References
- Allen, S., and D. Dutta. 1994. On the computation of part orientation using support structures in layered manufacturing. Technical Report UM-MEAM-TR-94-15. Ann Arbour: Department of Mechanical Engineering, University of Michigan.
- Athreya, S. R., K. Kalaitzidou, and S. Das. 2011. “Mechanical and Microstructural Properties of Nylon-12/carbon Clack Composites: Selective Laser Sintering Versus Melt Compounding and Injection Molding.” Composites Science and Technology 71 (4): 506–510.
- Bassoli, E., A. Gatto, and L. Iuliano. 2012. “Joining Mechanisms and Mechanical Properties of PA Composites Obtained by Selective Laser Sintering.” Rapid Prototyping Journal 18: 1355–2546.
- Belavendram, N. 1999. Quality by Design. Singapore: Prentice Hall.
- Caydas, Ulas, and Ahmet Hascalık. 2008. “A Study on Surface Roughness in Abrasive Waterjet Machining Process Using Artificial Neural Networks and Regression Analysis Method.” Journal of Materials Processing Technology 202: 574–582.10.1016/j.jmatprotec.2007.10.024
- Chakradhar, D., and Venu A. Gopal. 2011. “Parametric Optimization in Electro Chemical Machining of EN-31 Steel Based on Grey Relation Approach.” Applied Mechanics and Materials 110–116: 1649–1656.
- Choi, S. H., and S. Samavedam. 2002. “Modeling and Optimization of Rapid Prototyping.” Computers in Industry 47(1): 39–53.
- Frank, D., and G. Fadel. 1995. “Expert System-based Selection of the Preferred Direction of Build for Rapid Prototyping Processes.” Journal of Intelligent Manufacturing 6 (5): 339–345.10.1007/BF00124677
- Franco, A., M. Lanzetta, and L. Romoli. 1995. “Experimental Analysis of Selective Laser Sintering of Polyamide Powders: An Energy Perspective.” Journal of Cleaner Production 18 (16): 1722–1730.
- Hur, S. M., K. -H. Choi, S. -H. Lee, and P. -K. Chang. 2001. “Determination of Fabricating Orientation and Packing in SLS Process.” Journal of Materials Processing Technology 112 (2–3): 236–243.10.1016/S0924-0136(01)00581-7
- Liu, K., Y. Shi, L. Chenhui, L. Hao, J. Liu, and Q. Wei. 2014. “Indirect Selective Laser Sintering of Epoxy Resin-Al2O3 Ceramic Powders Combined with Cold Isostatic Pressing.” Ceramics International 40 (5): 7099–7106.
- Masood, S. H., and B. S. Lim. 1995. “Concurrent Intelligent Rapid Prototyping Environment.” Journal of Intelligent Manufacturing 6 (5): 291–310.10.1007/BF00124674
- Minitab, Inc. 2004. “Minitab Statistical Software.” Release 14 (12).
- Ross, P. J. 1999. Taguchi Techniques for Quality Engineering. Singapore: McGraw- Hill.
- Samant, A. N., Sameerr Paital, and Narendrab Dahotre. 2008. “Process Optimization in Laser Surface Structuring of Alumina.” Journal of Materials Processing Technology 203: 498–504.
- Shaji, S., and V. Radhakrishnan. 2003. “Analysis of Process Parameters in Surface Grinding with Graphite as Lubricant Based on the Taguchi Method.” Journal of Materials Processing Technology 141: 51–59.10.1016/S0924-0136(02)01112-3
- Song, B., N. Shujuan Dong, N. Sihao Deng, H. Liao, and C. Coddet. 1995. “Microstructure and Tensile Properties of Iron Parts Fabricated by Selective Laser Melting.” Optics & Laser Technology 56: 451–460.
- Sreeram, P. N., and D. Dutta. 1994. Determination of Optimal Orientation Based on Variable Slicing Thickness in Layered Manufacturing. Technical Report, UM-MEAM-TR-94-14. Ann Arbour, MI: Department of Mechanical Engineering, University of Michigan.
- Vijian,P., and V. P. Arunachalam. 2006. “Optimization Taguchi Analysis.” International Journal of Advanced Manufacturing Technology, 33 (11–22): 1122–1127. Vol. 47: pp.39–53.
- Wegner, Andreas, and Gerd Witt. 2012. “Correlation of Process Parameters and Part Properties in Laser Sintering using Response Surface Modeling.” Physics Procedia 39: 480–490.10.1016/j.phpro.2012.10.064
- Wu, D. H., and M. S. Chang. 2004. “Use of Taguchi Method to Develop a Robust Design for the Magnesium Alloy Die Casting Process.” Materials Science and Engineering A 379 (1): 366–371.10.1016/j.msea.2004.03.006