References
- Behera, B. C., H. Alemayehu, S. Ghosh, and P. V. Rao. 2017. “A Comparative Study of Recent Lubri-coolant Strategies for Turning of Ni-based Superalloy.” Journal of Manufacturing Processes 30: 541–552. doi:https://doi.org/10.1016/j.jmapro.2017.10.027.
- Boubekri, N., V. Shaikh, and P. R. Foster. 2010. “A Technology Enabler for Green Machining: Minimum Quantity Lubrication (MQL).” Journal of Manufacturing Technology Management 21 (5): 556–566. doi:https://doi.org/10.1108/17410381011046968.
- Davoodi, B., and A. Hosseini Tazehkandi. 2016. “Cutting Forces and Surface Roughness in Wet Machining of Inconel Alloy 738 with Coated Carbide Tool.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230 (2): 215–226. doi:https://doi.org/10.1177/0954405414542990.
- Debnath, S., M. M. Reddy, and Q. S. Yi. 2014. “Environmental Friendly Cutting Fluids and Cooling Techniques in Machining: A Review.” Journal of Cleaner Production 83: 33–47. doi:https://doi.org/10.1016/j.jclepro.2014.07.071.
- Dennison, M. S., N. M. Sivaram, D. Barik, and S. Ponnusamy. 2019. “Turning Operation of AISI 4340 Steel in Flooded, Near-dry and Dry Conditions: A Comparative Study on Tool-work Interface Temperature.” Mechanics and Mechanical Engineering 23 (1): 172–182. doi:https://doi.org/10.2478/mme-2019-0023.
- Dureja, J. S., R. Singh, and M. S. Bhatti. 2014. “Optimizing Flank Wear and Surface Roughness during Hard Turning of AISI D3 Steel by Taguchi and RSM Methods.” Production & Manufacturing Research 2 (1): 767–783. doi:https://doi.org/10.1080/21693277.2014.955216.
- Gopal, P. M., and K. S. Prakash. 2018. “Minimization of Cutting Force, Temperature and Surface Roughness through GRA, TOPSIS and Taguchi Techniques in End Milling of Mg Hybrid MMC.” Measurement 116: 178–192. doi:https://doi.org/10.1016/j.measurement.2017.11.011.
- Hassanpour, H., M. H. Sadeghi, A. Rasti, and S. Shajari. 2016. “Investigation of Surface Roughness, Microhardness and White Layer Thickness in Hard Milling of AISI 4340 Using Minimum Quantity Lubrication.” Journal of Cleaner Production 120: 124–134. doi:https://doi.org/10.1016/j.jclepro.2015.12.091.
- Imani Asrai, R., S. T. Newman, and A. Nassehi. 2018. “A Mechanistic Model of Energy Consumption in Milling.” International Journal of Production Research 56 (1–2): 642–659. doi:https://doi.org/10.1080/00207543.2017.1404160.
- Jing, X., H. Li, J. Wang, Y. Yuan, D. Zhang, N. Kwok, and T. Nguyen. 2017. “An Investigation of Surface Roughness in Micro-End-Milling of Metals.” Australian Journal of Mechanical Engineering 15 (3): 166–174. doi:https://doi.org/10.1080/14484846.2016.1211472.
- Kurgin, S., J. M. Dasch, D. L. Simon, G. C. Barber, and Q. Zou. 2012. “Evaluation of the Convective Heat Transfer Coefficient for Minimum Quantity Lubrication (MQL).” Industrial Lubrication and Tribology 64 (6): 376–386. doi:https://doi.org/10.1108/00368791211262516.
- Kurnosov, N. E., K. V. Lebedinskiy, A. V. Tarnopolskiy, A. S. Asoskov, and Y. P. Perelygin. 2018. “Turning of Structural Steel while Supplying Cooled Ionized Air to the Cutting Zone.” Australian Journal of Mechanical Engineering 16 (1): 58–64. doi:https://doi.org/10.1080/14484846.2017.1296809.
- Leppert, T. 2011. “Effect of Cooling and Lubrication Conditions on Surface Topography and Turning Process of C45 Steel.” International Journal of Machine Tools and Manufacture 51 (2): 120–126. doi:https://doi.org/10.1016/j.ijmachtools.2010.11.001.
- Mia, M., P. R. Dey, M. S. Hossain, M. T. Arafat, M. Asaduzzaman, M. S. Ullah, and S. T. Zobaer. 2018. “Taguchi S/N Based Optimization of Machining Parameters for Surface Roughness, Tool Wear and Material Removal Rate in Hard Turning under MQL Cutting Condition.” Measurement 122: 380–391. doi:https://doi.org/10.1016/j.measurement.2018.02.016.
- Patel, S., D. Thesiya, and A. Rajurkar. 2018. “Aluminium Powder Mixed Rotary Electric Discharge Machining (PMEDM) on Inconel 718.” Australian Journal of Mechanical Engineering 16 (1): 21–30. doi:https://doi.org/10.1080/14484846.2017.1294230.
- Polishetty, A., M. Shunmugavel, M. Goldberg, G. Littlefair, and R. K. Singh. 2017. “Cutting Force and Surface Finish Analysis of Machining Additive Manufactured Titanium Alloy Ti-6Al-4V.” Procedia Manufacturing 7: 284–289. doi:https://doi.org/10.1016/j.promfg.2016.12.071.
- Rahim, E. A., and H. Sasahara. 2011. “A Study of the Effect of Palm Oil as MQL Lubricant on High Speed Drilling of Titanium Alloys.” Tribology International 44 (3): 309–317. doi:https://doi.org/10.1016/j.triboint.2010.10.032.
- Sarhan, A. A., M. Sayuti, and M. Hamdi. 2012. “Reduction of Power and Lubricant Oil Consumption in Milling Process Using a New SiO2 Nanolubrication System.” The International Journal of Advanced Manufacturing Technology 63 (5–8): 505–512. doi:https://doi.org/10.1007/s00170-012-3940-7.
- Schwarz, M., M. Dado, R. Hnilica, and D. Veverková. 2015. “Environmental and Health Aspects of Metalworking Fluid Use.” Polish Journal of Environmental Studies 24 (1): 37-45.
- Selvam, M. D., and P. Senthil. 2016. “Investigation on the Effect of Turning Operation on Surface Roughness of Hardened C45 Carbon Steel.” Australian Journal of Mechanical Engineering 14 (2): 131–137. doi:https://doi.org/10.1080/14484846.2015.1093257.
- Selvam, M. D., P. Senthil, and N. M. Sivaram. 2017. “Parametric Optimisation for Surface Roughness of AISI 4340 Steel during Turning under near Dry Machining Condition.” International Journal of Machining and Machinability of Materials 19 (6): 554–569. doi:https://doi.org/10.1504/IJMMM.2017.088896.
- Sharma, A. K., A. K. Tiwari, and A. R. Dixit. 2016. “Effects of Minimum Quantity Lubrication (MQL) in Machining Processes Using Conventional and Nanofluid Based Cutting Fluids: A Comprehensive Review.” Journal of Cleaner Production 127: 1–18. doi:https://doi.org/10.1016/j.jclepro.2016.03.146.
- Singaravel, B., and T. Selvaraj. 2016. “Experimental Investigation on Cutting Forces, Specific Cutting Pressure, Co-efficient of Friction and Shear Energy in Turning of HSLA Steel.” Management and Production Engineering Review 7 (1): 71–76. doi:https://doi.org/10.1515/mper-2016-0008.
- Vardhaman, B. A., M. Amarnath, D. Jhodkar, J. Ramkumar, H. Chelladurai, and M. K. Roy. 2018. “Influence of Coconut Oil on Tribological Behavior of Carbide Cutting Tool Insert during Turning Operation.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 (9): 450. doi:https://doi.org/10.1007/s40430-018-1379-y.