Tribological studies of reactive magnetron sputtered titanium aluminium nitride (TiAlN) coatings

References

• Andersen, K. N., E. J. Bienk, K. O. Schweitz, H. Reitz, J. Chevallier, P. Kringhøj, and J. Bøttiger. 2000. “Deposition, Microstructure and Mechanical and Tribological Properties of Magnetron Sputtered TiN/TiAlN Multilayers.” Surface and Coatings Technology 123: 219–226.10.1016/S0257-8972(99)00473-9
   Web of Science ®Google Scholar
• Birol, Yucel. 2013. “Sliding Wear of CrN, AlCrN and AlTiN Coated AISI H13 Hot Work Tool Steels in Aluminium Extrusion.” Tribology International 57: 101–106.10.1016/j.triboint.2012.07.023
   Web of Science ®Google Scholar
• Bobzin, K., E. Lugscheider, M. Maes, P. Immich, and S. Bolz. 2007. “Grain Size Evaluation of Pulsed TiAlN Nanocomposite Coatings for Cutting Tools.” Thin Solid Films 515: 3681–3684.10.1016/j.tsf.2006.11.002
   Web of Science ®Google Scholar
• Braic, V., C. N. Zoita, M. Balaceanu, A. Kiss, A. Vladescu, and A. Popescu. 2010. “TiAlN/TiAlZrN Multilayered Hard Coatings for Enhanced Performance of HSS Drilling Tools.” Surface and Coatings Technology 204: 1925–1928.10.1016/j.surfcoat.2009.08.011
   Web of Science ®Google Scholar
• Chowdhury, M. A., D. M. Nuruzzaman, B. K. Roy, S. Samad, R. Sarker, and A. H. M. Rezwan. 2013. “Experimental Investigation of Friction Coefficient and Wear Rate of Composite Materials Sliding against Smooth and Rough Mild Steel Counterfaces.” Tribology in Industry 35: 286–296.
   Google Scholar
• Fox-Rabinovich, G. S., B. D. Beake, J. L. Endrino, S. C. Veldhuis, R. Parkinson, and L. S. Shuster. 2006. “Effect of Mechanical Properties Measured at Room and Elevated Temperatures on the Wear Resistance of Cutting Tools with TiAlN and AlCrN Coatings.” Surface and Coatings Technology 200: 5738–5742.10.1016/j.surfcoat.2005.08.132
   Web of Science ®Google Scholar
• Grzesik, W., Z. Zalisz, S. Krol, and P. Nieslony. 2006. “Investigations on Friction and Wear Mechanisms of the PVD-TiAlN Coated Carbide in Dry Sliding against Steels and Cast Iron.” Wear 261: 1191–1200.10.1016/j.wear.2006.03.004
   Web of Science ®Google Scholar
• Ipaz, L., J. C. Caicedo, J. Esteve, F. J. Espinoza-Beltran, and G. Zambrano. 2012. “Improvement of Mechanical and Tribological Properties in Steel Surfaces by Using Titanium–Aluminum/Titanium–Aluminum Nitride Multilayered System.” Applied Surface Science 258: 3805–3814.10.1016/j.apsusc.2011.12.033
   Web of Science ®Google Scholar
• Jung, Duck Hyeong, Kyoung Il Moon, Seung Yong Shin, and Caroline Sunyong Lee. 2013. “Influence of Ternary Elements (X=Si, B, Cr) on TiAlN Coating Deposited by Magnetron Sputtering Process with Single Alloying Targets.” Thin Solid Films 546: 242–245.10.1016/j.tsf.2013.05.046
   Web of Science ®Google Scholar
• Khrais, S. K., and Y. J. Lin. 2007. “Wear Mechanisms and Tool Performance of TiAlN PVD Coated Inserts during Machining of AISI 4140 Steel.” Wear 262: 64–69.10.1016/j.wear.2006.03.052
   Web of Science ®Google Scholar
• Knotek, O., and T. Leyendecker. 1987. “On the Structure of (Ti, Al)N-PVD Coatings.” Journal of Solid State Chemistry 70: 318–322.10.1016/0022-4596(87)90071-5
   Web of Science ®Google Scholar
• König, W., and D. Kammermeier. 1992. “New Ways towards Better Exploitation of Physical Vapour Deposition Coatings.” Surface and Coatings Technology 470–475.10.1016/S0257-8972(07)80068-5
   Google Scholar
• Leyland, A., AND A. Matthews. 2000. “On the Significance of the H/E Ratio in Wear Control: A Nanocomposite Coating Approach to Optimised Tribological Behaviour.” Wear 246: 1–11.10.1016/S0043-1648(00)00488-9
   Web of Science ®Google Scholar
• Luo, Q. 2011. “Temperature Dependent Friction and Wear of Magnetron Sputtered Coating TiAlN/VN.” Wear 271: 2058–2066.10.1016/j.wear.2011.01.054
   Web of Science ®Google Scholar
• Nishat, Arshi, Junqing Lu, Yun Kon Joo, Chan Gyu Lee, Jae Hong Yoon, and Faheem Ahmed. 2012. “Study on Structural, Morphological and Electrical Properties of Sputtered Titanium Nitride Films under Different Argon Gas Flow.” Materials Chemistry and Physics 134: 839–844.10.1016/j.matchemphys.2012.03.078
   Web of Science ®Google Scholar
• Novak, R., and T. Polcar. 2014. “Tribological Analysis of Thin Films by Pin-On-Disc: Evaluation of Friction and Wear Measurement Uncertainty.” Tribology International 74: 154–163.
   Web of Science ®Google Scholar
• Ramadoss, Radhika, N. Kumar, R. Pandian, S. Dash, T. R. Ravindran, D. Arivuoli, and A. K. Tyagi. 2013. “Tribological Properties and Deformation Mechanism of TiAlN Coating Sliding with Various Counterbodies.” Tribology International 66: 143–149.10.1016/j.triboint.2013.05.001
   Web of Science ®Google Scholar
• Shum, P. W., W. C. Tam, K. Y. Li, Z. F. Zhou, and Y. G. Shen. 2007. “Mechanical and Tribological Properties of Titanium–Aluminium–Nitride films Deposited by Reactive Close-field Unbalanced Magnetron Sputtering.” Wear 257: 1030–1040.
   Google Scholar
• Singh, K., P. K. Limaye, N. L. Soni, A. K. Grover, R. G. Agrawal, and A. K. Suri. 2005. “Wear Studies of (Ti–Al)N Coatings Deposited by Reactive Magnetron Sputtering.” Wear 258: 1813–1824.10.1016/j.wear.2004.12.023
   Web of Science ®Google Scholar
• Tillmann, Wolfgang, Siavash Momeni, and Fabian Hoffmann. 2013. “A Study of Mechanical and Tribological Properties of Self-Lubricating TiAlVN Coatings at Elevated Temperatures.” Tribology International 66: 324–329.10.1016/j.triboint.2013.06.007
   Web of Science ®Google Scholar
• Tsui, T. Y., G. M. Pharr, W. C. Oliver, C. S. Bhatia, R. L. White, S. Anders, A. Anders, and I. G. Brown. 1995. “Nanoindentation and Nanoscratching of Hard Carbon Coatings for Magnetic Disks.” MRS Proceedings 383: 447.10.1557/PROC-383-447
   Google Scholar
• Zhao, S. S., H. Du, J. D. Zheng, Y. Yang, W. Wang, J. Gong, and C. Sun. 2008. “​Deposition of Thick TiAlN Coatings on 2024 Al/SiCp Substrate by Arc Ion Plating”. ​Surface & Coatings Technology 202: 5170–5174.
   Google Scholar