Modeling and optimization of high-grade compacted graphite iron milling force and surface roughness via response surface methodology

References

• Alves, S. M., R. B. Schroeter, and J. C. D. S. Bossardi. 2011. “Influence of EP Additive on Tool Wear in Drilling of Compacted Graphite Iron.” Journal of the Brazilian Society of Mechanical Sciences & Engineering 33 (2): 197–202.10.1590/S1678-58782011000200011
   Web of Science ®Google Scholar
• Aouici, H., M. A. Yallese, K. Chaoui, T. Mabrouki, and J. F. Rigal. 2012. “Analysis of Surface Roughness and Cutting Force Components in Hard Turning with CBN Tool: Prediction Model and Cutting Conditions Optimization.” Measurement 45 (3): 344–353.10.1016/j.measurement.2011.11.011
   Web of Science ®Google Scholar
• Bahurdin, M. M., B. T. H. T. Baharudin, N. Ismail, and Y. Kadikon. 2013. “Optimization of Surface Roughness of Spheroidal Graphite Cast Iron in Face Milling Operation Using Taguchi Method.” Paper Present at the Science & Engineering Technology National Conference, UniKL MFI, November 19.
   Google Scholar
• Camposeco-Negrete, C. 2013. “Optimization of Cutting Parameters for Minimizing Energy Consumption in Turning of AISI 6061 T6 Using Taguchi Methodology and ANOVA.” Journal of Cleaner Production 53 (16): 195–203.10.1016/j.jclepro.2013.03.049
   Google Scholar
• Gastel, M., U. Reuter, H. Schulz, and H. M. Ortner. 1999. “SIMS Analysis of the Wear of Boron Nitride Tools for the Machining of Compacted Graphite Iron and Grey Cast Iron.” Fresenius’ Journal of Analytical Chemistry 365 (1–3): 142–146.10.1007/s002160051460
   Google Scholar
• Gastel, M., C. Konetschny, U. Reuter, C. Fasel, H. Schulz, R. Riedel, and H. M. Ortner. 2000. “Investigation of the Wear Mechanism of Cubic Boron Nitride Tools Used for the Machining of Compacted Graphite Iron and Grey Cast Iron.” International Journal of Refractory Metals & Hard Materials 18 (6): 287–296.10.1016/S0263-4368(00)00032-9
   Web of Science ®Google Scholar
• Guo, Y., J. B. Mann, H. Yeung, and S. Chandrasekar. 2012. “Enhancing Tool Life in High-speed Machining of Compacted Graphite Iron (CGI) Using Controlled Modulation.” Tribology Letters 47 (1): 103–111.10.1007/s11249-012-9966-z
   Web of Science ®Google Scholar
• Heck, M., H. M. Ortner, S. Flege, U. Reuter, and W. Ensinger. 2008. “Analytical Investigations concerning the Wear Behaviour of Cutting Tools Used for the Machining of Compacted Graphite Iron and Grey Cast Iron.” International Journal of Refractory Metals & Hard Materials 26 (3): 197–206.10.1016/j.ijrmhm.2007.05.003
   Web of Science ®Google Scholar
• Jaharah, A. G., C. H. Che Hassan, M. J. Ghazali, A. B. Sulong, M. Z. Omar, M. Z. Nuawi, and A. R. Ismail. 2009. “Performance of Uncoated Carbide Cutting Tool when Machining Cast Iron in Dry Cutting Condition.” International Journal of Modern Physics B 23 (6): 1796–1802.10.1142/S0217979209061640
   Web of Science ®Google Scholar
• Liu, C., and Y. Wang. 2010. “Cutting Tool and Cutting Parameter Optimization Path for Difficult-to-machine Material in Aviation Industry.” Aeronautical Manufacturing Technology 15: 40–43.
   Google Scholar
• Liu, S. Q., Y. Chen, Y. C. Fu, and A. D. Hu. 2016. “Study on the Cutting Force and Machined Surface Quality of Milling AFRP.” Materials Science Forum 836–837: 155–160.10.4028/www.scientific.net/MSF.836-837
   Google Scholar
• Loftus, M. 2007. “The Influence of Cutting Force on Surface Machining Quality.” International Journal of Production Research 45 (4): 899–911.
   Web of Science ®Google Scholar
• Mandal, N., B. Doloi, and B. Mondal. 2012. “Force Prediction Model of Zirconia Toughened Alumina (ZTA) Inserts in Hard Turning of AISI 4340 Steel Using Response Surface Methodology.” International Journal of Precision Engineering and Manufacturing 13 (9): 1589–1599.10.1007/s12541-012-0209-x
   Web of Science ®Google Scholar
• Nayyar, V., J. Kaminski, A. Kinnander, and L. Nyborg. 2012. “An Experimental Investigation of Machinability of Graphitic Cast Iron Grades; Flake, Compacted and Spheroidal Graphite Iron in Continuous Machining Operations.” ProcediaCirp 1 (7): 488–493.
   Google Scholar
• Nayyar, V., G. Grenmyr, J. Kaminski, and Lars Nyborg. 2013. “Machinability of Compacted Graphite Iron (CGI) and Flake Graphite Iron (FGI) with Coated Carbide.” International Journal of Machining & Machinability of Materials 13 (1): 67–90.10.1504/IJMMM.2013.051909
   Google Scholar
• Pan, Y., X. Ai, Z. Tang, and J. Zhao. 2008. “Optimization of Tool Geometry and Cutting Parameters Based on a Predictive Model of Cutting Force.” China Mechanical Engineering 19 (4): 428–431.
   Google Scholar
• Rosa, S. D. N., A. E. Diniz, C. L. F. Andrade, and W. L. Guesser. 2010. “Analysis of Tool Wear, Surface Roughness and Cutting Power in the Turning Process of Compact Graphite Irons with Different Titanium Content.” Journal of the Brazilian Society of Mechanical Sciences & Engineering 32 (3): 234–240.10.1590/S1678-58782010000300006
   Web of Science ®Google Scholar
• Sahin, Y., and A. R. Motorcu. 2005. “Surface Roughness Prediction Model in Machining of Carbon Steel by PVD Coated Cutting Tools.” American Journal of Applied Sciences 2 (6): 1109–1112.
   Google Scholar
• Shisong, Mao, Zhou Jixiang, and Chen Ying. 2004. 实验设计 [Design of experiment]. Beijing: China Statistics Press.
   Google Scholar
• Silva, M. B. D., V. T. G. Naves, J. D. B. D. Melo, C. L. F. D. Andrade, and W. L. Guesser. 2011. “Analysis of Wear of Cemented Carbide Cutting Tools during Milling Operation of Gray Iron and Compacted Graphite Iron.” Wear 271 (9–10): 2426–2432.10.1016/j.wear.2010.11.030
   Web of Science ®Google Scholar
• Skvarenina, S., and Y. C. Shin. 2006. “Laser-assisted Machining of Compacted Graphite Iron.” International Journal of Machine Tools & Manufacture 46 (1): 7–17.10.1016/j.ijmachtools.2005.04.013
   Web of Science ®Google Scholar
• Xiao, Z., X. Liao, Z. Long, and M. Li. 2016. “Effect of Cutting Parameters on Surface Roughness Using Orthogonal Array in Hard Turning of AISI 1045 Steel with YT5 Tool.” International Journal of Advanced Manufacturing Technology 1–10.
   Web of Science ®Google Scholar
• Zeng, Q. Y., K. Wu, X. F. Zheng, and M. Zhu. 2011. “Quality Inspection and Analysis of Workpiece Surface in A3 Steel Machining.” Applied Mechanics & Materials 55–57: 451–455.10.4028/www.scientific.net/AMM.55-57
   Google Scholar