The mechanical properties optimization of Al-6Si-0.5 Mg-2Cu-2Ni alloy by precipitation hardening

References

• Belov, N. A., D. G. Eskin, and N. N. Avxentieva. 2005. “Constituent Phase Diagrams of the Al–Cu–Fe–Mg–Ni–Si System and their Application to the Analysis of Aluminum Piston Alloys.” Acta Materials 53: 4709–4722.10.1016/j.actamat.2005.07.003
   Web of Science ®Google Scholar
• Cho, Y. H., D. H. Joo, C. H. Kim, and H. C. Lee. 2006. “The Effect of Alloy Addition on the High Temperature Properties of Over Aged AlSi(CuMgNi) Cast Alloy.” Materials Science Forum 519–521: 461–466.10.4028/www.scientific.net/MSF.519-521
   Google Scholar
• Garcia-Hnojosa, J. A., C. R. Gonzalez, G. M. Gonzalez, and Y. Houbaert. 2003. “Structure and Properties of Al7Si-Ni and Al-7Si-Cu Cast Alloys Non Modified and Modified with Strontium.” Journal of Materials Processing Technology 306: 143–144.
   Google Scholar
• Gruzleski, J. E., and B. M. Closet. 1990. The treatment of liquid aluminium silicon alloys, 1–254. 1st ed. Des Plaines, Illinois: American Foundrymen’s Society.
   Google Scholar
• Gupta, A. K., A. K. Jena, M. C. Chaturvedi. 1987. “Insoluble Phase in Al-1.52Cu-0.75 Mg Alloys Containing Silicon.” Materials Science and Technology 3 (12): 1012–1018.10.1179/mst.1987.3.12.1012
   Web of Science ®Google Scholar
• Han, Y. M., A. M. Samuel, F. H. Samuel, and H. W. Doty. 2008. “Dissolution of Al2Cu Phase in Non-modified and Sr Modified 319 Type Alloys.” International Journal of Cast Metals Research 21: 387–393.10.1179/136404608X347662
   Web of Science ®Google Scholar
• He, K. , F. Yu, D. Zhao, and L. Zuo. 2011. “Microstructural Evolution of Direct Chill Cast Al-15.5Si-4Cu-1 Mg-1Ni-0.5Cr Alloy during Solution Treatment.” China Foundry 8 (3): 264–268.
   Web of Science ®Google Scholar
• Kezhun, H, Y. Fuxiao, , Z.Dazhi, , and Z.Liang 2011. “Microstructural Evolution of Direct Chill Cast Al-15.5Si-4Cu-1 Mg-1Ni-0.5Cr Alloy during Solution Treatment.” China foundry 8 (3): 264–268.
   Web of Science ®Google Scholar
• Kobayashi, T. 2000. “Strength and Fracture of Aluminum Alloy.” Materials Science and Engineering A 286: 333–341.10.1016/S0921-5093(00)00935-7
   Google Scholar
• Lasa, L., and J. M. Rodriguez-Ibabe. 2004. “Evolution of the Main Intermetallic Phases in Al–Si–Cu–Mg Casting Alloys during Solution Treatment.” Journal of Materials Science 39: 1343–1355.10.1023/B:JMSC.0000013895.72084.c9
   Web of Science ®Google Scholar
• Li, Y. J., S. Brusethaug, and A. Olsen. 2006. “Influence of Cu on the Mechanical Properties and Precipitation Behavior of AlSi7Mg0.5 Alloy during Aging Treatment.” Scripta Materialia 54: 99–103.
   Web of Science ®Google Scholar
• Man, Jin, Jing Li, and Shao Guang Jie. 2007. “The Effects of Cu Addition on the Microstructure and Thermal Stability of an Al–Mg–Si Alloy.” Journal of Alloys and Compounds 437: 146–150.10.1016/j.jallcom.2006.07.113
   Web of Science ®Google Scholar
• Mohamed, A. M. A., A. M. Samuel, F. H. Samuel, and H. W. Doty. 2009. “Influence of Additives on the Microstructure and Tensile Properties of Near-eutectic Al–10.8% Si Cast Alloy.” Materials & Design 30: 3943–3957.10.1016/j.matdes.2009.05.042
   Web of Science ®Google Scholar
• Ouellet, P., and F. H. Samuel. 1999. “Effect of Mg on the Ageing Behaviour of Al-Si-Cu 319 Type Aluminium Casting Alloys.” Journal of Materials Science 34 (19): 4671–4697.10.1023/A:1004645928886
   Web of Science ®Google Scholar
• Polmear I. J. 1989. Light Alloys, Metallurgy of the Light Metals. 2nd ed. London: Edward Arnold.
   Google Scholar
• Qian, Z., X. F. Liu, and D. G. Zhao. 2008. “Effects of Trace Mn Addition on the Elevated Temperature Tensile Strength and Microstructure of a Low-iron Al–Si Piston Alloy.” Materials Letters 62: 2146–2149.10.1016/j.matlet.2007.11.035
   Web of Science ®Google Scholar
• Samuel, F. H. 1998. “Incipient Melting of Al5Mg8Si6Cu2 and Al2Cu Intermetallics in Unmodified and Sr-modified Al-Si-Cu-Mg Alloys during Solution Heat Treatment.” Journal of Materials Science 33: 2283–2297.10.1023/A:1004383203476
   Web of Science ®Google Scholar
• Shabestari, S. G., and H. Moemeni. 2004. “Effect of Copper and Solidification Conditions on the Microstructure and Mechanical Properties of Al–Si–Mg Alloys.” Journal of Materials Processing Technology 193: 153–154.
   Google Scholar
• Stadler, F., H. Antrekowitsch, W. Fragner, H. Kaufmann, and P. J. Uggowitzer. 2011. “The Effect of Ni on the High-Temperature Strength of Al–Si Cast Alloys.” Materials Science Forum 690: 274–277.10.4028/www.scientific.net/MSF.690
   Google Scholar
• Stadler, F., H. Antrekowitsch, W. Fragner, H. Kaufmann, and P. J. Uggowitzer. 2012. “Effect of Main Alloying Elements on the Strength of Al–Si Cast Alloys at Elevated Temperatures.” International Journal of Cast Metals Research 25 (4): 215–224.10.1179/1743133612Y.0000000004
   Web of Science ®Google Scholar
• Tsao, C. S., C. Y. Chen, U. S. Jeng, and T. Y. Kuo. 2006. “Precipitation Kinetics and Transformation of Metastable Phases in Al–Mg–Si Alloys.” Acta Materialia 54: 4621–4631.10.1016/j.actamat.2006.06.005
   Web of Science ®Google Scholar
• Wang, S. H., J. Y. Uan, T. S. Lui, and L. H. Chen. 2002. “Examination on the Aging and Tensile Properties of Al-Zn-Mg/Al3Ni Eutectic Composite.” Metallurgical and Materials Transactions A 33: 707–711.10.1007/s11661-002-0135-0
   Web of Science ®Google Scholar
• Zeren, M. 2007. “The Effect of Heat-treatment on Aluminum-based Piston Alloys.” Materials & Design 28: 2511–2517.10.1016/j.matdes.2006.09.010
   Web of Science ®Google Scholar