References
- Assempour, A., R. Hashemi, K. Abrinia, M. Ganjiani, and E. Masoumi. 2009. “A Methodology for Prediction of Forming Limit Stress Diagrams Considering the Strain Path Effect.” Computational Materials Science 45: 195–204.10.1016/j.commatsci.2008.09.025
- Bhatnagar, N., N. Ramakrishnan, N. K. Naik, and R. Komanduri. 1995. “On the Machining of Fiber Reinforced Plastic (FRP) Composite Laminates.” International Journal of Machine Tools and Manufacture 35: 701–716.10.1016/0890-6955(95)93039-9
- Cheng, P. J., and S. C. Lin. 2010. “Using Neural Networks to Predict Bending Angle of Sheet Metal Formed by Laser.” International Journal of Machine Tools and Manufacture 40: 1185–1197.
- Davim, J. P., P. Resis, V. Lana, and C. Antonio. 1999. “Machinability Study on Composite Polyethere-Therketone (PEEK) Unreinforced and Reinforced (GF 30) for Application in Structural Components.” Journal of Composite Structures 62 (89–90): 292–297.
- Demuth, H., and M. Beale. 2000. “Neural Network Toolbox User’s Guide, Version 4 (Release 12).” Drive Natick, MA: The Mathworks.
- Erkan, O., B. Işık, A. Çiçek, and F. Kara. 2012. “Prediction of Damage Factor in End Milling of Glass Fibre Reinforced Plastic Composites Using Artificial Neural Network.” Applied Composite Materials 20 (4): 517–536.
- Hull, D., and T. W. Clyne. 1996. An Introduction to Composite Materials. 2nd ed. New York: Cambridge University Press.10.1017/CBO9781139170130
- Karnik, S. R., V. N. Gaitonde, and J. P. Davim. 2007. “A Comparative Study of the ANN and RSM Modelling Approaches Predicting Burr Size in Drilling.” The International Journal of Advanced Manufacturing Technology 38 (9–10): 868–883.
- Palanikumar, K., L. Karunamoorthy, and R. Karthikeyan. 2006. “Assessment of Factors Influencing Surface Roughness on the Machining of Glass Fiber-reinforced Polymer Composites.” Materials & Design 27: 862–871.10.1016/j.matdes.2005.03.011
- Palanikumar, K., L. Karunamoorthy, R. Karthikeyan, and B. Latha. 2006. “Optimization of Machining Parameters in Turning GFRP Composites Using a Carbide (K10) Tool Based on the Taguchi Method with Fuzzy Logics.” Metals and Materials International 12: 483–491.10.1007/BF03027748
- Palanikumar, K., L. Karunamoorthy, S. B. Ramesh, and S. Jeaudeen. 2005. “Application of ANN for Prediction of Tool Wear in Machining of GFRP Composites.” Proceedings of International Conference on Recent Advancein Material Processing Technology, 95–104. New Delhi: Allied.
- Ramkumar, J., S. Aravindan, S. K. Malhotra, and R. Krishnamoorthy. 2004. “An Enhancement of the Machining Performance of GFRP by Oscillatory Assisted Drilling.” International Journal of Advanced Manufacturing Technology 23: 240–244.
- Ramulu, M., D. Arola, and K. Colligan. 1994. “Preliminary Investigation of Effects on the Surface Integrity of Fibre Reinforced Plastics.” Engineering Systems Design and Analysis 2, ASME 64: 93–101.
- Rao, G. V. G., P. Mahajan, and N. Bhatnagar. 2007. “Micro-mechanical Modeling of Machining of FRP Composites – Cutting Force Analysis.” Composites Science and Technology 67: 579–593.10.1016/j.compscitech.2006.08.010
- Santhanakrishnan, G., R. Krishnamurthy, and S. K. Malhotra. 1988. “Machinability Characteristics of Fibre Reinforced Plastics Composites.” Journal of Mechanical Working Technology 17: 195–204.10.1016/0378-3804(88)90021-6
- Sheikh Ahmad, J. Y. 2009. Machining of Polymer Composites. New York: Springer Science + Business Media LLC.10.1007/978-0-387-68619-6
- Sivasankaran, S., R. Narayanasamy, T. Ramesh, and M. Prabhakar. 2009. “Analysis of Workability Behavior of Al–SiC P/M Composites Using Backpropagation Neural Network Model and Statistical Technique.” Computational Materials Science 47: 46–59.10.1016/j.commatsci.2009.06.013
- Sreejith, P. S., R. Krishnamurthy, S. K. Malhotra, and K. Narayanasamy. 2000. “Evaluation of PCD Tool Performance during Machining of Carbon/Phenolic Ablative Composites.” Journal of Materials Processing Technology 104: 53–58.10.1016/S0924-0136(00)00549-5
- Tsao, C. C. 2008. “Influence of Drill Geometry in Drilling Carbon Fiber Reinforced Plastics Key Engineering Materials.” Advances in Machining & Manufacturing Technology IX: 236–240.
- Zhong, Z. W., L. P. Khoo, and S. T. Han. 2006. “Prediction of Surface Roughness of Turned Surfaces Using Neural Networks.” The International Journal of Advanced Manufacturing Technology 28: 688–693.10.1007/s00170-004-2429-4