References
- Abish, J., P. Samal, M. S. Narender, C. Kannan, and A. S. S. Balan. 2018. “Assessment of Drilling-Induced Damage in CFRP under Chilled Air Environment.” Materials and Manufacturing Processes 33 (12): 1361–1368. doi:https://doi.org/10.1080/10426914.2017.1415452.
- Arokiadass, R., K. Palaniraja, and N. Alagumoorthi. 2012. “A Study on Tool Wear and Surface Roughness in End Milling of Aluminum Metal Matrix Composites: Application of Response Surface Methodology.” Journal of Computational & Applied Research in Mechanical Engineering (JCARME) 2 (1): 1–13. doi:https://doi.org/10.5267/j.ijiec.2011.12.002.
- Ashrafi, S. A., P. W. Miller, K. M. Wandro, and D. Kim. 2016. “Characterization and Effects of Fiber Pull-Outs in Hole Quality of Carbon Fiber Reinforced Plastics Composite.” Materials 9 (10): 1–12. doi:https://doi.org/10.3390/ma9100828.
- Athijayamani, A., U. Natarajan, and M. Thiruchitrambalam. 2010. “Prediction and Comparison of Thrust Force and Torque in Drilling of Natural Fibre Hybrid Composite Using Regression and Artificial Neural Network Modelling Prediction and Comparison of Thrust Force and Torque in Drilling of Natural Fibre Hybrid Composite.” International Journal of Machining and Machinability of Materials 8 (1): 131–145. doi:https://doi.org/10.1504/IJMMM.2010.034492.
- Ramnath, B. V., S. Sharavanan, and J. Jeykrishnan. 2017. “Optimization of Process Parameters in the Drilling of Fiber Hybrid Composite Using Taguchi and Grey Relational Analysis.” IOP Conf. Series: Materials Science and Engineering 183: 012003. doi:https://doi.org/10.1088/1757-899X/183/1/012003.
- Desikan, B., and M. P. Jenarthanan. 2016. “Mathematical Modeling of Surface Roughness during Drilling of Resin Hybrid GFRP Composites.” Applied Mechanics and Materials 854: 18–25. https://www.scientific.netdoi:https://doi.org/10.4028/AMM.854.18.
- Dhawan, V., K. Debnath, I. Singh, and S. Singh. 2016. “A Novel Intelligent Software-based Approach to Predict Forces and Delamination during Drilling of Fiber-reinforced Plastics.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230 (2): 603–614. doi:https://doi.org/10.1177/1464420715583164.
- Durão, L. M. P., J. M. R. S. Tavares, V. H. C. De Albuquerque, A. T. Marques, A. G. Magalhães, and A. A. Vieira. 2010. “Tool Effects on Hybrid Laminates Drilling.” Materials and Manufacturing Processes 25 (6): 476–481. doi:https://doi.org/10.1080/10426910903229354.
- Gururaja, S., and M. Ramulu. 2009. “Modified Exit-Ply Delamination Model for Drilling FRPs.” Journal of Composite Materials 43 (5): 483–500. doi:https://doi.org/10.1177/0021998308097677.
- Hocheng, H., and C. C. Tsao. 2003. “Comprehensive Analysis of Delamination in Drilling of Composite Materials with Various Drill Bits.” Journal of Materials Processing Technology 140 (1–3): 335–339. doi:https://doi.org/10.1016/S0924-0136(03)00749-0.
- IşIk, B., and E. Ekici. 2010. “Experimental Investigations of Damage Analysis in Drilling of Woven Glass Fiber-Reinforced Plastic Composites.” International Journal of Advanced Manufacturing Technology 49 (9–12): 861–869. doi:https://doi.org/10.1007/s00170-009-2440-x.
- Xu, J., A. Qinglong, and M. Chen. 2017. “An Experimental Investigation on Cutting-Induced Damage When Drilling High-Strength T800S/250F Carbon Fiber-Reinforced Polymer.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231 (11): 1931–1940. doi:https://doi.org/10.1177/0954405415619348.
- Khashaba, U. A., and A. A. El-Karen. 2017. “Drilling Analysis of Thin Woven Glass-Fiber-Reinforced Epoxy Composites.” Journal of Materials Processing Technology 249: 415–425. doi:https://doi.org/10.1016/j.jmatprotec.2017.06.011.
- Lee, S. C., S. T. Jeong, J. N. Park, S. J. Kim, and G. J. Cho. 2008. “Study on Drilling Characteristics and Mechanical Properties of CFRP Composites.” Acta Mechanica Solida Sinica 21 (4): 364–368. doi:https://doi.org/10.1007/s10338-008-0844-z.
- Mathew, J., N. Ramakrishnan, and N. K. Naik. 1999. “Investigations into the Effect of Geometry of a Trepanning Tool on Thrust and Torque during Drilling of GFRP Composites.” Journal of Materials Processing Technology 91 (1): 1–11. doi:https://doi.org/10.1016/S0924-0136(98)00416-6.
- Mathivanan, N. R., N. S. Manjunatha Babu, and K. V. Kumar. 2018. “Empirical Study on Twisting Force Using Taguchi Doe Technique during Drilling of Hybrid FRP Laminate.” Revue Des Composites Et Des Materiaux Avances 28 (2): 277. doi:https://doi.org/10.3166/RCMA.28.277-288.
- Bhatnagar, N., M. K. Jalutharia, and I. Singh. 2008. “Prediction of Thrust Force and Torque When Drilling Composite Materials.” International Journal of Materials and Product Technology 32 (2/3): 213. doi:https://doi.org/10.1504/IJMPT.2008.018982.
- Phadnis, V. A., A. Roy, and V. V. Silberschmidt. 2012. “Finite Element Analysis of Drilling in Carbon Fiber Reinforced Polymer Composites.” Journal of Physics: Conference Series 382 (1). doi:https://doi.org/10.1088/1742-6596/382/1/012014.
- Phapale, K., A. Ahire, and R. Singh. 2018. “Experimental Characterization and Finite Element Modeling of Critical Thrust Force in CFRP Drilling.” Machining Science and Technology 22 (2): 249–270. doi:https://doi.org/10.1080/10910344.2017.1337134.
- Prakash, M., and P. V. S. Dileep Aditya Dhar. 2017. “Investigation on the Effect of Drilling Parameters on the Tool Wear and Delamination of Glass Fibre-Reinforced Polymer Composite Using Vibration Signal Analysis.” Journal of Composite Materials 002199831772810. doi:https://doi.org/10.1177/0021998317728109.
- Rajesh Mathivanan, N., B. S. Mahesh, and H. A. Shetty. 2016. “An Experimental Investigation on the Process Parameters Influencing Machining Forces during Milling of Carbon and Glass Fiber Laminates.” Measurement 91: 39–45. doi:https://doi.org/10.1016/j.measurement.2016.04.077.
- Ramesh, M., and A. Gopinath. 2017. “Measurement and Analysis of Thrust Force in Drilling Sisal-Glass Fiber Reinforced Polymer Composites.” IOP Conference Series: Materials Science and Engineering 197: 012056. doi:https://doi.org/10.1088/1757-899X/197/1/012056.
- Shunmugesh, K., and K. Panneerselvam. 2017. “Investigation and Optimization of Machining Parameters in Drilling of Carbon Fiber Reinforced Polymer (CFRP) Composites.” Pigment & Resin Technology 46 (1): 21–30. doi:https://doi.org/10.1108/PRT-03-2016-0029.
- Singh, A. P., M. Sharma, and I. Singh. 2014. “Optimal Control during Drilling in GFRP Composite Laminates.” Multidiscipline Modeling in Materials and Structures 10 (4): 611–630. doi:https://doi.org/10.1108/MMMS-04-2014-0019.
- Singh, I. 2009. “Investigation of Drilling in [(0/90)/ 0] S Glass Fibre Reinforced Plastics Using Taguchi Method.” Advances in Production Engineering and Management 4: 37–46.
- Sureshkumar, M. S., D. Lakshmanan, and A. Murugarajan. 2014. “Experimental Investigation and Mathematical Modelling of Drilling on GFRP Composites.” Materials Research Innovations 18 (sup1): S1 94–S1 97. doi:https://doi.org/10.1179/1432891713Z.000000000361.
- Tan, C. L., A. I. Azmi, and N. Muhammad. 2017. “Critical Thrust Force for On-Set Delamination of Hybrid FRP Composite during Drilling Process.” Key Engineering Materials 740: 111–117. https://www.scientific.netdoi:https://doi.org/10.4028/KEM.740.111.
- Tsao, C. C., and H. Hocheng. 2005. “Computerized Tomography and C-Scan for Measuring Delamination in the Drilling of Composite Materials Using Various Drills.” International Journal of Machine Tools and Manufacture 45 (11): 1282–1287. doi:https://doi.org/10.1016/j.ijmachtools.2005.01.009.
- Won, M. S., and C. K. H. Dharan. 2002. “Drilling of Aramid and Carbon Fiber Polymer Composites.” Journal of Manufacturing Science and Engineering 124 (4): 778. doi:https://doi.org/10.1115/1.1505854.