References
- Ahmadi, A., M. R. Toroghinejad, and A. Najafizadeh. 2014. “Evaluation of Microstructure and Mechanical Properties of Al/Al2O3/SiC Hybrid Composite Fabricated by Accumulative Roll Bonding Process.” Materials & Design 53: 13–19. doi:https://doi.org/10.1016/j.matdes.2013.06.064.
- Balakrishnan, M., I. Dinaharan, R. Palanivel, and R. Sathiskumar. 2019. “Effect of Friction Stir Processing on Microstructure and Tensile Behavior of AA6061/Al3Fe Cast Aluminum Matrix Composites.” Journal of Alloys and Compounds 785: 531–541. doi:https://doi.org/10.1016/j.jallcom.2019.01.211.
- Barati, M., M. Abbasi, and M. Abedini. 2019. “The Effects of Friction Stir Processing and Friction Stir Vibration Processing on Mechanical, Wear and Corrosion Characteristics of Al6061/SiO2 Surface Composite.” Journal of Manufacturing Processes 45: 491–497. doi:https://doi.org/10.1016/j.jmapro.2019.07.034.
- Cavaliere, P., G. Campanile, F. Panella, and A. Squillace. 2006. “Effect of Welding Parameters on Mechanical and Microstructural Properties of AA6056 Joints Produced by Friction Stir Welding.” Journal of Materials Processing Technology 180: 263–270. doi:https://doi.org/10.1016/j.jmatprotec.2006.06.015.
- Cavalierea, P., A. Squillace, and F. Panellaa. 2008. “Effect of Welding Parameters on Mechanical and Microstructural Properties of AA6082 Joints Produced by Friction Stir Welding.” Journal of Materials Processing Technology 200: 364–372. doi:https://doi.org/10.1016/j.jmatprotec.2007.09.050.
- Devaraju, A., A. Kumar, A. Kumaraswamy, and B. Kotiveerachari. 2013. “Influence of Reinforcements (sic and Al2O3) and Rotational Speed on Wear and Mechanical Properties of Aluminum Alloy 6061-T6 Based Surface Hybrid Composites Produced via Friction Stir Processing.” Materials & Design 51: 331–341. doi:https://doi.org/10.1016/j.matdes.2013.04.029.
- Dinaharan, I., M. Balakrishnan, J. D. R. Selvam, and E. T. Akinlabi. 2019. “Microstructural Characterization and Tensile Behavior of Friction Stir Processed AA6061/Al2Cu Cast Aluminum Matrix Composites.” Journal of Alloys and Compounds 781: 270–279. doi:https://doi.org/10.1016/j.jallcom.2018.12.091.
- Dinaharan, I., K. Kalaiselvan, and N. Murugan. 2017. “Influence of Rice Husk Ash Particles on Microstructure and Tensile Behavior of AA6061 Aluminum Matrix Composites Produced Using Friction Stir Processing.” Composites Communications 3: 42–46. doi:https://doi.org/10.1016/j.coco.2017.02.001.
- Dwivedi, S. P., and V. R. Mishra. 2019. “Physico-Chemical, Mechanical and Thermal Behaviour of Agro-waste RHA-Reinforced Green Emerging Composite Material.” Arabian Journal for Science and Engineering 44: 8129–8142. doi:https://doi.org/10.1007/s13369-019-03784-z.
- Ebhota, W. S., and T.-C. Jen. 2017. “Casting and Applications of Functionally Graded Metal Matrix Composites.” Book Chapter in Intechopen. doi:https://doi.org/10.5772/intechopen.71225.
- Gangil, N., S. Maheshwari, A. N. Siddiquee, M. H. Abidi, M. A. El-Meligy, and J. A. Mohammed. 2019. “Investigation on Friction Stir Welding of Hybrid Composites Fabricated on Al–Zn–Mg–Cu Alloy through Friction Stir Processing.” Journal of Materials Research and Technology. doi:https://doi.org/10.1016/j.jmrt.2019.06.033.
- Kingsly Gladston, J. A., N. Mohamedsheriff, I. Dinaharan, and J. Davidraja Selvam. 2015. “Production and Characterization of Rich Husk Ash Particulate Reinforced AA6061 Aluminum Alloy Composites by Compocasting.” Transactions of Nonferrous Metals Society of China 25: 683–691. doi:https://doi.org/10.1016/S1003-6326(15)63653-6.
- Kumar, V., S. Jain, K. U. Yazar, and S. Muthukumaran. 2019. “Development and Characterization of Al5083-CNTs/SiC Composites via Friction Stir Processing.” Journal of Alloys and Compounds 798: 82–92. doi:https://doi.org/10.1016/j.jallcom.2019.05.232.
- Kumbhar, N. T., and K. Bhanumurthy. 2008. “Friction Stir Welding of Al 6061 Alloy.” Asian Journal of Experimental Science 22 (2): 63–74.
- Liu, H. J., J. C. Feng, H. Fujii, and K. Nogi. 2005. “Wear Characteristics of a WC–Co Tool in Friction Stir Welding of AC4AC30 vol%SiCp Composite.” International Journal of Machine Tools & Manufacture 45: 1635–1639. doi:https://doi.org/10.1016/j.ijmachtools.2004.11.026.
- Mavhungu, S. T., E. T. Akinlabi, M. A. Onitiri, and F. M. Varachia. 2017. “Aluminium Matrix Composite for Industrial Use: Advances and Trends.” Procedia Manufacturing 7: 178–182. doi:https://doi.org/10.1016/j.promfg.2016.12.045.
- Mishraa, R. S., and Z. Y. Ma. 2005. “Friction Stir Welding and Processing.” Materials Science and Engineering 50: 1–78. doi:https://doi.org/10.1016/j.mser.2005.07.001.
- Mithun, B. R., N. Madeva, V. Auradi, and V. Bharath. 2017. “Microstructure and Mechanical Properties of Cu-Coated Al2O3 Particulate Reinforced 6061 Al Metal Matrix Composite.” Materials Today: Proceedings 4: 11015–11022.
- Natarajan, N., S. Vijayarangan, and I. Rajendran. 2006. “Wear Behaviour of A356/25SiCp Aluminium Matrix Composites Sliding against Automobile Friction Material.” Wear 261: 812–822. doi:https://doi.org/10.1016/j.wear.2006.01.011.
- Pol, N., G. Verma, R. P. Pandey, and T. Shanmugasundaram. 2019. “Fabrication of AA7005/TiB2-B4C Surface Composite by Friction Stir Processing: Evaluation of Ballistic Behaviour.” Defence Technology 15: 363–368. doi:https://doi.org/10.1016/j.dt.2018.08.002.
- Rahmani Fard, R., and F. Akhlaghi. 2007. “Effect of Extrusion Temperature on the Microstructure and Porosity of A356-Sicp Composites.” Journal of Materials Processing Technology 187–188: 433–436. doi:https://doi.org/10.1016/j.jmatprotec.2006.11.077.
- Rajan, T. P. D., R. M. Pillai, B. C. Pai, K. G. Satyanarayana, and P. K. Rohatgi. 2007. “Fabrication and Characterisation of Al–7Si–0.35Mg/Fly Ash Metal Matrix Composites Processed by Different Stir Casting Routes.” Composites Science and Technology 67: 3369–3377. doi:https://doi.org/10.1016/j.compscitech.2007.03.028.
- Ritukesh, S. H. A. R. M. A., A. K. SINGH, A. R. O. R. A. Amit, S. PATI, and P. S. De. 2019. “Effect of Friction Stir Processing on Corrosion of Al-TiB2 Based Composite in 3.5 Wt.% Sodium Chloride Solution.” Transactions of Nonferrous Metals Society of China 29: 1383–1392. doi:https://doi.org/10.1016/S1003-6326(19)65045-4.
- Rohatgi, P. K., J. K. Kim, N. Gupta, S. Alaraj, and A. Daoud. 2006. “Compressive Characteristics of A356/Fly Ash Cenosphere Composites Synthesized by Pressure Infiltration Technique.” Composites Part A: Applied Science and Manufacturing 37: 430–437. doi:https://doi.org/10.1016/j.compositesa.2005.05.047.
- Sajjadi, S. A., H. R. Ezatpour, and M. Torabi Parizi. 2012. “Comparison of Microstructure and Mechanical Properties of A356 Aluminum Alloy/Al2O3 Composites Fabricated by Stir and Compo-Casting Processes.” Materials & Design 34: 106–111. doi:https://doi.org/10.1016/j.matdes.2011.07.037.
- Shang, J., L. Ke, F. Liu, F. Lv, and L. Xing. 2019. “Aging Behavior of Nano SiC Particles Reinforced AZ91D Composite Fabricated via Friction Stir Processing.” Journal of Alloys and Compounds 797: 1240–1248. doi:https://doi.org/10.1016/j.jallcom.2019.04.280.
- Sivanesh Prabhu, M., A. Elaya Perumal, S. Arulvel, and R. Franklin Issac. 2019. “Friction and Wear Measurements of Friction Stir Processed Aluminium Alloy 6082/caco3 Composite.” Measurement 142: 10–20. doi:https://doi.org/10.1016/j.measurement.2019.04.061.
- Sudarshan, K., and M. K. Surappa. 2008. “Dry Sliding Wear of Fly Ash Particle Reinforced A356 Al Composites.” Wear 265: 349–360. doi:https://doi.org/10.1016/j.wear.2007.11.009.
- Titus Thankachan, K., S. Prakash, and V. Kavimani. 2019. “Investigating the Effects of Hybrid Reinforcement Particles on the Microstructural, Mechanical and Tribological Properties of Friction Stir Processed Copper Surface Composites.” Composites Part B: Engineering 174: 107057. doi:https://doi.org/10.1016/j.compositesb.2019.107057.
- Verma, N., and S. C. Vettivel. 2018. “Characterization and Experimental Analysis of Boron Carbide and Rice Husk Ash Reinforced AA7075 Aluminium Alloy Hybrid Composite.” Journal of Alloys and Compounds 741: 981–998. doi:https://doi.org/10.1016/j.jallcom.2018.01.185.
- Wang, T., B. Gwalani, S. Shukla, M. Frank, and R. S. Mishra. 2019. “Development of in Situ Composites via Reactive Friction Stir Processing of Ti–B4C System.” Composites Part B: Engineering 172: 54–60. doi:https://doi.org/10.1016/j.compositesb.2019.05.067.
- Zhao, H.-L., J.-S. Yue, Y. Gao, and K.-R. Weng. 2013. “Grain and Dendrite Refinement of A356 Alloy with Al–Ti–C–Re Master Alloy.” Rare Metals 32: 12–17. doi:https://doi.org/10.1007/s12598-013-0021-5.