Acoustic emission analysis for characterisation of damage mechanisms in glass fiber reinforced polyester composite

References

• Awerbuch, Jonathan, Frank A. Leone, Didem Ozevin, and Tein-Min Tan. 2016. “On the Applicability of Acoustic Emission to Identify Modes of Damage in Full-scale Composite Fuselage Structures.” Journal of Composite Materials 50 (4): 447–469.10.1177/0021998315576379
   Web of Science ®Google Scholar
• Bar, H. N., M. R. Bhat, and C. R. L. Murthy. 2004. “Identification of Failure Modes in GFRP Using PVDF Sensors: ANN Approach.” Composite Structures 65 (2): 231–237.10.1016/j.compstruct.2003.10.019
   Web of Science ®Google Scholar
• Barber, Gary. 2006. “An Overview of NDT Technologies and Systems.” In Asia-Pacific Conference on NDT, 5th. Auckland, New Zealand.
   Google Scholar
• Barre, S., and M. L. Benzeggagh. 1994. “On the Use of Acoustic Emission to Investigate Damage Mechanisms in Glass-fiber-reinforced Polypropylene.” Composites Science and Technology 52 (3): 369–376.10.1016/0266-3538(94)90171-6
   Web of Science ®Google Scholar
• Bhat, C., M. M. Bhat, and C. Murthy. 2003. “Acoustic Emission Characterization of Failure Modes in Composites with ANN.” Composite Structures 61 (3): 213–220.
   Web of Science ®Google Scholar
• Bohse, J. 2000. “Acoustic Emission Characteristics of Micro-failure Processes in Polymer Blends and Composites.” Composites Science and Technology 60 (8): 1213–1226.10.1016/S0266-3538(00)00060-9
   Web of Science ®Google Scholar
• Gholizadeh, S., Z. Leman, and B. T. H. T. Baharudin. 2015. “A Review of the Application of Acoustic Emission Technique in Engineering.” Structural Engineering and Mechanics 54 (6): 1075.10.12989/sem.2015.54.6.1075
   Web of Science ®Google Scholar
• Godin, Nathalie, Stéphane Huguet, Roger Gaertner, and L. Salmon. 2004. “Clustering of Acoustic Emission Signals Collected during Tensile Tests on Unidirectional Glass/Polyester Composite Using Supervised and Unsupervised Classifiers.” NDT & E International 37 (4): 253–264.10.1016/j.ndteint.2003.09.010
   Web of Science ®Google Scholar
• Gostautas, R., G. Ramirez, R. Peterman, and D. Meggers. 2005. “Acoustic Emission Monitoring and Analysis of Glass Fiber-reinforced Composites Bridge Decks.” Journal of Bridge Engineering 10 (6): 713–721.10.1061/(ASCE)1084-0702(2005)10:6(713)
   Web of Science ®Google Scholar
• Huguet, Stéphane, Nathalie Godin, Roger Gaertner, L. Salmon, and D. Villard. 2002. “Use of Acoustic Emission to Identify Damage Modes in Glass Fiber Reinforced Polyester.” Composites Science and Technology 62 (10): 1433–1444.10.1016/S0266-3538(02)00087-8
   Web of Science ®Google Scholar
• Kaphle, Manindra R. 2012. “Analysis of Acoustic Emission Data for Accurate Damage Assessment for Structural Health Monitoring Applications.” PhD Thesis, Queensland University of Technology.
   Google Scholar
• Kotsikos, G., J. T. Evans, A. G. Gibson, and J. M. Hale. 2000. “Environmentally Enhanced Fatigue Damage in Glass Fiber Reinforced Composites Characterised by Acoustic Emission.” Composites Part A: Applied Science and Manufacturing 31 (9): 969–977.10.1016/S1359-835X(00)00014-2
   Web of Science ®Google Scholar
• Loutas, T. H., and V. Kostopoulos. 2009. “Health Monitoring of Carbon/Carbon, Woven Reinforced Composites. Damage Assessment by Using Advanced Signal Processing Techniques. Part I: Acoustic Emission Monitoring and Damage Mechanisms Evolution.” Composites Science and Technology 69 (2): 265–272.10.1016/j.compscitech.2008.07.020
   Web of Science ®Google Scholar
• Mendoza, Edgar, John Prohaska, Connie Kempen, Yan Esterkin, and Sunjian Sun. 2013. “In-flight Fiber Optic Acoustic Emission Sensor (FAESense) System for the Real Time Detection, Localization, and Classification of Damage in Composite Aircraft Structures.” Proceeding SPIE 8720, Photonic Applications for Aerospace, Commercial, and Harsh Environments IV, 87200K (May 31, 2013); doi:10.1117/12.2018155.
   Google Scholar
• Mendoza, Edgar, John Prohaska, Connie Kempen, Yan Esterkin, Sunjian Sun, and Sridhar Krishnaswamy. 2014. “Fiber Optic System for the Real Time Detection, Localization, and Classification of Damage in Composite Aircraft Structures.” 23rd International Conference on Optical Fiber Sensors - Santander, Spain, ISBN (Print) 9781628411751, Vol. 9157, 6/2014.
   Google Scholar
• Mohammad, M., S. Abdullah, N. Jamaludin, and O. Innayatullah. 2014. “Predicting the Fatigue Life of the SAE 1045 Steel Using an Empirical Weibull-based Model Associated to Acoustic Emission Parameters.” Materials & Design 54: 1039–1048. doi:10.1016/j.matdes.2013.09.021.
   Web of Science ®Google Scholar
• Mohammed, Bizuayehu Y., Chee K. Tan, Steven J. Wilcox, and Alex Z. S. Chong. 2013. “Damage Characterisation of Carbon Fiber Reinforced Composite Plate Using Acoustic Emission.” Key Engineering Materials 558:184–194, Trans Tech Publication Switzerland, June 2013, doi: 10.4028/www.scientific.net/KEM.558.184
   Google Scholar
• Mouritz, AP. 2003. “Non-destructive Evaluation of Damage Accumulation.” In Fatigue in Composites edited by Bryan Harris, 242–266. Cambridge: Woodhead Publishing Ltd.
   Google Scholar
• Nicolas, Matthew, Rani Sullivan, and W. Richards. 2016. “Large Scale Applications Using FBG Sensors: Determination of In-flight Loads and Shape of a Composite Aircraft Wing.” Aerospace 3 (3): 18; doi: 10.3390/aerospace303001810.3390/aerospace3030018
   Web of Science ®Google Scholar
• Ono, Kanji. 1988. “Acoustic Emission Behavior of Flawed Unidirectional Carbon Fiber-epoxy Composites.” Journal of Reinforced Plastics and Composites 7 (1): 90–105.10.1177/073168448800700106
   Web of Science ®Google Scholar
• Paipetis, A. S., and D. G. Aggelis. 2012. Damage Assessment in Fibrous Composites Using Acoustic Emission. InTech. Open Access Publisher, ISBN: 9535100564, 9789535100560.
   Google Scholar
• Philippidis, T. P., V. N. Nikolaidis, and A. A. Anastassopoulos. 1998. “Damage Characterization of Carbon/Carbon Laminates Using Neural Network Techniques on AE Signals.” NDT & E International 31 (5): 329–340.10.1016/S0963-8695(98)00015-2
   Web of Science ®Google Scholar
• Philippidis, T. P., V. N. Nikolaidis, and J. G. Kolaxis. 1999. “Unsupervised Pattern Recognition Techniques for the Prediction of Composite Failure.” Journal of Acoustic Emission 17 (1–2): 69–81.
   Google Scholar
• Ramirez-Jimenez, C. R., N. Papadakis, N. Reynolds, T. H. Gan, P. Purnell, and M. Pharaoh. 2004. “Identification of Failure Modes in Glass/Polypropylene Composites by Means of the Primary Frequency Content of the Acoustic Emission Event.” Composites Science and Technology 64 (12): 1819–1827. doi:10.1016/j.compscitech.2004.01.008.
   Web of Science ®Google Scholar
• Ségard, E., S. Benmedakhene, A. Laksimi, and D Laı̈. 2003. “Damage Analysis and the Fiber–Matrix Effect in Polypropylene Reinforced by Short Glass Fibers above Glass Transition Temperature.” Composite Structures 60 (1): 67–72.10.1016/S0263-8223(02)00294-5
   Web of Science ®Google Scholar
• Siron, Olivier, and Hiroshi Tsuda. 2000. “Acoustic Emission in Carbon Fiber-reinforced Plastic Materials.” Paper read at Annales de Chimie Science des Materiaux 25 (7): 533–537. Japan.
   Google Scholar
• Ullmann, Thomas, Thomas Schmidt, Severin Hofmann, and Raouf Jemmali. 2010. “In-Line Quality Assurance for the Manufacturing of Carbon Fiber Reinforced Aircraft Structures.” DGZfP-Proceedings BB 124-CD, 124. DGZfP. 2nd International Symposium on NDT in Aerospace, Hamburg. ISBN 978-3-940283-28-3.
   Google Scholar
• Wevers, M. 1997. “Listening to the Sound of Materials: Acoustic Emission for the Analysis of Material Behaviour.” NDT & E International 30 (2): 99–106. doi:10.1016/S0963-8695(96)00051-5.
   Web of Science ®Google Scholar