Research on the prediction model of drilling anti-jamming valve based on GA-BPNN

References

• Adamowski, Jan, Hiu Fung Chan, Shiv O. Prasher, Bogdan Ozga-Zielinski, and Anna Sliusarieva. 2012. “Comparison of Multiple Linear and Nonlinear Regression, Autoregressive Integrated Moving Average, Artificial Neural Network, and Wavelet Artificial Neural Network Methods for Urban Water Demand Forecasting in Montreal, Canada.” Water Resources Research 48 (1): 273–279. doi:10.1029/2010WR009945.
   Google Scholar
• Ataei, Mohammad, Reza KaKaie, Mehdi Ghavidel, and Omid Saeidi. 2015. “Drilling Rate Prediction of an Open Pit Mine Using the Rock Mass Drillability Index.” International Journal of Rock Mechanics and Mining Sciences 73: 130–138. doi:10.1016/j.ijrmms.2014.08.006.
   Web of Science ®Google Scholar
• Celik, Ali N., and Tariq Muneer. 2013. “Neural Network Based Method for Conversion of Solar Radiation Data.” Energy Conversion and Management 67: 117–124. doi:10.1016/j.enconman.2012.11.010.
   Web of Science ®Google Scholar
• Ghosh, Rajib. 2017. Assessment of Rock Mass Quality and Its Effects on Chargeability Using Drill Monitoring Technique. Lulea University of Technology.
   Google Scholar
• Ghosh, Rajib, Håkan Schunnesson, and Uday Kumar. 2015. “The Use of Specific Energy in Rotary Drilling: The Effect of Operational Parameters.” International Symposium on the Application of Computers and Operations Research in the Mineral Industry, May 23–27.
   Google Scholar
• Hu, Qiong, Chunhua Yang, Hao Zheng, and Ming Chen. 2014. “Dynamic Simulation and Test Research of Impact Performance of Hydraulic Rock Drill with No Constant-pressurized Chamber.” Automation in Construction 37: 211–216. doi:10.1016/j.autcon.2013.08.011.
   Web of Science ®Google Scholar
• Jiang, Tao, Yiping You, Guangyan Xue, and Anlin Wang. 2011. “Research on the Dynamic Characteristics of Mast Mechanism of Rotary Drilling Rig.” Procedia Engineering 16: 763–771. doi:10.1016/j.proeng.2011.08.1152.
   Google Scholar
• Dai, J. C., Z. Q. Liu, X. Liu, S. Y. Yang, and X. B. Shen. 2018. “Structural Parameters Multi-objective Optimisation and Dynamic Characteristics Analysis of Largescale Wind Turbine Towers.” Australian Journal of Mechanical Engineering 16 (1): 43–49. doi:10.1080/14484846.2017.1295794.
   Web of Science ®Google Scholar
• Kartheeswaran, Subramanian. 2015. “Minimize the Mean Square Error by Data Segregation Approach for Back-propagation Artificial Neural Network with Adaptive Learning Based Image Reconstruction in Electron Magnetic Resonance Imaging Tomography.” Online International Conference on Green Engineering and Technologies, Coimbatore, India, November 27–27.
   Google Scholar
• Laaboudi, Abdelkader, Brahim Mouhouche, and Belkacem Draoui. 2012. “Neural Network Approach to Reference Evapotranspiration Modeling from Limited Climatic Data in Arid Regions.” International Journal of Biometeorology 56 (5): 831–841. doi:10.1007/s00484-011-0485-7.
   PubMed Web of Science ®Google Scholar
• Liu, Ruixin, Lu Xiaodong Zhang, Xiaojie Gao Zhang, Huiling Li, Junhan Shi, and Xuelin Li. 2014. “Bitterness Intensity Prediction of Berberine Hydrochloride Using an Electronic Tongue and a GA-BP Neural Network.” Experimental and Therapeutic Medicine 7 (6): 1696–1702. doi:10.3892/etm.2014.1614.
   PubMed Web of Science ®Google Scholar
• Luo, Sheng-mei, Hong-lin Zhang, Jian-gang Si, and Yun Long. 2009. “Control Strategy of Blockage Prevention of Hydraulic Rock Drill.” Journal of Lanzhou University of Technology 35 (3): 33–38. doi:10.13295/j.cnki.jlut.2009.03.006.
   Google Scholar
• Ma, Wei, Fei Ma, and Zhihong Zhou. 2014. “Modeling and Simulation Analysis on Anti-jamming Valve of Drill Rig Based on AMESim.” Mining and Processing Equipment 42 (11): 17–21. doi:10.16816/j.cnki.ksjx.2014.11.005.
   Google Scholar
• Jenarthanan, M. P., R. Jeyapaul, and S. Ramesh Kumar. 2017. “Comparative Analysis of Delamination Factor Prediction Using RSM and ANN during Endmilling of GFRP Composites.” Australian Journal of Mechanical Engineering 15 (2): 111–124. doi:10.1080/14484846.2015.1093682.
   Web of Science ®Google Scholar
• Jenarthanan, M. P., S. Ramesh Kumar, and R. Jeyapaul. 2016. “Modelling of Machining Force in End Milling of GFRP Composites Using MRA and ANN.” Australian Journal of Mechanical Engineering 14 (2): 104–114. doi:10.1080/14484846.2015.1093227.
   Web of Science ®Google Scholar
• Oh, J. Y., G. H. Lee, H. S. Kang, and C. S. Song. 2012. “Modeling and Performance Analysis of Rock Drill Drifters for Rock Stiffness.” International Journal of Precision Engineering and Manufacturing 13 (12): 2187–2193. doi:10.1007/s12541-012-0290-1.
   Web of Science ®Google Scholar
• Pavlovskaia, Ekaterina, David C. Hendry, and Marian Wiercigroch. 2015. “Modelling of High Frequency Vibro-impact Drilling.” International Journal of Mechanical Sciences 91: 110–119. doi:10.1016/j.ijmecsci.2013.08.009.
   Web of Science ®Google Scholar
• Peng, Haoyue. 2013. “The BP Neural Network’s GA Optimization and Its Realization on MATLAB.” IEEE 25th Chinese Control and Decision Conference.
   Google Scholar
• Şahin, Fatih. 2015. “Effects of Engine Parameters on Ionization Current and Modeling of Excess Air Coefficient by Artificial Neural Network.” Applied Thermal Engineering 90: 94–101. doi:10.1016/j.applthermaleng.2015.06.100.
   Web of Science ®Google Scholar
• Schunnesson, Håkan, Hanna Falksund, Anna Gustafson, Markus Danielsson, and Rajib Ghosh. 2017. “Assessment of Rock Mass Quality Using Drill Monitoring Technique for Hydraulic ITH Drills.” International Journal of Mining and Mineral Engineering 8 (3): 169–186. doi:10.1504/IJMME.2017.085830.
   Google Scholar
• Schunnesson, Håkan, and Shahram Mozaffari. 2009. “Production Control and Optimization in Open Pit Mining Using a Drill Monitoring System and an Image Analysis System: A Case Study from Aitik Copper Mine in Sweden.” Journal of Mines, Metals and Fuels 57 (9): 244–251.
   Google Scholar
• Seo, Jaho, Dae-Kyung Noh, Geun-Ho Lee, and Joo-Sup Jang. 2016. “A Percussion Performance Analysis for Rock-drill Drifter through Simulation Modeling and Experimental Validation.” International Journal of Precision Engineering and Manufacturing 17 (2): 163–170. doi:10.1007/s12541-016-0021-0.
   Web of Science ®Google Scholar
• Sreeraj, P., and T. Kannan. 2012. “Modelling and Prediction of Stainless Steel Clad Bead Geometry Deposited by GMAW Using Regression and Artificial Neural Network Models.” Advances in Mechanical Engineering 1: 52–60. doi:10.1155/2012/237379.
   Google Scholar
• Wang, Zhongbin, Lei Si, Chao Tan, and Xinhua Liu. 2014. “A Novel Approach for Shearer Cutting Load Identification through Integration of Improved Particle Swarm Optimization and Wavelet Neural Network.” Advances in Mechanical Engineering 4: 1–13. doi:10.1155/2014/521629.
   Google Scholar
• Wang, H. S., Y. N. Wang, and Y. C. Wang. 2013. “Cost Estimation of Plastic Injection Molding Parts through Integration of PSO and BP Neural Network.” Expert Systems with Applications 40 (2): 418–428. doi:10.1016/j.eswa.2012.01.166.
   Web of Science ®Google Scholar
• Wang, Zhenhua, Juntang Yuan, Zengbin Yin, and Chao Li. 2016. “Study on High-speed Cutting Parameters Optimization of AlMn1Cu Based on Neural Network and Genetic Algorithm.” Advances in Mechanical Engineering 8 (4): 1–12. doi:10.1177/1687814016644126.
   Web of Science ®Google Scholar
• Xie, Zhiqiang, Du Qingyun, Fu Ren, Xiaowei Zhang, and Sam Jamiesone. 2015. “Improving the Forecast Precision of River Stage Spatial and Temporal Distribution Using Drain Pipeline Knowledge Coupled with BP Artificial Neural Networks: A Case Study of Panlong River, Kunming, China.” Natural Hazards 77 (2): 1081–1102. doi:10.1007/s11069-015-1648-3.
   Web of Science ®Google Scholar
• Xiong, Ying, and Kai Cen. 2016. “Neural Network Based on Sum Squared Relative Error to Predict the Multixial Fatigue Life of Magnesium Alloy.” Journal of Mechanical Engineering 52 (4): 73–81. doi:10.3901/JME.2016.04.073.
   Google Scholar
• Yang, Yongqiang, Guijun Wang, and Yang Yang. 2014. “Parameters Optimization of Polygonal Fuzzy Neural Networks Based on GA-BP Hybrid Algorithm.” International Journal of Machine Learning and Cybernetics 5 (5): 815–822. doi:10.1007/s13042-013-0224-y.
   Web of Science ®Google Scholar
• You, Ximing, and Xuewu Cao. 2015. “Study of Liquid Lithium Coolant Interaction Based on BP Neural Network Optimized by Genetic Algorithm.” Journal of Fusion Energy 34 (4): 918–924. doi:10.1007/s10894-015-9903-x.
   Web of Science ®Google Scholar
• Zha, Chunqing, Gonghui Liu, Jun Li, Yumei Li, Yan Xi, and Boyun Guo. 2017. “Combined Percussive-rotary Drilling to Increase Rate of Penetration and Life of Drill Bit in Drilling Hard Rock Formation.” Chemistry and Technology of Fuels and Oils 53 (2): 254–262. doi:10.1007/s10553-017-0802-x.
   Web of Science ®Google Scholar
• Zhang, Zhenwu, and Xiantao Liu. 2017. “Prediction of Long-term Gas Load Based on Particle Swarm Optimization and Gray Neural Network Model.” Advances in Mechanical Engineering 9 (7): 1–8. doi:10.1177/1687814017711081.
   Web of Science ®Google Scholar
• Zhao, Hong-qiang, Yan Guo, and Wu Shuang-bin. 2011. “Simulation of Feeding and Rotating System of Down-the-Hole Drill Based on Fuzzy Control Method.” Computer Simulation 28 (8): 159–162. doi:10.3969/j.issn.1006-9348.2011.08.039.
   Google Scholar
• Zhou, Hao, Keli Xing, and Ming Qian. 2013. “Analysis on Typical Anti-jamming System of Hydraulic Rock Drill Rigs.” Mining and Processing Equipment 41 (3): 17–21. doi:10.16816/j.cnki.ksjx.2013.03.004.
   Google Scholar