References
- Ansari, M. A., K. Y. Kim, K. Anwar, and S. M. Kim. 2012. “Vortex Micro T-Mixer with Non-Aligned Inputs.” Chemical Engineering Journal 181: 846–850. doi:https://doi.org/10.1016/j.cej.2011.11.113.
- Bahiraei, M., K. Gharagozloo, M. Alighardashi, and N. Mazaheri. 2017. “CFD Simulation of Irreversibilities for Laminar Flow of a Power-Law Nanofluid within a Minichannel with Chaotic Perturbations: An Innovative Energy-Efficient Approach.” Energy Conversion and Management 144: 374–387. doi:https://doi.org/10.1016/j.enconman.2017.04.068.
- Bahiraei, M., and N. Mazaheri. 2018. “Application of a Novel Hybrid Nanofluid Containing Graphene–Platinum Nanoparticles in a Chaotic Twisted Geometry for Utilization in Miniature Devices: Thermal and Energy Efficiency Considerations.” International Journal of Mechanical Sciences 138: 337–349. doi:https://doi.org/10.1016/j.ijmecsci.2018.02.030.
- Bahiraei, M., N. Mazaheri, and F. Aliee. 2019. “Second Law Analysis of a Hybrid Nanofluid in Tubes Equipped with Double Twisted Tape Inserts.” Powder Technology 345: 692–703. doi:https://doi.org/10.1016/j.powtec.2019.01.060.
- Bahiraei, M., N. Mazaheri, and M. Alighardashi. 2017. “Development of Chaotic Advection in Laminar Flow of a non-Newtonian Nanofluid: A Novel Application for Efficient Use of Energy.” Applied Thermal Engineering 124: 1213–1223. doi:https://doi.org/10.1016/j.applthermaleng.2017.06.106.
- Bau, H. H., J. Zhong, and M. Yi. 2001. “A Minute Magneto Hydro Dynamic (MHD) Mixer.” Sensors and Actuators B: Chemical 79 (2–3): 207–215. doi:https://doi.org/10.1016/S0925-4005(01)00851-6.
- Bothe, D., A. Lojewski, and H. J. Warnecke. 2011. “Fully Resolved Numerical Simulation of Reactive Mixing in a T-Shaped Micromixer Using Parabolized Species Equations.” Chemical Engineering Science 66 (24): 6424–6440. doi:https://doi.org/10.1016/j.ces.2011.08.045.
- Buchegger, W., C. Wagner, B. Lendl, M. Kraft, and M. J. Vellekoop. 2011. “A Highly Uniform Lamination Micromixer with Wedge Shaped Inlet Channels for Time Resolved Infrared Spectroscopy.” Microfluidics and Nanofluidics 10 (4): 889–897. doi:https://doi.org/10.1007/s10404-010-0722-0.
- Chen, J. J., and C. H. Chen. 2011. “Investigation of Swirling Flows in Mixing Chambers.” Modelling and Simulation in Engineering 2011: 10. doi:https://doi.org/10.1155/2011/259401.
- Chen, K., and A. Tseng (2003). U.S. Patent Application No. 10/317,405.
- Cho, C. C. 2008. “Electrokinetically Driven Flow Mixing Utilizing Chaotic Electric Fields.” Microfluidics and Nanofluidics 5 (6): 785–793. doi:https://doi.org/10.1007/s10404-008-0286-4.
- Chung, C. K., T. R. Shih, B. H. Wu, and C. K. Chang. 2010. “Design and Mixing Efficiency of Rhombic Micromixer with Flat Angles.” Microsystem Technologies 16 (8–9): 1595–1600. doi:https://doi.org/10.1007/s00542-009-0980-5.
- Cortes-Quiroz, C. A., A. Azarbadegan, and M. Zangeneh. 2014. “Evaluation of Flow Characteristics that Give Higher Mixing Performance in the 3-D T-Mixer versus the Typical T-Mixer.” Sensors and Actuators B: Chemical 202: 1209–1219. doi:https://doi.org/10.1016/j.snb.2014.06.042.
- Engler, M., N. Kockmann, T. Kiefer, and P. Woias. 2004. “Numerical and Experimental Investigations on Liquid Mixing in Static Micromixers.” Chemical Engineering Journal 101 (1): 315–322. doi:https://doi.org/10.1016/j.cej.2003.10.017.
- Falk, L., and J. M. Commenge. 2010. “Performance Comparison of Micromixers.” Chemical Engineering Science 65 (1): 405–411. doi:https://doi.org/10.1016/j.ces.2009.05.045.
- Hardt, S., K. S. Drese, V. Hessel, and F. Schönfeld. 2005. “Passive Micromixers for Applications in the Microreactor and μTAS Fields.” Microfluidics and Nanofluidics 1 (2): 108–118. doi:https://doi.org/10.1007/s10404-004-0029-0.
- Hsiao, K. Y., C. Y. Wu, and Y. T. Huang. 2014. “Fluid Mixing in a Microchannel with Longitudinal Vortex Generators.” Chemical Engineering Journal 235: 27–36. doi:https://doi.org/10.1016/j.cej.2013.09.010.
- Jeong, G. S., S. Chung, C. B. Kim, and S. H. Lee. 2010. “Applications of Micromixing Technology.” Analyst 135 (3): 460–473. doi:https://doi.org/10.1039/b921430e.
- Jin, S. Y., Y. Z. Liu, W. Z. Wang, Z. M. Cao, and H. S. Koyama. 2006. “Numerical Evaluation of Two-Fluid Mixing in a Swirl Micro-Mixer.” Journal of Hydrodynamics 18 (5): 542–546. doi:https://doi.org/10.1016/S1001-6058(06)60132-7.
- Kanaris, A., and A. Mouza. 2018. “Design of a Novel μ-Mixer.” Fluids 3 (1): 10. doi:https://doi.org/10.3390/fluids3010010.
- Kaushik, P., S. Pati, S. K. Som, and S. Chakraborty. 2012a. “Hydrodynamic Swirl Decay in Microtubes with Interfacial Slip.” Nanoscale and Microscale Thermophysical Engineering 16 (2): 133–143. doi:https://doi.org/10.1080/15567265.2012.655851.
- Kaushik, P., S. Pati, S. K. Som, and S. Chakraborty. 2012b. “Hydrodynamic and Thermal Transport Characteristics of Swirling Flows through Microchannels with Interfacial Slip.” International Journal of Heat and Mass Transfer 55 (15–16): 4359–4365. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2012.04.004.
- Lin, Y. 2015. “Numerical Characterization of Simple Three-Dimensional Chaotic Micromixers.” Chemical Engineering Journal 277: 303–311. doi:https://doi.org/10.1016/j.cej.2015.04.123.
- Matsunaga, T., and K. Nishino. 2014. “Swirl-Inducing Inlet for Passive Micromixers.” RSC Advances 4 (2): 824–829. doi:https://doi.org/10.1039/C3RA44438D.
- Mondal, B., S. Pati, and P. Patowari (2019). Analysis Of Mixing Performances in Microchannel with Obstacles Of Different Aspect Ratios. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/0954408919826748
- Mondal, B., S. K. Mehta, P. K. Patowari, and S. Pati. 2019. “Numerical Study of Mixing in Wavy Micromixers: Comparison between Raccoon and Serpentine Mixer.” Chemical Engineering and Processing-Process Intensification 136: 44–61. doi:https://doi.org/10.1016/j.cep.2018.12.011.
- Nimafar, M., V. Viktorov, and M. Martinelli. 2012. “Experimental Comparative Mixing Performance of Passive Micromixers with H-Shaped Sub-Channels.” Chemical Engineering Science 76: 37–44. doi:https://doi.org/10.1016/j.ces.2012.03.036.
- Pati, S., S. K. Som, and S. Chakraborty. 2013. “Thermodynamic Performance of Microscale Swirling Flows with Interfacial Slip.” International Journal of Heat and Mass Transfer 57 (1): 397–401. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2012.10.045.
- Pati, S., & Kumar, V. (2019). Effects of temperature-dependent thermo-physical properties on hydrodynamic swirl decay in microtubes. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 233(3),427–435. https://doi.org/10.1177/0954408918755782.
- Soleymani, A., E. Kolehmainen, and I. Turunen. 2008. “Numerical and Experimental Investigations of Liquid Mixing in T-Type Micromixers.” Chemical Engineering Journal 135: S219–S228. doi:https://doi.org/10.1016/j.cej.2007.07.048.
- Stroock, A. D., S. K. Dertinger, A. Ajdari, I. Mezić, H. A. Stone, and G. M. Whitesides. 2002. “Chaotic Mixer for Microchannels.” Science 295 (5555): 647–651. doi:https://doi.org/10.1126/science.1066238.
- Wiles, C., and P. Watts. 2016. Micro Reaction Technology in Organic Synthesis. CRC Press, New York, 2011.
- Wong, S. H., M. C. Ward, and C. W. Wharton. 2004. “Micro T-Mixer as a Rapid Mixing Micromixer.” Sensors and Actuators B: Chemical 100 (3): 359–379. doi:https://doi.org/10.1016/j.snb.2004.02.008.
- Yaralioglu, G. G., I. O. Wygant, T. C. Marentis, and B. T. Khuri-Yakub. 2004. “Ultrasonic Mixing in Microfluidic Channels Using Integrated Transducers.” Analytical Chemistry 76 (13): 3694–3698. doi:https://doi.org/10.1021/ac035220k.