Mechanical properties improvement of MIG welding steel sheets using Taguchi method

References

• Abhyankar, A. A., M. N. Dnyanesh, S. P. Shivam, and S. Janmesh. 2016. “An Experimental Study of Arc Welding Parameters for Ultimate Strength in Bending & Hardness on Dmr 249a & Optimization.” International Journal of Mechanical and Production Engineering 4 (7): 33–37.
   Google Scholar
• Aghdeab, S. H., V. N. Najm, and A. M. Saleh. 2018. “Surface Roughness Evaluation in WEDM Using Taguchi Parameter Design Method.” Engineering and Technology Journal 36 (A–1): 60–64. doi:https://doi.org/10.30684/etj.36.1A.9.
   Google Scholar
• Ahire, P. G., U. S. Patil, and M. S. Kadam. 2018. “Genetic Algoarithm Based Optimization of the Process Parameters for Manual Metal Arc Welding of Dissimilar Metal Joint.” Procedia Manufacturing 20: 106–112. doi:https://doi.org/10.1016/j.promfg.2018.02.015.
   Google Scholar
• ASTM International. 1997. “Standard Test Method for Guided Bend Test for Ductility of Welds.” Designation: 3(01): 190–192.
   Google Scholar
• Bagchi, T. P. 1993. Taguchi Methods Explained Practical Steps to Robust Design. Prentice-Hall of India, New Delhi. ISBN-0-87692-808-4.
   Google Scholar
• Bodude, M. A., and I. Momohjimoh. 2015. “Studies on Effects of Welding Parameters on the Mechanical Properties of Welded Low-Carbon Steel.” Journal of Minerals and Materials Characterization and Engineering 3: 142–153. doi:https://doi.org/10.4236/jmmce.2015.33017.
   Google Scholar
• DIN standard. 1986. “Hot Rolled Sheet and Strip.” Technical Delivery Conditions, DIN 1614 (Part 1). 1-4.
   Google Scholar
• Ghosh, N., P. K. Pal, and G. Nandi. 2016. “Parametric Optimization of MIG Welding on 316L Austenitic Stainless Steel by Taguchi Method.” Archives of Materials Science and Engineering 79 (1): 27–36. doi:https://doi.org/10.5604/18972764.1227660.
   Google Scholar
• Ibrahim, I. A., S. A. Mohamat, A. Amir, and A. Ghalib. 2012. “The Effect of Gas Metal Arc Welding (GMAW) Processes on Different Welding Parameters.” Procedia Engineering 41: 1502–1506. doi:https://doi.org/10.1016/j.proeng.2012.07.342.
   Google Scholar
• Jodia, W. M. 2017. “Study the Change of Current Weld on Mechanical Properties and Microstructure of Low Carbon Steel Welded by Electric Arc Welding.” Journal of Babylon University, Engineering Sciences 25 (4): 1470–1477.
   Google Scholar
• Khan, U., N. Z. Khan, and J. Gulati. 2017. “Ultrasonic Welding of Bi-Metals: Optimizing Process Parameters for Maximum Tensile-shear Strength and Plasticity Welds.” Procedia Engineering 173: 1447–1454. doi:https://doi.org/10.1016/j.proeng.2016.12.210.
   Google Scholar
• Kharea, S. K., and S. Agarwalb. 2017. “Optimization of Machining Parameters in Turning of AISI 4340 Steel under Cryogenic Condition Using Taguchi Technique.” The 50th CIRP Conference on Manufacturing Systems, Procedia CIRP 63: 610–614. doi:https://doi.org/10.1016/j.procir.2017.03.166.
   Google Scholar
• Kulkarni, S. S., S. R. Joshi, and J. P. Ganjigatti. 2014. “A Review on Effect of Welding Parameters on Mechanical Properties for Aluminum Alloys Using MIG Welding.” International Journal of Latest Trends in Engineering and Technology (IJLTET) 4 (1): 224–227. https://www.ijltet.org/journal_details.php?id=890&j_id=2278.
   Google Scholar
• Maan, H. Y., and W. K. Hamdan. 2015. “Determining the Effect of Process Parameters on Surface Roughness in Two Point Incremental Sheet Metal Forming Process Using the Taguchi Method.” Engineering and Technology Journal 33 (A–7): 1569–1582.
   Google Scholar
• Manjaiah, M., R. F. Laubscher, A. Kumar, and S. Basavarajappa. 2016. “Parametric Optimization of MRR and Surface Roughness in Wire Electro Discharge Machining (WEDM) of D2 Steel Using Taguchi-based Utility Approach.” International Journal of Mechanical and Materials Engineering 11 (7): 1–9. doi:https://doi.org/10.1186/s40712-016-0060-4.
   Google Scholar
• Mersni, W., M. Boujelbene, S. B. Salem, and A.-S. Alghamdi. 2018. “Optimization of the Surface Roughness in Ball End Milling of Titanium Alloy Ti-6Al-4V Using the Taguchi Method.” 2nd International Conference on Materials Manufacturing and Design Engineering, Procedia Manufacturing 20: 271–276. doi:https://doi.org/10.1016/j.promfg.2018.02.040.
   Google Scholar
• Mohammed, R. A. 2018. “Study of Some Mechanical Properties and Erosive Behavior by Taguchi Method for Hybrid Nano Composites.” Engineering and Technology Journal 36 (A–4): 471–479. doi:https://doi.org/10.30684/etj.36.4A.15.
   Google Scholar
• Murat, S. 2015. “Optimization of the Surface Roughness by Applying the Taguchi Technique for the Turning of Stainless Steel under Cooling Conditions.” Original Scientific Article 49 (6): 941–948.
   Google Scholar
• Neamah, H. S. 2018. “Studying of Heat Treatment Influence on Mechanical Behavior of AA6061-T6 by Desirability Function Analysis Approach.” Engineering and Technology Journal 36 (A–4): 368–372. doi:https://doi.org/10.30684/etj.36.4A.2.
   Google Scholar
• Ogbunnaoffor, C. K., J. U. Odo, and E. E. Nnuka. 2016. “The Effect of Welding Current and Electrode Types on Tensile Properties of Mild Steel.” International Journal of Scientific & Engineering Research 7 (5): 1120–1123.
   Google Scholar
• Rizvi, S. A., and S. P. Tewari. 2017. “Effect of the Shielding Gas Flow Rate on Mechanical Properties and Microstructure of Structural Steel (IS2062) Welds.” Mechanics and Mechanical Engineering 21 (4): 971–984.
   Google Scholar
• Sundararaj, P., and M. Muthukumar. 2018. “Characterisation of Microstructure, Mechanical and Corrosion Properties of Pulsed MIG Welded Modified P91 Steel Weld Metal.” IOP Conf. Series: Materials Science and Engineering 314 (012015): 1–6. doi:https://doi.org/10.1088/1757-899X/314/1/012015.
   Google Scholar
• Tawfeek, T. 2017. “Study the Influence of Gas Metal Arc Welding Parameters on the Weld Metal and Heat Affected Zone Microstructures of Low Carbon Steel.” International Journal of Engineering and Technology (IJET) 9 (3): 2013–2019. doi:https://doi.org/10.21817/ijet/2017/v9i3/1709030272.
   Google Scholar
• Ufrgs, L., B. L. Alia, R. L. Alley, et al. 1993. “Welding, Brazing, and Soldering.” ASM Handbook 6: 569–581.
   Google Scholar