References
- An C. H., Zhang Y., Xu Q., Zhang F. H., Zhang J. F., Zhang L. J., and Zhang J. H . 2010. “Modeling of Dynamic Characteristic of the Aerostatic Bearing Spindle in an Ultra-Precision Fly Cutting Machine.” International Journal of Machine Tools & Manufacture 50 (4): 374–385. DOI:https://doi.org/10.1016/j.ijmachtools.2009.11.003.
- Beheshti-Aval, S. B., and M. Lezgy-Nazargah. 2010. “Analysis of Static Performance of Porous Graphite Aerostatic Thrust Bearings.” China Mechanical Engineering 5 (19): V5-112-V5-115.
- Chen, C. H., T. H. Tsai, D. W. Yang, Y. Kang, and J. H. Chen, et al. 2010a. “The Comparison in Stability Of Rotor-aerostatic Bearing System Compensated by Orifices and Inherences.” Tribology International 43 (8): 1360–1373. doi: https://doi.org/10.1016/j.triboint.2010.01.006.
- Chen, D. 2010b. “Identification Fluctuation Of Aerostatic Guideway.” Journal Of Mechanical Engineering 46 (21): 187. doi: https://doi.org/10.3901/JME.2010.21.187.
- Chen, Y. S., C. C. Chiu, and Y. D. Cheng. 2010c. “Influences Of Operational Conditions and Geometric Parameters on The Stiffness Of Aerostatic Journal Bearings.” Precision Engineering 34 (4): 722–734. doi: https://doi.org/10.1016/j.precisioneng.2010.04.001.
- Du, J. M., Z. S. Lu, and Y. Z. Sun. 2002. “Performance Comparison of Orifice Restricted and Porous Gas Hydrostatic Bearings.” Lubrication Engineering 2002 (4): 3–5.
- Feng K., Li W. J., Huo Y., and Huo C. J. 2018. “Thermal Characteristic Analysis of Aerostatic Porous Journal Bearings with Surface-Restricted Layer.” Journal of Mechanical Engineering 54 (12): 216–224. DOI:https://doi.org/10.3901/JME.2018.12.216.
- Fourka, M., and M. Bonis. 1997. “Comparison between Externally Pressurized Gas Thrust Bearings with Different Orifice and Porous Feeding Systems.” Wear 210 (1): 311–317. doi:https://doi.org/10.1016/S0043-1648(97)00079-3.
- Gao S., Cheng K., Chen S., Ding H., and Fu H. Y. 2015. “CFD Based Investigation on Influence of Orifice Chamber Shapes for the Design of Aerostatic Thrust Bearings at Ultra-High Speed Spindles”. Tribology International 92: 211–221. doi:https://doi.org/10.1016/j.triboint.2015.06.020.
- Huang T. Y., Hsu S. Y., Shen S. C., Lin S. C. and Chou T. H. 2015. “Effects of Number of Porous Insert, Spindle Speed and Gap Thickness on Characteristics of a Partially Porous Aerostatic Journal Bearing”. Key Engineering Materials 649: 30–37.
- Li, Y., and H. Ding. 2007. “Influences of the Geometrical Parameters of Aerostatic Thrust Bearing with Pocketed Orifice -Type Restrictor on Its Performance.” Tribology International 40 (7): 1120–1126. doi:https://doi.org/10.1016/j.triboint.2006.11.001.
- Li, Y., and H. Ding. 2012. “A Simplified Calculation Method on the Performance Analysis of Aerostatic Thrust Bearing with Multiple Pocketed Orifice-Type Restrictors.” Tribology International 56 (56): 66–71. doi:https://doi.org/10.1016/j.triboint.2012.06.018.
- Lin, J. R. 2000. “Surface Roughness Effect on the Dynamic Stiffness and Damping Characteristics of Compensated Hydrostatic Thrust Bearings.” International Journal of Machine Tools & Manufacture 40 (11): 1671–1689. doi:https://doi.org/10.1016/S0890-6955(00)00012-2.
- Liu H., Xu H., Ellison P. J., and Jin Z. M. 2010. “Application of Computational Fluid Dynamics and Fluid–Structure Interaction Method to the Lubrication Study of a Rotor–Bearing System.” Tribology Letters 38 (3): 325–336. DOI:https://doi.org/10.1007/s11249-010-9612-6.
- Long, W., and G. Bao. 2010. “Entrance Effect on Load Capacity of Orifice Compensated Aerostatic Bearing with Feeding Pocket.” Chinese Journal of Mechanical Engineering 23 (4): 451–459. doi:https://doi.org/10.3901/CJME.2010.04.451.
- Luong T. S., Potze W., Post J. B., Ostayen R. A. J., and Van B. A. 2004. “Numerical and Experimental Analysis of Aerostatic Thrust Bearings with Porous Restrictors.” Tribology International 37 (10): 825–832. DOI:https://doi.org/10.1016/j.triboint.2004.05.004.
- Ma W., Cui J., Liu Y., and Tan J. B. 2016. “Improving the Pneumatic Hammer Stability of Aerostatic Thrust Bearing with Recess Using Damping Orifices”. Tribology International 103: 281–288. doi:https://doi.org/10.1016/j.triboint.2016.06.009.
- Nishio, U., K. Somaya, and S. Yoshimoto. 2011. “Numerical Calculation and Experimental Verification of Static and Dynamic Characteristics of Aerostatic Thrust Bearings with Small Feedholes.” Tribology International 44 (12): 1790–1795. doi:https://doi.org/10.1016/j.triboint.2011.07.004.
- Otsu, Y., K. Somaya, and S. Yoshimoto. 2011. “High-Speed Stability of a Rigid Rotor Supported by Aerostatic Journal Bearings with Compound Restrictors.” Tribology International 44 (1): 9–17. doi:https://doi.org/10.1016/j.triboint.2010.09.007.
- Rao T. V. V. L., Rani A. M. A., Nagarajan T., and Hashim F. M. 2013. “Analysis of Journal Bearing with Double-Layer Porous Lubricant Film: Influence of Surface Porous Layer Configuration.” Tribology Transactions 56 (5): 841–847. DOI:https://doi.org/10.1080/10402004.2013.801100.
- Schenk C., Buschmann S., Risse S., Ramona E., and Andreas T. 2008. “Comparison between Flat Aerostatic Gas-Bearing Pads with Orifice and Porous Feedings at High-Vacuum Conditions.” Precision Engineering 32 (4): 319–328. DOI:https://doi.org/10.1016/j.precisioneng.2008.01.001.
- Shao J., Liu G., Yu X. D., Zhang Y., Meng X., and Jiang H. 2017. “Effect of Recess Depth on Lubrication Performance of Annular Recess Hydrostatic Thrust Bearing by Constant Rate Flow.” Industrial Lubrication & Tribology 70 (1): 8–14.
- Szwarcman, M., and R. Gorez. 1978. “Design of Aerostatic Journal Bearings with Partially Porous Walls.” International Journal of Machine Tool Design & Research 18 (2): 49–58. doi:https://doi.org/10.1016/0020-7357(78)90008-2.
- Yu H.; Li H.; Zhao H., and Ma W. 2015. “Research on the Static Characteristics of Circular Thrust Porous Aerostatic Bearings”. IEEE International Conference on Mechatronics and Automation. IEEE, 2015: 1407–1411, in Beijing, China.
- Zhang, X. F., and B. Lin. 2012. “Theoretical Research on Deformation of Porous Material in Air Bearing.” Applied Mechanics & Materials 2012: 779–784.