References
- Chen, J., L. Gu, H. Xu, and W. Zhao. 2016. “Study on Blasting Erosion Arc Machining of Ti-6Al-4V Alloy.” International Journal Advanced Manufacturing Technology 85: 2819–2829. doi:https://doi.org/10.1007/s00170-015-8126-7.
- Gnanavelbabu, A., K. Rajkumar, and P. Saravanan. 2018. “Investigation on the Cutting Quality Characteristics of Abrasive Water Jet Machining of AA6061 B4C-hBN Hybrid Metal Matrix Composites.” Materials and Manufacturing Processes 33 (12): 1313–1323. doi:https://doi.org/10.1080/10426914.2018.1453146.
- Gu, L., J. Chen, H. Xu, and W. Zhao. 2016. “Blasting Erosion Arc Machining of 20 Vol.% SiC/Al Metal Matrix Composites.” International Journal Advanced Manufacturing Technology 87: 2775–2784. doi:https://doi.org/10.1007/s00170-016-8676-3.
- Jain, V. K. 2015. Advanced Machining Processes, 1–9. New Delhi: Allied Publishers.
- Kumar, P., and R. Parkash. 2016. “Experimental Investigation and Optimization of EDM Process Parameters for Machining of Aluminum Boron Carbide (Al–B4c) Composite.” Machining Science and Technology 20 (2): 330–348. doi:https://doi.org/10.1080/10910344.2016.1168931.
- Muthukrishnan, N., M. Murugan, and K. P. Rao. 2008. “Machinability Issues in Turning of Al-SiC (10p) Metal Matrix Composites.” International Journal Advanced Manufacturing Technology 39: 211–218. doi:https://doi.org/10.1007/s00170-007-1220-8.
- Sankar, M., A. Gnanavelbabu, K. Rajkumar, and N. A. Thushal. 2017. “Electrolytic Concentration Effect on the Abrasive Assisted- Electrochemical Machining of Aluminium-Boron Carbide Composite.” Materials and Manufacturing Processes 32: 687–692. doi:https://doi.org/10.1080/10426914.2016.1244840.
- Shen, Y., Y. Liu, and W. Sun. 2016. “High-efficient Dry Hybrid Machining of EDM and Arc Machining.” Procedia CIRP 42: 149–154. doi:https://doi.org/10.1016/j.procir.2016.02.210.
- Shrivastava, P. K., and A. K. Dubey. 2013. “Intelligent Modeling and Multiobjective Optimization of Electric Discharge Diamond Grinding.” Materials and Manufacturing Processes 28: 1036–1041.
- Shrivastava, P. K., and A. K. Dubey. 2014. “EDM Based-Hybrid Machining Processes-A Review.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228 (6): 799–825. doi:https://doi.org/10.1177/0954405413508939.
- Shrivastava, P. K., S. Pandey, and S. Dangi. 2019. “Electrical Arc Machining: Process Capabilities and Current Research Trends.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233 (15): 5190–5200.
- Sivaprakasam, P., P. Hariharan, and S. Gowri. 2013. “Optimization of Micro-WEDM Process of Aluminum Matrix Composite (A413-B4C): A Response Surface Approach.” Materials and Manufacturing Processes 28: 1036–1041. doi:https://doi.org/10.1080/10426914.2013.823502.
- Wang, F., Y. Liu, Y. Shen, R. Ji, Z. Tang, and Y. Zhang. 2013. “Machining Performance of Inconel 718 Using High Current Density Electrical Discharge Milling.” Materials and Manufacturing Processes 28: 1147–1152. doi:https://doi.org/10.1080/10426914.2013.822985.
- Wang, F., Y. Liu, Z. Tang, R. Ji, Y. Zhang, and Y. Shen. 2014. “Ultra-High-Speed Combined Machining of Electrical Discharge Machining and Arc Machining.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228 (5): 663–672. doi:https://doi.org/10.1177/0954405413506194.
- Xu, H., L. Gu, J. Chen, J. Hu, and W. Zhao. 2015. “Machining Characteristics of Nickel-Based Alloy with Positive Polarity Blasting Erosion Arc Machining.” International Journal Advanced Manufacturing Technology 79: 937–947. doi:https://doi.org/10.1007/s00170-015-6891-y.
- Yadav, R. N., and V. Yadava. 2016. “Machining of Hybrid-Metal Matrix Composite Using Erosion-Abrasion Based Compound Wheel in Electrical Discharge Grinding.” Particulate Science and Technology 35 (4): 494–504. doi:https://doi.org/10.1080/02726351.2016.1170743.
- Yadav, R. S., and V. Yadava. 2017. “Performance Study of Electrical Discharge Diamond Face Surface Grinding (EDDFSG) on Hybrid Metal Matrix Composite.” Journal of Mechanical Science and Technology 31 (1): 317–325. doi:https://doi.org/10.1007/s12206-016-1234-y.
- Zhang, M., Q. Zhang, L. Dou, Q. Liu, and C. Dong. 2016. “Effects of Flushing on Electrical Discharge Machining and Electro-Arc Machining.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230 (2): 293–302. doi:https://doi.org/10.1177/0954405415598463.
- Zhang, M., Q. Zhang, H. Wang, G. Liu, and T. Guo. 2015. “Research on a Single Pulse Discharge to Discriminate EDM and EAM Based on the Plasma Tunnel and Crater Geometry.” Journal of Materials Processing Technology 219: 248–256. doi:https://doi.org/10.1016/j.jmatprotec.2014.12.016.
- Zhao, W., L. Gu, H. Xu, L. Li, and X. Xiang. 2013. “A Novel High Efficiency Electrical Erosion Process-Blasting Erosion Arc Machining.” Procedia CIRP 6: 621–625. doi:https://doi.org/10.1016/j.procir.2013.03.057.
- Zhu, G., M. Zhang, Q. Zhang, H. Wang, and K. Wang. 2019. “High-speed Vibration-assisted Electro-arc Machining.” International Journal Advanced Manufacturing Technology 101: 3121–3129. doi:https://doi.org/10.1007/s00170-018-3121-4.
- Zhu, G., Q. Zhang, H. Wang, K. Wang, and M. Zhang. 2016. “Machining Behaviors of Short Electrical Arc Milling with High Frequency and High Voltage Pulses.” International Journal Advanced Manufacturing Technology 90: 1067–1074. doi:https://doi.org/10.1007/s00170-016-9399-1.