Chip formation characteristics of selective laser melted Ti–6Al–4V

References

• Barry, J., G. Byrne, and D. Lennon. 2001. “Observations on Chip Formation and Acoustic Emission in Machining Ti–6Al–4V Alloy.” International Journal of Machine Tools and Manufacture 41 (7): 1055–1070. doi:10.1016/S0890-6955(00)00096-1.
   Web of Science ®Google Scholar
• Bayoumi, A. E., and J. Q. Xie. 1995. “Some Metallurgical Aspects of Chip Formation in Cutting Ti-6wt.% Al-4wt.% V Alloy.” Materials Science and Engineering: A 190 (1–2): 173–180.10.1016/0921-5093(94)09595-N
   Web of Science ®Google Scholar
• Bejjani, Roland, Marek Balazinski, Helmi Attia, Philippe Plamondon, and Gilles L’Éspérance. 2016. “Chip Formation and Microstructure Evolution in the Adiabatic Shear Band When Machining Titanium Metal Matrix Composites.” International Journal of Machine Tools and Manufacture 109: 137–146. doi:10.1016/j.ijmachtools.2016.08.001.
   Web of Science ®Google Scholar
• Bordin, A., S. Bruschi, A. Ghiotti, F. Bucciotti, and L. Facchini. 2014. “Comparison between Wrought and EBM Ti6Al4 V Machinability Characteristics .” Key Engineering Materials 611–612: 1186–1193. doi:10.4028/www.scientific.net/KEM.611-612.1186.
   Google Scholar
• Bordin, A., S. Bruschi, A. Ghiotti, and P. F. Bariani. 2015. “Analysis of Tool Wear in Cryogenic Machining of Additive Manufactured Ti6Al4V Alloy.” Wear 328–329: 89–99.10.1016/j.wear.2015.01.030
   Web of Science ®Google Scholar
• Brinksmeier, E., G. Levy, D. Meyer, and A. B. Spierings. 2010. “Surface Integrity of Selective-laser-Melted Components.” CIRP Annals – Manufacturing Technology 59 (1): 601–606. doi:10.1016/j.cirp.2010.03.131.
   Web of Science ®Google Scholar
• Bruschi, S., G. Tristo, Z. Rysava, P. F. Bariani, D. Umbrello, and L. De Chiffre. 2016. “Environmentally Clean Micromilling of Electron Beam Melted Ti6Al4V.” Journal of Cleaner Production 133: 932–941. doi:10.1016/j.jclepro.2016.06.035.
   Web of Science ®Google Scholar
• Cedergren, S., G. Petti, and G. Sjöberg. 2013. “On the Influence of Work Material Microstructure on Chip Formation, Cutting Forces and Acoustic Emission When Machining Ti–6Al–4V.” Procedia CIRP 12: 55–60. doi:10.1016/j.procir.2013.09.011.
   Google Scholar
• Cedergren, Stefan, Constantinos Frangoudis, Andreas Archenti, Robert Pederson, and Göran Sjöberg. 2016. “Influence of Work Material Microstructure on Vibrations When Machining Cast Ti–6Al–4V.” The International Journal of Advanced Manufacturing Technology 84 (9–12): 2277–2291. doi:10.1007/s00170-015-7827-2.
   Web of Science ®Google Scholar
• Childs, Thomas. 2000. Metal Machining: Theory and Applications. Butterworth-Heinemann.
   Google Scholar
• Cotterell, Matthew, and Gerry Byrne. 2008. “Characterisation of Chip Formation during Orthogonal Cutting of Titanium Alloy Ti–6Al–4V.” CIRP Journal of Manufacturing Science and Technology 1 (2): 81–85. doi:10.1016/j.cirpj.2008.09.017.
   Google Scholar
• DMG MORI, ed. 2014. Additive Manufacturing in Milling Quality.
   Google Scholar
• Fu, Xuesong, Guoqing Chen, Qi Yang, Zhonggang Sun, and Wenlong Zhou. 2016. “The Influence of Hydrogen on Chip Formation in Cutting Ti–6Al–4V Alloys.” The International Journal of Advanced Manufacturing Technology 89: 1–5. doi: 10.1007/s00170-016-9100-8.
   Web of Science ®Google Scholar
• Griffiths, B. J. 1986. “The Development of a Quick-stop Device for Use in Metal Cutting Hole Manufacturing Processes.” International Journal of Machine Tool Design and Research 26 (2): 191–203. doi:10.1016/0020-7357(86)90219-2.
   Web of Science ®Google Scholar
• Joshi, Shashikant, Pravin Pawar, Asim Tewari, and Suhas S. Joshi. 2014a. “Effect of β Phase Fraction in Titanium Alloys on Chip Segmentation in Their Orthogonal Machining.” CIRP Journal of Manufacturing Science and Technology 7 (3): 191–201. doi:10.1016/j.cirpj.2014.03.001.
   Google Scholar
• Joshi, Shashikant, Pravin Pawar, Asim Tewari, and Suhas S. Joshi. 2014b. “Influence of β Phase Fraction on Deformation of Grains in and around Shear Bands in Machining of Titanium Alloys.” Materials Science and Engineering: A 618: 71–85. doi:10.1016/j.msea.2014.08.076.
   Web of Science ®Google Scholar
• Komanduri, R. 1982. “Some Clarifications on the Mechanics of Chip Formation When Machining Titanium Alloys.” Wear 76 (1): 15–34. doi:10.1016/0043-1648(82)90113-2.
   Web of Science ®Google Scholar
• Komanduri, R., and B. F. Von Turkovich. 1981. “New Observations on the Mechanism of Chip Formation When Machining Titanium Alloys.” Wear 69 (2): 179–188. doi:10.1016/0043-1648(81)90242-8.
   Web of Science ®Google Scholar
• Leyens, C., and M. Peters. 2003. Titanium and Titanium Alloys: Fundamentals and Applications. Weinheim:  Wiley.10.1002/3527602119
   Google Scholar
• Li, Anhai, Jun Zhao, Yonghui Zhou, Xiaoxiao Chen, and Dong Wang. 2012. “Experimental Investigation on Chip Morphologies in High-speed Dry Milling of Titanium Alloy Ti–6Al–4V.” The International Journal of Advanced Manufacturing Technology 62 (9–12): 933–942. doi:10.1007/s00170-011-3854-9.
   Web of Science ®Google Scholar
• Molinari, A., C. Musquar, and G. Sutter. 2002. “Adiabatic Shear Banding in High Speed Machining of Ti–6Al–4V: Experiments and Modeling.” International Journal of Plasticity 18 (4): 443–459. doi:10.1016/S0749-6419(01)00003-1.
   Web of Science ®Google Scholar
• Montevecchi, Filippo, Niccolò Grossi, Hisataka Takagi, Antonio Scippa, Hiroyuki Sasahara, and Gianni Campatelli. 2016. “Cutting Forces Analysis in Additive Manufactured AISI H13 Alloy.” Procedia CIRP 46: 476–479. doi:10.1016/j.procir.2016.04.034.
   Google Scholar
• Murr, L. E., S. A. Quinones, S. M. Gaytan, M. I. Lopez, A. Rodela, E. Y. Martinez, D. H. Hernandez, E. Martinez, F. Medina, and R. B. Wicker. 2009. “Microstructure and Mechanical Behavior of Ti–6Al–4V Produced by Rapid-layer Manufacturing, for Biomedical Applications.” Journal of the Mechanical Behavior of Biomedical Materials 2 (1): 20–32. doi:10.1016/j.jmbbm.2008.05.004.
   PubMed Web of Science ®Google Scholar
• Nakayama, Kazuo, Minoru Arai, and Torahiko Kanda. 1988. “Machining Characteristics of Hard Materials.” CIRP Annals – Manufacturing Technology 37 (1): 89–92. doi:10.1016/S0007-8506(07)61592-3.
   Google Scholar
• Nomani, J., A. Pramanik, T. Hilditch, and G. Littlefair. 2015. “Chip Formation Mechanism and Machinability of Wrought Duplex Stainless Steel Alloys.” The International Journal of Advanced Manufacturing Technology 80 (5–8): 1127–1135. doi:10.1007/s00170-015-7113-3.
   Web of Science ®Google Scholar
• Oliaei, Samad Nadimi Bavil, and Yiğit Karpat. 2016. “Investigating the Influence of Built-up Edge on Forces and Surface Roughness in Micro Scale Orthogonal Machining of Titanium Alloy Ti6Al4V.” Journal of Materials Processing Technology 235: 28–40. doi:10.1016/j.jmatprotec.2016.04.010.
   Web of Science ®Google Scholar
• Oyelola, Olusola, Peter Crawforth, Rachid M’Saoubi, and Adam T. Clare. 2016. “Machining of Additively Manufactured Parts: Implications for Surface Integrity.” Procedia CIRP 45: 119–122. doi:10.1016/j.procir.2016.02.066.
   Google Scholar
• Puerta Velásquez, J. D., B. Bolle, P. Chevrier, G. Geandier, and A. Tidu. 2007. “Metallurgical Study on Chips Obtained by High Speed Machining of a Ti–6Al–4V Alloy.” Materials Science and Engineering: A 452–453: 469–474. doi:10.1016/j.msea.2006.10.090.
   Web of Science ®Google Scholar
• Ramalingam, S., and J. T. Black. 1973. “An Electron Microscopy Study of Chip Formation.” Metallurgical Transactions 4 (4): 1103–1112. doi:10.1007/bf02645614. https://link.springer.com/article/10.1007/BF02645614.
   Web of Science ®Google Scholar
• Recht, R. F. 1964. “Catastrophic Thermoplastic Shear.” Journal of Applied Mechanics 31 (2): 189–193. doi:10.1115/1.3629585.
   Google Scholar
• Roberts, I. A., C. J. Wang, R. Esterlein, M. Stanford, and D. J. Mynors. 2009. “A Three-dimensional Finite Element Analysis of the Temperature Field during Laser Melting of Metal Powders in Additive Layer Manufacturing.” International Journal of Machine Tools and Manufacture 49 (12–13): 916–923. doi:10.1016/j.ijmachtools.2009.07.004.
   Web of Science ®Google Scholar
• Seagle, S. R., K. O. Yu, and S. Giangiordano. 1999. “Considerations in Processing Titanium.” Materials Science and Engineering: A 263 (2): 237–242. doi:10.1016/S0921-5093(98)01154-X.
   Web of Science ®Google Scholar
• Shaw, Milton C, and J. O. Cookson. 1985. Metal Cutting Principles. Elsevier.
   Google Scholar
• Sheikh-Ahmad, J., and J. A. Bailey. 1997. “Flow Instability in the Orthogonal Machining of CP Titanium.” Journal of Manufacturing Science and Engineering 119 (3): 307–313. doi:10.1115/1.2831108.
   Web of Science ®Google Scholar
• Shivpuri, R., J. Hua, P. Mittal, A. K. Srivastava, and G. D. Lahoti. 2002. “Microstructure-mechanics Interactions in Modeling Chip Segmentation during Titanium Machining.” CIRP Annals – Manufacturing Technology 51 (1): 71–74. doi:10.1016/S0007-8506(07)61468-1.
   Web of Science ®Google Scholar
• Shunmugavel, Manikandakumar, Ashwin Polishetty, and Guy Littlefair. 2015. “Microstructure and Mechanical Properties of Wrought and Additive Manufactured Ti–6Al–4V Cylindrical Bars.” Procedia Technology 20: 231–236.10.1016/j.protcy.2015.07.037
   Google Scholar
• Shunmugavel, Manikandakumar, Ashwin Polishetty, Moshe Goldberg, Rajkumar Prasad Singh, and Guy Littlefair. 2016. “Tool Wear and Surface Integrity Analysis of Machined Heat Treated Selective Laser Melted Ti–6Al–4V.” International Journal of Materials Forming and Machining Processes 3 (2): 50–63.10.4018/IJMFMP
   Google Scholar
• Shunmugavel, Manikandakumar, Ashwin Polishetty, Junior Nomani, Moshe Goldberg, and Guy Littlefair. 2016. “Metallurgical and Machinability Characteristics of Wrought and Selective Laser Melted Ti–6Al–4V.” Journal of Metallurgy 2016: 10. doi:10.1155/2016/7407918.
   Google Scholar
• Simonelli, M., Y. Y. Tse, and C. Tuck. 2014. “Effect of the Build Orientation on the Mechanical Properties and Fracture Modes of SLM Ti–6Al–4V.” Materials Science and Engineering: A 616: 1–11. doi:10.1016/j.msea.2014.07.086.
   Web of Science ®Google Scholar
• Sun, J., and Y. B. Guo. 2009. “A Comprehensive Experimental Study on Surface Integrity by End Milling Ti–6Al–4V.” Journal of Materials Processing Technology 209 (8): 4036–4042. doi:10.1016/j.jmatprotec.2008.09.022.
   Web of Science ®Google Scholar
• Sun, S., M. Brandt, and M. S. Dargusch. 2009. “Characteristics of Cutting Forces and Chip Formation in Machining of Titanium Alloys.” International Journal of Machine Tools and Manufacture 49 (7–8): 561–568. doi:10.1016/j.ijmachtools.2009.02.008.
   Web of Science ®Google Scholar
• Sun, Shou Jin, Milan Brandt, and John Mo. 2013. “Effect of Microstructure on Cutting Force and Chip Formation during Machining of Ti–6Al–4V Alloy.” Advanced Materials Research 690–693: 2437–2441. doi:10.4028/www.scientific.net/AMR.690-693.2437.
   Google Scholar
• Trent, Edward Moor, and Paul Kenneth Wright. 2000. Metal Cutting. Boston: Butterworth-Heinemann.
   Google Scholar
• Turley, D. M., E. D. Doyle, and S. Ramalingam. 1982. “Calculation of Shear Strains in Chip Formation in Titanium.” Materials Science and Engineering 55 (1): 45–48.10.1016/0025-5416(82)90082-9
   Google Scholar
• Vyas, A., and M. C. Shaw. 1999. “Mechanics of Saw-tooth Chip Formation in Metal Cutting.” Journal of Manufacturing Science and Engineering 121 (2): 163–172. doi:10.1115/1.2831200. http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1434573.
   Web of Science ®Google Scholar
• Wan, Z. P., Y. E. Zhu, H. W. Liu, and Y. Tang. 2012. “Microstructure Evolution of Adiabatic Shear Bands and Mechanisms of Saw-tooth Chip Formation in Machining Ti6Al4V.” Materials Science and Engineering: A 531: 155–163. doi:10.1016/j.msea.2011.10.050.
   Web of Science ®Google Scholar
• Zhen-Bin, Hou, and Ranga Komanduri. 1995. “On a Thermomechanical Model of Shear Instability in Machining.” CIRP Annals – Manufacturing Technology 44 (1): 69–73. doi:10.1016/S0007-8506(07)62277-X.
   Google Scholar