References
- Anbarasu, A., and A. Karthikeyan. 2016. “Diesel Engine Performance and Emission Evaluation Using Canola Biodiesel Emulsion Fuel.” Australian Journal of Mechanical Engineering 14 (3): 174–181. doi:https://doi.org/10.1080/14484846.2015.1093222.
- Barresi, A. A., and G. Baldi. 1994. “Deep Catalytic Oxidation of Aromatic Hydrocarbon Mixtures: Reciprocal Inhibition Effects and Kinetics.” Industrial & Engineering Chemistry Research 33 (12): 2964–2974. doi:https://doi.org/10.1021/ie00036a011.
- Bose, D., C. Kurien, A. Sharma, S. Sharma, and A. Sharma. 2018. “Low Cost Cathode Performance of Microbial Fuel Cell for Treating Food Wastewater.” Nature Environment & Pollution Technology 17: 3.
- Caneon, K., and A. K. Srivastav. 2018. “Geometrical Modelling and Analysis of Automotive Oxidation Catalysis System for Compliance with Environmental Emission Norms.” Nature Environment & Pollution Technology 17 (4): 1207–1212. http://www.neptjournal.com/upload-images/NL-66-20-(18)B-3522.pdf.
- Carder, D., R. Ryskamp, M. Besch, and A. Thiruvengadam. 2017. “Emissions Control Challenges for Compression Ignition Engines.” Procedia IUTAM 20 (X): 103–111. doi:https://doi.org/10.1016/j.piutam.2017.03.015.
- Chang, S., J. Zhuo, S. Meng, S. Qin, and Q. Yao. 2016. “Clean Coal Technologies in China: Current Status and Future Perspectives.” Engineering 2 (4): 447–459. doi:https://doi.org/10.1016/J.ENG.2016.04.015.
- Feng, X., Y. Ge, C. Ma, J. Tan, L. Yu, J. Li, and X. Wang. 2014. “Experimental Study on the Nitrogen Dioxide and Particulate Matter Emissions from Diesel Engine Retrofitted with Particulate Oxidation Catalyst.” Science of the Total Environment 472: 56–62. doi:https://doi.org/10.1016/j.scitotenv.2013.11.041.
- Fino, D., S. Bensaid, M. Piumetti, and N. Russo. 2016. “A Review on the Catalytic Combustion of Soot in Diesel Particulate Filters for Automotive Applications: From Powder Catalysts to Structured Reactors.” Applied Catalysis A: General 509: 75–96. doi:https://doi.org/10.1016/j.apcata.2015.10.016.
- Fornarelli, F., S. Camporeale, R. Dadduzio, B. Fortunato, and M. Torresi. 2015. “Numerical Simulation of the Flow Field and Chemical Reactions within a NSC Diesel Catalyst.” Energy Procedia 82 (x): 381–388. doi:https://doi.org/10.1016/j.egypro.2015.11.811.
- Heck, R. M., and R. J. Farrauto. 2001. “Automobile Exhaust Catalysts.” Applied Catalysis A: General 221 (1): 443–457. doi:https://doi.org/10.1016/S0926-860X(01)00818-3.
- Herreros, J. M., S. S. Gill, I. Lefort, A. Tsolakis, P. Millington, and E. Moss. 2014. “Enhancing the Low Temperature Oxidation Performance over a Pt and a Pt-Pd Diesel Oxidation Catalyst.” Applied Catalysis B: Environmental 147: 835–841. doi:https://doi.org/10.1016/j.apcatb.2013.10.013.
- Hubbard, C. P., K. Otto, H. S. Gandhi, and K. Y. S. Ng. 1993. “Propane Oxidation over Platinum Supported on Zirconia.” Journal of Catalysis 139 (1): 268–276. doi:https://doi.org/10.1006/jcat.1993.1022.
- Ionescu, G., D. Zardi, W. Tirler, E. C. Rada, and M. Ragazzi. 2012. “A Critical Analysis of Emissions and Atmospheric Dispersion of Pollutants from Plants for the Treatment of Residual Municipal Solid Waste.” UPB Scientific Bulletin, Series D: Mechanical Engineering 74 (4): 227–240.
- Keren, I., and M. Sheintuch. 2000. “Modeling and Analysis of Spatiotemporal Oscillatory Patterns during CO Oxidation in the Catalytic Converter.” Chemical Engineering Science 55 (8): 1461–1475. doi:https://doi.org/10.1016/S0009-2509(99)00424-8.
- Kurien, C., and A. K. Srivastava. 2018a. “Advancement in the Design of Automotive Catalytic Filter for Meeting Environmental Emission Norms.” Nature Environment and Pollution Technology 17: 2.
- Kurien, C., and A. K. Srivastava. 2018b. “Active Regeneration of Diesel Particulate Filter Using Microwave Energy for Exhaust Emission Control.” In Intelligent Communication, Control and Devices, edited by R. Singh, S. Choudhury, and A. Gehlot, 1233–1241. Singapore: Springer Singapore.
- Kurien, C., and A. K. Srivastava. 2019. “Impact of Electric Vehicles on Indirect Carbon Emissions and Role of Engine Post-Treatment Emission Control Strategies.” Integrated Environmental Assessment and Management. doi:https://doi.org/10.1002/ieam.4206.
- Kurien, C., A. K. Srivastava, N. Gandigudi, and K. Anand. 2019.“Soot Deposition Effects and Microwave Regeneration Modelling of Diesel Particulate Filtration System.” Journal of the Energy Institute, July. doi:https://doi.org/10.1016/J.JOEI.2019.07.005.
- Kurien, C., A. K. Srivastava, and J. Naudin. 2018. “Modelling of Regeneration and Filtration Mechanism in Diesel Particulate Filter for Development of Composite Regeneration Emission Control System.” Archive of Mechanical Engineering 65 (2): 277 290. doi:https://doi.org/10.24425/123025.
- Mohammadhassani, J., A. Dadvand, S. Khalilarya, and M. Solimanpur. 2015. “Prediction and Reduction of Diesel Engine Emissions Using a Combined ANN-ACO Method.” Applied Soft Computing Journal 34: 139–150. doi:https://doi.org/10.1016/j.asoc.2015.04.059.
- Mulla, S. S., N. Chen, L. Cumaranatunge, G. E. Blau, D. Y. Zemlyanov, W. N. Delgass, W. S. Epling, and F. H. Ribeiro. 2006. “Reaction of NO and O2 to NO2 on Pt: Kinetics and Catalyst Deactivation.” Journal of Catalysis 241 (2): 389–399. doi:https://doi.org/10.1016/j.jcat.2006.05.016.
- Neyestanaki, A. K., F. Klingstedt, T. Salmi, and D. Y. Murzin. 2004. “Deactivation of Postcombustion Catalysts, a Review.” Fuel 83 (4): 395–408. doi:https://doi.org/10.1016/j.fuel.2003.09.002.
- Ning, J., and F. Yan. 2016. “Composite Control of DOC-out Temperature for DPF Regeneration.” IFAC-PapersOnLine 49 (11): 20–27. doi:https://doi.org/10.1016/j.ifacol.2016.08.004.
- Peng, P.-Y., M. P. Harold, and D. Luss. 2018. “Sustained Concentration and Temperature Oscillations in a Diesel Oxidation Catalyst.” Chemical Engineering Journal 336: 531–543. doi:https://doi.org/10.1016/j.cej.2017.12.023.
- Pérez, V. R., and B.-L. Agustín. 2015. “Catalytic Regeneration of Diesel Particulate Filters: Comparison of Pt and CePr Active Phases.” Chemical Engineering Journal 279: 79–85. doi:https://doi.org/10.1016/j.cej.2015.05.004.
- Qiu, T., L. Xuchu, H. Liang, X. Liu, and Y. Lei. 2014. “A Method for Estimating the Temperature Downstream of the SCR (Selective Catalytic Reduction) Catalyst in Diesel Engines.” Energy 68: 311–317. doi:https://doi.org/10.1016/j.energy.2014.02.101.
- Schott, F. J. P., S. Steigert, S. Zuercher, M. Endisch, and S. Kureti. 2012. “Reactor Design for the Evaluation of Diesel Oxidation Catalysts Supported by Sintered Metal Filters.” Chemical Engineering and Processing: Process Intensification 62: 54–58. doi:https://doi.org/10.1016/j.cep.2012.09.010.
- Sharma, S. K., P. Goyal, and R. K. Tyagi. 2016. “Conversion Efficiency of Catalytic Converter.” International Journal of Ambient Energy 37 (5): 507–512. doi:https://doi.org/10.1080/01430750.2015.1020567.
- Shukla, P. C., T. Gupta, N. K. Labhasetwar, R. Khobaragade, N. K. Gupta, and A. K. Agarwal. 2017. “Effectiveness of Non-Noble Metal Based Diesel Oxidation Catalysts on Particle Number Emissions from Diesel and Biodiesel Exhaust.” Science of the Total Environment 574: 1512–1520. doi:https://doi.org/10.1016/j.scitotenv.2016.08.155.
- Skoglundh, M., L. O. Löwendahl, and J.-E. Otterated. 1991. “Combinations of Platinum and Palladium on Alumina Supports as Oxidation Catalysts.” Applied Catalysis 77 (1): 9–20. doi:https://doi.org/10.1016/0166-9834(91)80019-S.
- Su, S. C., J. N. Carstens, and A. T. Bell. 1998. “A Study of the Dynamics of Pd Oxidation and PdO Reduction by H2and CH4.” Journal of Catalysis 176 (1): 125–135. doi:https://doi.org/10.1006/jcat.1998.2028.
- Tang, T., J. Zhang, D. Cao, S. Shuai, and Y. Zhao. 2014. “Experimental Study on Filtration and Continuous Regeneration of a Particulate Filter System for Heavy-Duty Diesel Engines.” Journal of Environmental Sciences (China) 26 (12): 2434–2439. doi:https://doi.org/10.1016/j.jes.2014.04.004.
- Twigg, M. V. 2005. “Development of Platinum Catalysts and Their Use in the Control of Vehicle Exhaust Emissions.” Applied Earth Science 114 (3): 158–172. doi:https://doi.org/10.1179/037174505X45540.
- Vijay Kumar, M., A. Veeresh Babu, P. Ravi Kumar, and T. Manoj Kumar Dundi. 2018. “Influence of Different Nozzle Hole Orifice Diameter on Performance, Combustion and Emissions in a Diesel Engine.” Australian Journal of Mechanical Engineering 1–6. doi:https://doi.org/10.1080/14484846.2018.1453975.
- Warkhade, G. S., and A. Veeresh Babu. 2019. “Combustion Characteristics of Linseed (Linum Usitatissimum) Methyl Ester Fuelled Biodiesel Blends in Variable Compression Ratio Diesel Engine.” Australian Journal of Mechanical Engineering 17(1) 1–14.
- Watanabe, T., K. Kawashima, Y. Tagawa, K. Tashiro, H. Anoda, K. Ichioka, S. Sumiya, and G. Zhang. 2007. “New DOC for Light Duty Diesel DPF System.” SAE Technical Paper.
- Wilklow-Marnell, M., and W. D. Jones. 2017. “Catalytic Oxidation of Carbon Monoxide by α-Alumina Supported 3nm Cerium Dioxide Nanoparticles.” Molecular Catalysis 439: 9–14. doi:https://doi.org/10.1016/j.mcat.2017.06.015.
- Yazawa, Y., H. Yoshida, S.-I. Komai, and T. Hattori. 2002. “The Additive Effect on Propane Combustion over Platinum Catalyst: Control of the Oxidation-Resistance of Platinum by the Electronegativity of Additives.” Applied Catalysis A: General 233 (1): 113–124. doi:https://doi.org/10.1016/S0926-860X(02)00129-1.