Modelling and multi-objective optimisation of squeeze casting process using regression analysis and genetic algorithm

References

• Bin, S. B., S. M. Xing, N. Zhao, and L. Li. 2013. “Influence of Technical Parameters on Strength and Ductility of AlSi9Cu3 Alloys in Squeeze Casting.” Transactions of Nonferrous Metals Society of China 23 (4): 977–982.10.1016/S1003-6326(13)62555-8
   Web of Science ®Google Scholar
• Britnell, D. J., and K. Neailey. 2003. “Macrosegregation in Thin Walled Castings Produced via the Direct Squeeze Casting Process.” Journal of Materials Processing Technology 138 (1–3): 306–310.10.1016/S0924-0136(03)00090-6
   Web of Science ®Google Scholar
• Chattopadhyay, H. 2007. “Simulation of Transport Processes in Squeeze Casting.” Journal of Materials Processing Technology 186: 174–178.10.1016/j.jmatprotec.2006.12.038
   Web of Science ®Google Scholar
• Chen, W. P., Y. Y. Li, G. W. Guo, D. T. Zhang, Y. Long, and T. L. Nagi. 2002. “Squeeze Casting of Al–Cu Alloy.” Journal of Central South University of Technology 9 (3): 159–164.10.1007/s11771-002-0018-y
   Web of Science ®Google Scholar
• Ghomashchi, M. R., and A. Vikhrov. 2000. “Squeeze Casting: An Overview.” Journal of Materials Processing Technology 101 (1–3): 1–9.10.1016/S0924-0136(99)00291-5
   Web of Science ®Google Scholar
• Hegde, S., and K. N. Prabhu. 2008. “Modification of Eutectic Silicon in Al–Si Alloys.” Journal of Materials Science 43 (9): 3009–3027.10.1007/s10853-008-2505-5
   Web of Science ®Google Scholar
• Hosseini, V. A., S. G. Shabestari, and R. Gholizadeh. 2013. “Study on the Effect of Cooling Rate on the Solidification Parameters, Microstructure, and Mechanical Properties of LM13 Alloy Using Cooling Curve Thermal Analysis Technique.” Materials & Design 50: 7–14.
   Web of Science ®Google Scholar
• Kittur, J. K., and M. B. Parappagoudar. 2012. “Forward and Reverse Mappings in Die Casting Process by Neural Network-based Approaches.” Journal for Manufacturing Science and Production 12 (1): 65–80.
   Google Scholar
• Maleki, A., A. Shafyei, and B. Niroumand. 2009. “Effects of Squeeze Casting Parameters on the Microstructure of LM13 Alloy.” Journal of Materials Processing Technology 209 (8): 3790–3797.10.1016/j.jmatprotec.2008.08.035
   Web of Science ®Google Scholar
• Parappagoudar, M. B., D. K. Pratihar, and G. L. Datta. 2007a. “Linear and Non-linear Statistical Modelling of Green Sand Mould System.” International Journal of Cast Metals Research 20 (1): 1–13.10.1179/136404607X184952
   Web of Science ®Google Scholar
• Parappagoudar, M. B., D. K. Pratihar, and G. L. Datta. 2007b. “Modelling of Input–Output Relationships in Cement Bonded Moulding Sand System Using Neural Networks.” International Journal of Cast Metals Research 20 (5): 265–274.
   Web of Science ®Google Scholar
• Parappagoudar, M. B., D. K. Pratihar, and G. L. Datta. 2008. “Forward and Reverse Mappings in Green Sand Mould System Using Neural Networks.” Applied Soft Computing 8 (1): 239–260.10.1016/j.asoc.2007.01.005
   Web of Science ®Google Scholar
• Parappagoudar, M. B., D. K. Pratihar, and G. L. Datta. 2009. “Neural Network-based Approaches for Forward and Reverse Mappings of Sodium Silicate-bonded, Carbon Dioxide Gas Hardened Moulding Sand System.” Materials and Manufacturing Processes 24 (1): 59–67.10.1080/10426910802543681
   Web of Science ®Google Scholar
• Rajagopal, S. 1981. “Squeeze Casting: A Review and Update.” Journal of Applied Metal Working 1: 3–14.10.1007/BF02834341
   Google Scholar
• Ravi, K. R., R. M. Pillai, K. R. Amaranathan, B. C. Pai, and M. Chakraborty. 2008. “Fluidity of Aluminum Alloys and Composites: A Review.” Journal of Alloys and Compounds 456 (1–2): 201–210.10.1016/j.jallcom.2007.02.038
   Web of Science ®Google Scholar
• Risbood, K. A., U. S. Dixit, and A. D. Sahasrabudhe. 2013. “Prediction of Surface Roughness and Dimensional Deviation by Measuring Cutting Forces and Vibrations in Turning Process.” Journal of Materials Processing Technology 132 (1): 203–214.
   Google Scholar
• Senthil, P., and K. S. Amirthagadeswaran. 2012. “Optimization of Squeeze Casting Parameters for Non Symmetrical AC2A Aluminium Alloy Castings through Taguchi Method.” Journal of Mechanical Science and Technology 26 (4): 1141–1147.10.1007/s12206-012-0215-z
   Web of Science ®Google Scholar
• Senthil, P., and K. S. Amirthagadeswaran. 2013. “Enhancing Wear Resistance of Squeeze Cast AC2A Aluminum Alloy.” International Journal of Engineering-Transactions A: Basics 26 (4): 365–374.
   Google Scholar
• Senthil, P., and K. S. Amirthagadeswaran. 2014. “Experimental Study and Squeeze Casting Process Optimization for High Quality AC2A Aluminium Alloy Castings.” Arabian Journal for Science and Engineering 39 (3): 2215–2225. doi:10.1007/s13369-013-0752-5.
   Web of Science ®Google Scholar
• Singh, R., and R. Kapoor. 2013, “Effect of Phase Pressure on Casting Properties in Cold Chamber Die Casting Process.” Journal of the Institution of Engineers (India): Series C 94 (2): 147–153.10.1007/s40032-013-0066-0
   Google Scholar
• Sjotrom, J., and J. Bergstrom. 2002. “Evaluation of the Cyclic Behaviour during High Temperature Fatigue of Hot Work Tool Steels.” In Proceedings of the ITC-VI, 603–616. Karlstad.
   Google Scholar
• Surekha, B., L. K. Kaushik, A. K. Panduy, P. R. Vundavilli, and M. B. Parappagoudar. 2012. “Multi-objective Optimization of Green Sand Mould System using Evolutionary Algorithms.” The International Journal of Advanced Manufacturing Technology 58 (1–4): 9–17.10.1007/s00170-011-3365-8
   Web of Science ®Google Scholar
• Surekha, B., R. D. Hanumantha, R. K. G. Mohan, P. R. Vundavilli, and M. B. Parappagoudar. 2012. “Modeling and Analysis of Resin Bonded Sand Mould System Using Design of Experiments and Central Composite Design.” Journal for Manufacturing Science and Production 12 (1): 31–50.
   Google Scholar
• Vijian, P., and V. P. Arunachalam. 2006. “Optimization of Squeeze Cast Parameters of LM6 Aluminium Alloy for Surface Roughness Using Taguchi Method.” Journal of Materials Processing Technology 180: 161–166.10.1016/j.jmatprotec.2006.05.016
   Web of Science ®Google Scholar
• Vijian, P., and V. P. Arunachalam. 2007a. “Modelling and Multi Objective Optimization of LM24 Aluminium Alloy Squeeze Cast Process Parameters Using Genetic Algorithm.” Journal of Materials Processing Technology 186 (1–3): 82–86.10.1016/j.jmatprotec.2006.12.019
   Web of Science ®Google Scholar
• Vijian, P., and V. P. Arunachalam. 2007b. “Optimization of Squeeze Casting Process Parameters Using Taguchi Analysis.” The International Journal of Advanced Manufacturing Technology 33: 1122–1127.10.1007/s00170-006-0550-2
   Web of Science ®Google Scholar
• Vijian, P., V. P. Arunachalam, and S. Charles. 2007. “Study of Surface Roughness in Squeeze Casting LM6 Aluminium Alloy Using Taguchi Method.” Indian Journal of Engineering & Materials Sciences 14: 7–11.
   Web of Science ®Google Scholar
• Yang, L. J. 2003. “The Effect of Casting Temperature on the Properties of Squeeze Cast Aluminium and Zinc Alloys.” Journal of Materials Processing Technology 140 (1–3): 391–396.10.1016/S0924-0136(03)00763-5
   Web of Science ®Google Scholar
• Yang, L. J. 2007. “The Effect of Solidification Time in Squeeze Casting of Aluminium and Zinc Alloys.” Journal of Materials Processing Technology 192–193: 114–120.10.1016/j.jmatprotec.2007.04.025
   Web of Science ®Google Scholar
• Yue, T. M. 1997. “Squeeze Casting of High-strength Aluminium Wrought Alloy AA7010.” Journal of Materials Processing Technology 66 (1–3): 179–185.10.1016/S0924-0136(96)02516-2
   Web of Science ®Google Scholar