158
Views
0
CrossRef citations to date
0
Altmetric
Research Article

A novel load ratio calculation method for calibrating force

, , , , ORCID Icon &
Pages S185-S192 | Received 11 Dec 2017, Accepted 29 Aug 2018, Published online: 17 Sep 2018

References

  • Akbar, M. 1992. “Temperature Compensation of Piezoresistive Pressure Sensors.” Sensors and Actuators A Physical 33 (3): 155–162. doi:10.1016/0924-4247(92)80161-U.
  • Balaji, S., and M. M. Mahapatra. 2013. “Experimental Study and Modeling of Friction Stir Welding Process to Produce Optimized AA2219 Butt Welds for Aerospace Application.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227 (1): 132–143. doi:10.1177/0954405412462806.
  • Chengqun, Q. I. U. 2007. “The Research on Application of MATLAB in Labview [J].” Mechanical Engineer 6: 47–49. 2017September20.
  • Faber, G. S., C.-C. Chang, I. Kingma, H. M. Schepers, S. Herber, P. H. Veltink, and J. T. Dennerlein. 2012. “A Force Plate Based Method for the Calibration of Force/Torque Sensors [J].” Journal of Biomechanics 7 (45): 1332–1338. doi:10.1016/j.jbiomech.2012.01.024.
  • Heidarzadeh, A., and T. Saeid. 2013. “Prediction of Mechanical Properties in Friction Stir Welds of Pure Copper.” Materials & Design 52: 1077–1087. doi:10.1016/j.matdes.2013.06.068.
  • Huang, B. 2015. “A flexible Tactile Sensor Calibration Method Based on an Air-Bearing Six-Dimensional Force Measurement Platform [J].” Review of Scientific Instruments 86: 075003. doi:10.1063/1.4926344.
  • Lakshminarayanan, A. K., and V. Balasubramanian. 2008. “Process Parameters Optimization for Friction Stir Welding of RDE-40 Aluminium Alloy Using Taguchi Technique.” Trans NonferrousMetals Soc China (Engl Ed) 18 (3): 548–554. doi:10.1016/S1003-6326(08)60096-5.
  • Si Li, et al. 2014. “Calibration Technology Research of Force Sensor in the Manufacture of Large Optics [C].” Proceedings of SPIE, 92811F. doi:10.1128/AEM.03322-14.
  • Liu, H., and P. Qing. 2007. “Research on Friction Stir Welding Defects [J].” Welding Special Survey 02: 17–21.
  • Liu, S. 2016. Research on Piezoelectric Dynamometer Multidimensional Load Sharing Structure and Arrangement Form [D]. Dalian Shi: Dalian University of Technology.
  • Min, Q., B. Sun, and Z. Jun. 2000. “Development of an Integrated 3D Piezoelectric Force Measurement Platform [J].” Journal of Dalian University of Technology 05: 570–572.
  • Oh, H. S., G. Kang, U. Kim, J. K. Seo, and H. R. Choi. 2017. “Calibration of 6 Axis Force/Torque Sensor by Using Deep-Learning Method[C].” 2017 IEEE 13th Conference on Automation Science and Engineering (CASE), Xi’an, China, August 20–23.
  • Ferran Reverter, et al. 2009. “Novel and Low-Cost Temperature Compensation Technology for Piezoresistive Pressure Sensors[C].” Imeko World Congress 76 (12): 2084–2087.
  • Sui, S., and Y. Wang. 2009. MATLAB and Engineering Data Analysis [M], 134–137. Beijing: Tsinghua University Press.
  • Sun, B., Q. Min, and Z. Jun. 2001. “Review and Prospect of Piezoelectric Sensors and Dynamometers [J].” Journal of Dalian University of Technology 02: 127–134.
  • Thomas, W. M., E. D. Nicholas, J. C. Needham, M. G. Murch, P. Temple- Smith, and C. J. Dawes. 1991. Friction Stir Butt Welding. GB patent no. 9125978.8.
  • Wang, J. 2012. “Research on Three-Way Force and Temperature Testing Technology of Friction Stir Welding [J].” Electromechanical Department of Nanjing University of Aeronautics and Astronautics 03: 27–29.
  • Wang, M., H. Cao, C. Shen, and J. Chai. 2018. “A Novel Self-Calibration Method and Experiment of MEMS Gyroscope Based on Virtual Coriolis Force [J].” Micromachines 9: 328. doi:10.3390/mi9070328.
  • Weidong, X., Y. Hao, and S. Jisheng. 2013. “Review and Proposition of New Dynamic Force Calibration Method [C].” Proceedings of 2013 IEEE 11th International Conference on Electronic Measurement and Instruments, ICEMI 2013 (1): 451–455.
  • Qin Xing. et al. 2011. “Design, Calibration and Error Analysis of A Piezoelectric Thrust Dynamometer for Small Thrust Liquid Pulsed Rocket Engines [J].” Measurement 338–340. doi:10.1016/j.measurement.2010.10.008.
  • Ye, F., H. Fujii, T. Tsumura, and K. Nakata. 2006. “Friction Stir Welding of Inconel Alloy 600.” Journal of Materials Sciences 41 (16): 5376–5379. doi:10.1007/s10853-006-0169-6.
  • Yingjun, L. 2010. Study of A Novel Parallel Piezoelectric Six-Dimensional Heavy Force/Torque Sensor on Axis [D]. Dalian Shi: Dalian University of Technology.
  • Zhang, Y., and B. Sun. 1980. “Principle and Design of Piezoelectric Quartz Three-Directional Force Sensor [J].” Instrument Manufacturing 06: 25–29.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.