Experimental analysis in drilling of AA 5052 using copper nanofluids under minimum quantity lubrication

References

• Abrao, A. M., M. L. H. Wise, and D. K. Aspinwall. 1995. “Tool Life and Workpiece Surface Integrity Evaluation When Machining Hardened AISI H13 Steel and AISI E52100 Steels with Conventional Ceramic and PCBN Tool Materials.” Society of Manufacturing Engineers 1: 95–159.
   Google Scholar
• Amrita, M., R. R. Srikant, and A. V. Sitaramaraju. 2014. “Performance Evaluation of Nanographite-Based Cutting Fluid in Machining Process.” Materials and Manufacturing Process 29 (5): 600–605.10.1080/10426914.2014.893060
   Web of Science ®Google Scholar
• Bhowmick, S., M. J. Lukitsch, and A. T. Alpas. 2010. “Dry and Minimum Quantity Lubrication Drilling of Cast Magnesium Alloy (AM60).” International Journal of Machine Tools and Manufacture 50 (5): 444–457.10.1016/j.ijmachtools.2010.02.001
   Web of Science ®Google Scholar
• Dhananchezian, M., and M. Pradeep Kumar. 2011. “Cryogenic Turning of the Ti–6Al–4 V Alloy with Modified Cutting Tool Inserts.” Cryogenics 51 (1): 34–40.10.1016/j.cryogenics.2010.10.011
   Web of Science ®Google Scholar
• Dhar, N. R., M. W. Islam, S. Islam, and M. A. H. Mithu. 2006. “The Influence of Minimum Quantity of Lubrication (MQL) on Cutting Temperature, Chip and Dimensional Accuracy in Turning AISI-1040 Steel.” Journal of Materials Processing Technology 171 (1): 93–99.10.1016/j.jmatprotec.2005.06.047
   Web of Science ®Google Scholar
• Ghadami, A., M. Ehsani, and H. A. Khonakdar. 2014. “Vinyl/ Ester/Glass Flake Nanocomposites: An Overview of Physical and Chemical Properties.” Journal of Composite Materials 48 (13): 1585–1593.10.1177/0021998313488153
   Web of Science ®Google Scholar
• Ginzburg, B. M., L. A. Shibaev, O. F. Kireenko, A. A. Shepelevskii, M. V. Baidakova, and A. A. Sitnikova. 2002. “Antiwear Effect of Fullerene C60 Additives to Lubricating Oils.” Russian Journal of Applied Chemistry 75 (8): 1330–1335.10.1023/A:1020929515246
   Web of Science ®Google Scholar
• Hegab, H., U. Umer, M. Soliman, and H. A. Kishawy. 2018. “Effects of Nano-Cutting Fluids on Tool Performance and Chip Morphology during Machining Inconel 718.” International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-018-1825-0.
   Google Scholar
• Huang, W. T., D. H. Wu, and J. T. Chen. 2016. “Robust Design of Using Nanofluid/MQL in Micro-Drilling.” International Journal of Advanced Manufacturing Technology 85 (9–12): 2155–2161.10.1007/s00170-015-7382-x
   Web of Science ®Google Scholar
• Kalita, P., P. M. Ajay, J. Wenping, and J. S. Albert. 2010. “Tribological Study of Nano Lubricant Integrated Soybean Oil for Minimum Quantity Lubrication (MQL) Grinding.” Transactions NAMRI/SME 38: 137–144.
   Google Scholar
• Kamata, Y., and T. Obikawa. 2007. “High Speed MQL Finish-Turning of Inconel 718 with Different Coated Tools.” Journal of Materials Processing Technology 192 (1): 281–286.10.1016/j.jmatprotec.2007.04.052
   Google Scholar
• Khandekar, S., M. R. Sankar, V. Agnihotri, and J. Ramkumar. 2012. “Nano-Cutting Fluid for Enhancement of Metal Cutting Performance.” Materials and Manufacturing Process 27 (9): 963–967.10.1080/10426914.2011.610078
   Web of Science ®Google Scholar
• Leppert, T. 2012. “Surface Layer Properties of AISI 316L Steel When Turning under Dry and with Minimum Quantity Lubrication Conditions.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226 (4): 617–631.10.1177/0954405411429894
   Google Scholar
• Li, K. M., and S. Y. Liang. 2007. “Performance Profiling of Minimum Quantity Lubrication in Machining.” The International Journal of Advanced Manufacturing Technology 35 (3–4): 226–233.10.1007/s00170-006-0713-1
   Web of Science ®Google Scholar
• Liu, Z. Q., X. Ai, H. Zhang, Z. T. Wang, and Y. Wan. 2002. “Wear Patterns and Mechanisms of Cutting Tools in High Speed Face Milling.” Journal of Materials Processing Technology 129 (1–3): 222–226.10.1016/S0924-0136(02)00605-2
   Web of Science ®Google Scholar
• Manimaran, R., K. Palaniradja, N. Alagumurthi, S. Sendhilnathan, and J. Hussain. 2014. “Preparation and Characterization of Copper Oxide Nanofluid for Heat Transfer Applications.” Applied Nanoscience 4 (2): 163–167.10.1007/s13204-012-0184-7
   Web of Science ®Google Scholar
• Mao, C., J. Zhang, Y. Huang, H. Zou, X. Huang, and Z. Zhou. 2013. “Investigation on the Effect of Nanofluid Parameters on MQL Grinding.” Materials and Manufacturing Processes 28 (4): 436–442.10.1080/10426914.2013.763970
   Web of Science ®Google Scholar
• Murthy, K. S., and I. G. Rajendran. 2012. “Prediction and Analysis of Multiple Quality Characteristics in Drilling under Minimum Quantity Lubrication.” Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture 226 (6): 1061–1070.10.1177/0954405411435579
   Google Scholar
• Nam, J. S., P. H. Lee, and S. W. Lee. 2011. “Experimental Characterization of Micro-Drilling Process Using Nanofluid Minimum Quantity Lubrication.” International Journal of Machine Tools Manufacture 51 (7–8): 649–652.10.1016/j.ijmachtools.2011.04.005
   Web of Science ®Google Scholar
• Naresh Babu, M., and N. Muthukrishnan. 2014. “Multiresponse Analysis in Abrasive Waterjet Machining Process on AA 6351.” International Journal of Manufacturing, Materials, and Mechanical Engineering 4 (4): 38–48.
   Google Scholar
• Najiha, M. S., M. M. Rahman, and A. R. Yusoff. 2015. “Flank Wear Characterization in Aluminum Alloy (6061 T6) with Nanofluid MQL Environment Using Uncoated Carbide Tool.” Journal of Manufacturing Science and Engineering 137 (6): 1–7.
   Web of Science ®Google Scholar
• Naresh Babu, M., and N. Muthukrishnan. 2015. “Investigation of Multiple Process Parameters in Abrasive Water Jet Machining of Tiles.” Journal of the Chinese Institute of Engineers 38 (6): 692–700.10.1080/02533839.2015.1010944
   Web of Science ®Google Scholar
• Oh, S. M., and B. G. Rhee. 2001. “Effects of Tribological Characteristics on Lubricant Proper- Ties (the 2nd).” Journal of the Korean Society of Tribologists and Lubrication Engineers 17 (4): 334–340.
   Google Scholar
• Padmini, R., P. VamsiKrishna, and G. Krishna Mohana Rao. 2015. “Experimental Evaluation of Nano-Molybdenum Disulphide and Nano-Boric Acid Suspensions in Vegetable Oils as Prospective Cutting Fluids during Turning of AISI 1040 Steel.” Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology 230 (5): 493–505.
   Web of Science ®Google Scholar
• Padmini, R., P. VamsiKrishna, and G. Krishna Mohana Rao. 2016. “Effectiveness of Vegetable Oil Based Nanofluids as Potential Cutting Fluids in Turning AISI 1040 Steel.” Tribology International 94: 490–501.10.1016/j.triboint.2015.10.006
   Web of Science ®Google Scholar
• Paul, S., A. K. Singh, and A. Ghosh. 2017. “Grinding of Ti-6Al-4 V under Small Quantity Cooling Lubrication Environment Using Alumina and MWCNT Nanofluids.” Materials and Manufacturing Processes 32 (6): 608–615.10.1080/10426914.2016.1257797
   Web of Science ®Google Scholar
• Pervaiz, S., I. Deiab, and A. Rashid. 2017. “Minimal Quantity Cooling Lubrication in Turning of Ti6Al4 V: Influence on Surface Roughness, Cutting Force and Tool Wear.” Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture 231 (9): 1542–1558.10.1177/0954405415599946
   Web of Science ®Google Scholar
• Prabhu, S., and B. K. Vinayagam. 2012. “AFM Investigation in Grinding Process with Nanofluids Using Taguchi Analysis.” International Journal of Advanced Manufacturing Technology 60: 149–160.10.1007/s00170-011-3599-5
   Web of Science ®Google Scholar
• Rahim, E. A., and H. Sasahara. 2010. “Effect of MQL Liquids on Surface Integrity When High Speed Drilling Titanium Alloy.” Key Engineering Materials 443: 359–364.10.4028/www.scientific.net/KEM.443
   Google Scholar
• Rahim, E. A., and H. Sasahara. 2011. “Investigation of Tool Wear and Surface Integrity on MQL Machining of Ti-6AL-4 V Using Biodegradable Oil.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225 (9): 1505–1511.10.1177/0954405411402554
   Google Scholar
• Rahmati, B., and A. A. D Sarhan, and M. Sayuti. 2014. “Investigating the Optimum Molybdenum Disulfide (MoS2) Nanolubrication Parameters in CNC Milling of AL6061-T6 Alloy.” International Journal of Advanced Manufacturing Technology 70 (5–8): 1143–1155.10.1007/s00170-013-5334-x
   Web of Science ®Google Scholar
• Ravi, S., and M. Pradeep Kumar. 2011. “Experimental Investigations on Cryogenic Cooling by Liquid Nitrogen in the End Milling of Hardened Steel.” Cryogenics 51 (9): 509–515.10.1016/j.cryogenics.2011.06.006
   Web of Science ®Google Scholar
• Ravi, S., and M. Pradeep Kumar. 2012. “Experimental Investigation of Cryogenic Cooling in Milling of AISI D3 Tool Steel.” Materials and Manufacturing Processes 27 (10): 1017–1021.10.1080/10426914.2011.654157
   Web of Science ®Google Scholar
• Raju, R. A., A. Andhare, and N. K. Sahu. 2017. “Performance of Multi Walled Carbon Nano Tube Based Nanofluid in Turning Operation.” Materials and Manufacturing Processes 32 (13): 1490–1496.10.1080/10426914.2017.1279291
   Web of Science ®Google Scholar
• Sayuti, M., O. M. Erh, A. A. D. Sarhan, and M. Hamd. 2013. “Investigation on the Morphology of the Machined Surface in End Milling of Aerospace AL6061- T6 for Novel Uses of SiO2 Nanolubrication System.” Journal of Cleaner Production 66: 655–663.
   Web of Science ®Google Scholar
• Sayuti, M., A. A. D. Sarhan, and F. Salem. 2014. “Novel Uses of SiO2 Nano-Lubrication System in Hard Turning Process of Hardened Steel AISI4140 for Less Tool Wear, Surface Roughness and Oil Consumption.” Journal of Cleaner Production 67: 265–276.10.1016/j.jclepro.2013.12.052
   Web of Science ®Google Scholar
• Saravanakumar, N., L. Prabu, and M. Karthik. 2014. “Experimental Analysis on Cutting Fluid Dispersed with Silver Nano Particles.” Journal of Mechanical Science Technology 28 (2): 645–651.10.1007/s12206-013-1192-6
   Web of Science ®Google Scholar
• Setti, D., M. J. Sinha, S. Ghosh, and P. V. Rao. 2015. “Performance Evaluation of Ti–6Al–4 V Grinding Using Chip Formation and Coefficient of Friction under the Influence of Nanofluids.” International Journal of Machine Tools & Manufacture 88: 237–248.10.1016/j.ijmachtools.2014.10.005
   Web of Science ®Google Scholar
• Shabgard, M., M. Seyedzavvar, and M. Mohammadpourfard. 2017. “Experimental Investigation into Lubrication Properties and Mechanism of Vegetable-Based CuO Nanofluid in MQL Grinding.” International Journal of Advanced Manufacturing Technology 92 (9–12): 3807–3823. doi:10.1007/s00170-017-0319-9.
   Web of Science ®Google Scholar
• Sharma, A. K., A. K. Tiwari, and A. R. Dixit. 2015. “Improved Machining Performance with Nanoparticle Enriched Cutting Fluids under Minimum Quantity Lubrication (MQL) Technique: A Review.” Materials Today: Proceedings 2 (4–5): 3545–3551.10.1016/j.matpr.2015.07.066
   Google Scholar
• Sharma, A. K., R. K. Singh, A. R. Dixit, and A. K. Tiwari. 2017. “Novel Uses of Alumina-MoS2 Hybrid Nanoparticle Enriched Cutting Fluid in Hard Turning of AISI 304 Steel.” Journal of Manufacturing Processes 30 (1): 467–482.10.1016/j.jmapro.2017.10.016
   Google Scholar
• Shen, B., A. Shih, and S. C. Tung. 2008. “Application of Nanofluids in Minimum Quantity Lubrication Grinding.” Tribology & Lubrication Technology 51 (6): 730–737.
   Google Scholar
• Singh, R. K., A. K. Sharma, A. R. Dixit, A. Mandal, and A. K. Tiwari. 2017. “Experimental Investigation of Thermal Conductivity and Specific Heat of Nanoparticles Mixed Cutting Fluids.” Materials Today: Proceedings 4 (8): 8587–8596.10.1016/j.matpr.2017.07.206
   Google Scholar
• Sornakumar, T., and A. Senthil Kumar. 2008. “Machinability of Bronze–Alumina Composite with Tungsten Carbide Cutting Tool Inserts.” Journal of Material Processing Technology 202 (1–3): 402–405.10.1016/j.jmatprotec.2007.10.013
   Web of Science ®Google Scholar
• Srikiran, S., K. Ramji, B. Satyanarayana, and S. V. Ramana. 2013. “Investigation on Turning of AISI 1040 Steel with the Application of Nano-Crystalline Graphite Powder as Lubricant.” Proceedings of the Institution of Mechanical Engineers C – Journal of Mechanical Engineering 228 (9): 1570–1580.
   Web of Science ®Google Scholar
• Tai, H. W., Wu Der-Ho, and C. Jian-Ting. 2015. “Robust Design of Using Nanofluid/MQL in Micro-Drilling.” International Journal of Advanced Manufacturing Technology 85 (9): 2155–2161.
   Web of Science ®Google Scholar
• Vasu, V., and G. Pradeep Kumar Reddy. 2011. “Effect of Minimum Quantity Lubrication with Al2O3 Nanoparticles on Surface Roughness, Tool Wear and Temperature Dissipation in Machining Inconel 600 Alloy.” Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems 225 (1): 3–16.
   Google Scholar
• Wang, Y., J. E. Fernandez, and D. G. Cuervo. 1996. “Rolling-Contact Fatigue Lives of Steel AISI 52100 Balls with Eight Mineral and Synthetic Lubricants.” Wear 196 (1–2): 110–119.10.1016/0043-1648(95)06857-0
   Web of Science ®Google Scholar
• Zhang, Y., C. Li, D. Jia, D. Zhang, and X. Zhang. 2015. “Experimental Evaluation of MoS2 Nanoparticles in Jet MQL Grinding with Different Types of Vegetable Oil as Base Oil.” Journal of Cleaner Production 87 (1): 930–940.10.1016/j.jclepro.2014.10.027
   Google Scholar