References
- Balli, S. S., and S. Chand. 2002. “Five-bar Motion and Path Generators with Variable Topology for Motion between Extreme Positions.” Mechanism and Machine Theory 37: 1435–1445.10.1016/S0094-114X(02)00064-2
- Balli, S. S., and S. Chand. 2003. “Synthesis of a Planar Seven-link Mechanism with Variable Topology for Motion between Two Dead-center Positions.” Mechanism and Machine Theory 38: 1271–1287. doi:10.1016/S0094-114X(03)00077-6.
- Balli, S. S., and S. Chand. 2004. “Synthesis of a Five-bar Mechanism of Variable Topology Type with Transmission Angle Control.” Journal of Mechanical Design 126: 128–134. doi:10.1115/1.1637660.
- Daivagna, U. M., and S. S. Balli. 2007. “FSP Synthesis of an off-Set Five Bar-Slider Mechanism with Variable Topology.” Proceedings 13th National Conference on Machines and Mechanisms (NaCoMM ‘07), 345–350. Bangalore.
- Daivagna, U. M., and S. S. Balli. 2010. “Synthesis of a Seven-Bar Slider Mechanism with Variable Topology for Motion between Two Dead-Center Positions.” Proceedings World Congress on Engineering (WCE ‘10), 1454–1459. London.
- Gadad, G. M., U. M. Daivagna, and S. S. Balli. 2005. “Triad and Dyad Synthesis of Planar Seven-link Mechanisms with Variable Topology.” Proceedings 12th National Conference on Machines and Mechanisms (NaCoMM ‘05), 67–73. Guwahati.
- Gadad, G. M., H. V. Ramakrishan, M. S. Srinath, and S. S. Balli. 2012. “Dyad Synthesis of Planar Seven-Link Variable Topology Mechanism for Motion between Two Dead-centre Positions.” IOSR Journal of Mechanical and Civil Engineering 3 (3): 21–29.10.9790/1684
- Kinzel, E. C., J. P. Schmiedeler, and G. R. Pennock. 2006. “Kinematic Synthesis for Finitely Separated Positions Using Geometric Constraint Programming.” Journal of Mechanical Design 128: 1070–1079. doi:10.1115/1.2216735.
- Kinzel, E. C., J. P. Schmiedeler, and G. R. Pennock. 2007. “Function Generation with Finitely Separated Precision Points Using Geometric Constraint Programming.” Journal of Mechanical Design 129: 1185–1190. doi:10.1115/1.2771575.
- Naik, D. P., and C. Amarnath. 1989. “Synthesis of Adjustable Four Bar Function Generators through Five Bar Loop Closure Equations.” Mechanism and Machine Theory 24 (6): 523–526. doi:10.1016/0094-114X(89)90009-8.
- Rawat, Y. R. 1966. “Synthesis of Variable Topology Mechanisms.” M.Tech diss., IIT Bombay, India.
- Reifschneider, L. G. 2005. “Teaching Kinematic Synthesis of Linkages without Complex Mathematics.” Journal of Industrial Technology 21 (4): 1–16.
- Sandoor, G. N., and A. G. Erdman. 1984a. Advance Mechanism Design: Analysis and Synthesis. Vol. 2. New Delhi: Prentice-Hall.
- Sandoor, G. N., and A. G. Erdman. 1984b. Mechanism Design: Analysis and Synthesis. Vol. 1. New Delhi: Prentice-Hall.
- Yan, H. S., and C. H. Kang. 2009. “Configuration Synthesis of Mechanisms with Variable Topologies.” Mechanism and Machine Theory 44 (5): 896–911. doi:10.1016/j.mechmachtheory.2008.06.006.
- Zhou, H., and K. L. Ting. 2002. “Adjustable Slider-crank Linkages for Multiple Path Generation.” Mechanism and Machine Theory 37 (5): 499–509.10.1016/S0094-114X(02)00008-3
- Zhou, H., and Edmund H. M. Cheung. 2004. “Adjustable Four-bar Linkages for Multi-phase Motion Generation.” Mechanism and Machine Theory 39: 261–279. doi:10.1016/j.mechmachtheory.2003.07.001.
- Zhou, H. 2009. “Synthesis of Adjustable Function Generation Linkages Using the Optimal Pivot Adjustment.” Mechanism and Machine Theory 44 (5): 983–990.10.1016/j.mechmachtheory.2008.05.016