vol. 31, No. 4, July/August, pp. 892-899.
   Google Scholar
• Fillippetti, F., Franceschini, G. & Tassoni, C. 2000, “Recent developments of induction motor drives fault diagnostics using AI techniques”,IEEE Transactions on Industrial Electronics, Vol. 47, No. 5, October, pp. 994-1003.
   Google Scholar
• Goddu, G., Li, B., Chow, M. Y. & Hung, J. C. 1998, “Motor bearing fault diagnosis by a fundamental frequency amplitude based fuzzy decision system”,Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (IECON '98), Aachen, Germany, August-September, Vol. 4, pp. 1961-1965.
   Google Scholar
• Goode, P. V. & Chow, M. Y. 1995a, “Using a Neural/Fuzzy system to extract Heuristic knowledge of incipient faults in induction motor: Part I-Methodology”,IEEE Transactions on Industrial Electronics, Vol. 42, No. 2, April, pp. 131-138.
   Google Scholar
• Goode, P. V. & Chow, M. Y. 1995b, “Using a Neural/Fuzzy system to extract Heuristic knowledge of incipient faults in induction motor: Part II-Application”,IEEE Transactions on Industrial Electronics, Vol. 42, No. 2, April, pp. 139-148.
   Google Scholar
• Jayaswal, P., Wadhwani, A. K. & Mulchandani, K. B. 2008a, “Vibration based monitoring and analysis”,Asset Management and Maintenance Journal, Australia, Vol. 21, No. 1, January, pp. 52-57.
   Google Scholar
• Jayaswal, P., Wadhwani, A. K. & Mulchandani, K. B. 2008b, “Rolling Element Bearing Fault Detection via Vibration Signal Analysis”,IJST Journal of Science and Technology, India, Vol. 3, June.
   Google Scholar
• Jayaswal, P., Wadhwani, A. K. & Mulchandani, K. B. 2008c, “Machine fault signature analysis”,International Journal of Rotating Machines, New York, USA, Vol. 2008.
   Google Scholar
• Jun P. & Lias, M. F. 2007, “A wavelet based method for extracting rolling element bearing vibration signal envelope”,Proceedings of the WSEAS International Conference on Computer Engineering and Applications, Gold Coast, Australia, January, pp. 181-186.
   Google Scholar
• Kowalski, C. T. & Kowalska, T. O. 2003, “Neural networks application for induction motor faults diagnosis”,Mathematics and Computers in Simulation, Vol. 63.
   Google Scholar
• Lebold, M., McClintic, K., Campbell, R., Byington, C. & Maynard, K. 2000, “Review of vibration analysis method for gearbox diagnostic and prognostics”,Proceedings of the 54th Meeting of the Society for Machinery Failure Prevention Technology, Verginia Beach, Va, USA, May, pp. 623-634.
   Google Scholar
• Lei, Y., Kire, M. & Kenny, T. W. 2003, “Statistical damage detection using time series analysis on a structural health monitoring benchmark problem”,Proceedings of the 9th International Conference on Applications of Statistics and Probability in Civil Engineering, San Francisco, Calif, USA, July.
   Google Scholar
• Li, B., Chow, M. Y. & Tipsuwan, Y. 2000, “Neural-Network-Based Motor Rolling Bearing Fault Diagnosis”,IEEE Transactions on Industrial Electronics, Vol. 47, No. 5, October, pp. 1060-1069.
   Google Scholar
• Li, S. & Elbestawl, M. A. 1996, “Fuzzy leistering for automated tool condition monitoring in machining”,System and Signal Processing, pp. 533-550.
   Google Scholar
• Li, B., Goddu, G. & Chow, M. Y. 1998, “Detection of common motor bearing faults using frequency-domain vibration signals and a neural network based approach”,Proceedings of the American Control Conference, Vol. 4, Philadelphia, Pa, USA, June, pp. 2032-2036.
   Google Scholar
• Lin, J., Zuo, M. J. & Fyfe, K. R. 2004, “Mechanical fault detection based on the wavelet de-noising technique”,Journal of Vibration and Acoustics, Vol. 126, No. 1, pp. 9-16.
   Google Scholar
• Lindh, T., Ahola, P., Spatenka, & Rautiainen A.-L., n. d., “Automatic bearing fault classification combining statistical classification and fuzzy logic”, Lappeenranta University of Technology, Lappeenranta, Finland.
   Google Scholar
• MacInerny, S. A. & Dai, Y. 2003, “Basic vibration signal processing for bearing fault detection”,IEEE Transactions on Education, Vol. 46, No. 1, February, pp. 149-156.
   Google Scholar
• Mann, L., Saxena, A. & Knapp, G. M. 1995, “Statistical-based or condition-based preventive maintenance”,Journal of Quality in Maintenance Engineering, Vol. 1, No. 1, pp. 1355-2511.
   Google Scholar
• Mohanta, H. K. & Gupta, R. K. 2005, “Application of wavelet transform in control: A Review”, The ICFAIJournal of Science and Technology, Vol. 1, March, pp. 7-26.
   Google Scholar
• Nadgir, A. & Ozel, T. 2000, “Neural network modeling of flank wear for tool conditions monitoring in orthogonal cutting of hardened steels”, 4th International Conference on Engineering and Automation, Orlondo, Florida, USA.
   Google Scholar
• Norton, M. P. & Karczub, D. G. 2003,Fundamentals of Noise and Vibration Analysis for Engineers, 2nd edition, Chapter 8, United Kingdom at the University Press, Cambridge, UK.
   Google Scholar
• Ocak, H. & Loparo, K. A. 2004, “Estimating the running speed and the bearing key frequencies of an instruction motor from vibration data”,Mechanical Systems and Signal Processing, Vol. 18, No. 3, pp. 515-533.
   Google Scholar
• Pemean, J. & Yin, C. V. 1994, “Feasibility of using unsupervised learning artificial neural networks, for the condition monitoring of electrical machines”,IEE Proceedings of Electronic Power Application.
   Google Scholar
• Peng Z. K. & Chu, F. L. 2004, “Application of the wavelet transform in machine condition monitoring and fault diagnosis: a review with bibliography”,Mechanical System and Signal Processing, Elsevier Ltd., Vol. 18, pp. 199-221.
   Google Scholar
• Plenge, M. Lammering, R. Walz, T. & Ettemeyer, A. 2004, “Optical inspection techniques for vibration analysis and defect indication in railway”,Proceedings of the 16th WCNDT World Conference on NDT, Montreal, Canada, August-September.
   Google Scholar
• Poyhonen, S., Negrea, M., Arkkio, A., Hyotyniemi, H. & Koivo, H. 2002, “Support vector classification for fault diagnosis of an electrical machine”,Proceedings of the 6th International Conference on Signal Processing (ICSP '02), Helsinki University of Technology, Finland, August, Vol. 2, pp. 1719-1722.
   Google Scholar
• Purushotham, V. Suryanarayana, N. & Prasad, A. N. 2005, “Multi-fault diagnosis of rolling bearing elements using wavelet analysis and hidden Markov model based fault recognition”,NDT & E International, Vol. 38, No. 8, December, pp. 654-664.
   Google Scholar
• Rajasekaran, S. & Vijaylakshmi, P. G. A. 2004,Neural Networks Fuzzy Logic, and Genetic Algorithms, Prentice-Hall of India Private Limited, New Delhi, India, Chapter 1, pp. 3.
   Google Scholar
• Renwick, J. T. & Babson, P. E. 1985, “Vibration analysis – a proven technique as a productions maintenance tool”,IEEE Transactions on Industry Applications, Vol. 21, No. 2, pp. 324-332.
   Google Scholar
• Sahinkaya, M. N., Cole, M. O. T. & Burrows, C. R. 2001, “Fault detection and tolerance in synchronous vibration control of rotor-magnetic bearing system”,Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 215, No. 12, pp. 1401-1416.
   Google Scholar
• Samanta, S., Al-Balushi, K. R. & Al-Araimi, S. A. 2004, “Bearing Fault Detection Using Artificial Neural Networks and Genetic Algorithm”,EURASIP Journal of Applied Signal Processing, pp. 366-377.
   Google Scholar
• Satish, B. & Sharma, D. R. 2005, “A fuzzy BP approach for diagnostics and prognosis of bearing faults in induction motors”,IEEE Power Engineering Society General Meeting, San Francisco, Calif., USA, June, Vol. 3, pp. 2291-2294.
   Google Scholar
• Shao, Y. & Nezu, K. 2000, “Prognosis of remaining life using neural networks”,Proceedings of Institution of Mechanical Engineers, Vol. 214, Part I, pp. 217-230.
   Google Scholar
• Shi, D. F., Wang, W. J. & Qu, L. S. 2004, “Defect detection for bearings using envelope spectra of wavelet transform”,Journal of Vibration and Acoustics, Vol. 126, No. 4, pp. 567-573.
   Google Scholar
• Shikari, B. & Sadiwala, C. M. 2004, “Automation in Condition Based Maintenance using vibration analysis”, MANIT Bhopal, India.
   Google Scholar
• Sima, J. 1995, “Neural expert systems”,Neural Networks, Vol. 8, No. 2, pp. 261-271.
   Google Scholar
• Smith, A. E. & Coit, D. W., n. d., “A neural Network approach to condition Based Maintenance; Case study of Airport Ground Transportation vehicles”, Department of Industrial and Systems Engineering, Auburn University, USA.
   Google Scholar
• Sohn, H. & Farrar, C. R. 2001, “Damage diagnosis using time series analysis of vibration signals”,Journal of Smart Material and Structures Institute of Physics, Vol. 10, pp. 446-451.
   Google Scholar
• Stack, J. R., Habetler, T. G. & Harley, R. G. 2003, “Fault classification and fault signature production for rolling element bearings”,Proceedings of the 4th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED '03), Atlanta, Ga, USA, August, pp. 172-176.
   Google Scholar
• Sun, Q., Chen, P., Zhang, D. & Xi, F. 2004, “Pattern recognition for automatic machinery fault diagnosis”,Journal of Vibration and Acoustics, Vol. 126, No. 2, pp. 307-316.
   Google Scholar
• Tansel, I. N., Mekdeci, C. & Mclaughlin, C. 1995, “Detection of Tool Failure in End Milling with Wavelet Transformations and Neural Networks”,International Journal of Tools Manufacturing, Vol. 35, pp. 1137-1147.
   Google Scholar
• Tomsovic, K. & Barr, B., n. d., “Fuzzy information approaches to equipment condition motoring and diagnosis”, School of Electrical Engg and Comp. Science, Washington State University, USA.
   Google Scholar
• Torbatian, M., Kahaei, M. H. & Poshta, J., n. d., “Bearing Fault Detection using Level-Dependent Noise Reduction Technique”, Department of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran.
   Google Scholar
• Verma, S. P. & Balan, A. 1998, “Experimental investigations on the stations of electrical machines in relation to vibration and noise problems”,IEE Proceedings on Electric Power Applications, Vol. 145, No. 5, pp. 455-461.
   Google Scholar
• Weqerich, S. W., Wilks, A. D. & Pipke, R. M. 2003, “Nonparametric modeling of vibration signal features for equipment health monitoring”,Proceedings of the IEEE Aerospace Conference, Big Sky, Mont, USA, March, Vol. 7, pp. 3113-3121.
   Google Scholar
• Ya, W., Escande, P. & Du, R. 2001, “A new method for real time tool condition monitoring in transfer machining stations”,Journal of Manufacturing Science and Engineering, ASME, pp. 339-347.
   Google Scholar
• Yang, D. M., Stronach, A. F. & MacConnell, P. 2003, “The application of advanced signal processing techniques to induction motor bearing condition monitoring”,Meccanica, Vol. 38, No. 2, pp. 297-308.
   Google Scholar
• Zhang, G. P. 2000, “Neural Networks for classification: A Survey”,IEEE Transactions on Systems, Man, and Cybernetics, Part C: Applications and Reviews, Vol. 30, No. 4, November.
   Google Scholar
• Zhange, L. S., Props, N. & Vachtseranas, G., n. d., “A novel architecture for an integrated fault diagnostic/prognostic system”, Georgina Institute Technology.
   Google Scholar
• Zhenya, H., Meng, W. & Bi, G. 1992, “Neural network and its application on machinery fault diagnosis”,Proceedings of the IEEE International Conference on Systems Engineering, Kobe, Japan, September, pp. 576-579.
   Google Scholar
• Zidani, F., Benbouzid, H. E. M., Diallo, D. & Mohamed, S. N. 2003, “Induction motor stator faults diagnosis by a current Concordia pattern-based fuzzy decision system”,IEEE Transactions on Energy Conversion, Vol. 18, No. 4, December, pp. 469-475.
   Google Scholar