References
- Azpen, Q., S. Sulaiman, H. T. Baharuddin, and F. Mustapha. 2018. “Reinforcement and Hot Workability of Aluminum Alloy 7075 Particulate Composites: A Review.” Journal of Engineering Science and Technology 13 (4): 1034–1057.
- Balasubramanian, I., and R. Maheswaran. 2015. “Effect of Inclusion of SiC Particulates on the Mechanical Resistance Behaviour of Stir-cast AA6063/SiC Composites.” Materials and Design 65: 511–520. doi:https://doi.org/10.1016/j.matdes.2014.09.067.
- Cavaliere, P. 2004. “Isothermal Forging of AA2618 Reinforced with 20% of Alumina Particles.” Composites Part A: Applied Science and Manufacturing 35: 619–629. doi:https://doi.org/10.1016/j.compositesa.2004.02.014.
- Cavaliere, P., E. Cerri, and E. Evangelista. 2004. “Isothermal Forging Modelling of 2618+ 20% Al2O3p Metal Matrix Composite.” Journal of Alloys and Compounds 378: 117–122. doi:https://doi.org/10.1016/j.jallcom.2003.10.103.
- El-Raghy, T., P. Blau, and M. W. Barsoum. 2000. “Effect of Grain Size on Friction and Wear Behavior of Ti3SiC2.” Wear 238: 125–130. doi:https://doi.org/10.1016/S0043-1648(99)00348-8.
- Hassani, A., E. Bagherpour, and F. Qods. 2014. “Influence of Pores on Workability of Porous Al/SiC Composites Fabricated through Powder Metallurgy and Mechanical Alloying.” Journal of Alloys and Compounds 591: 132–142. doi:https://doi.org/10.1016/j.jallcom.2013.12.205.
- Ho, Y.-C., F.-K. Chen, and S. Torng. 2010. “A Study on Forging of Aluminum-based Metal Matrix Composites.” International Journal of Materials Forum 3: 351–354. doi:https://doi.org/10.1007/s12289-010-0779-z.
- Jaykumar, L., and K. Balamurugan. 2014. “Reciprocating Wear Behavior of 7075 Al/Al2O3 Composites.” International Journal of Refractory Metals and Hard Materials 46: 137–144.
- Lim, C. Y. H., S. C. Lim, and M. Gupta. 2003. “Wear Behavior of SiC Reinforced Magnesium Matrix Composites.” Wear 255: 629–637. doi:https://doi.org/10.1016/S0043-1648(03)00121-2.
- Liu, J., Z. Zheng, J. Wang, Y. Wu, W. Tang, and J. Lü. 2008. “Pressureless Infiltration of Liquid Aluminum Alloy into SiC Preforms to Form Near-net-shape SiC/Al Composites.” Journal of Alloys and Compounds 465: 239–243. doi:https://doi.org/10.1016/j.jallcom.2007.10.055.
- Ozben Tamer, E., and O. C. Kilickap. 2008. “Investigation of Mechanical and Machinability Properties of SiC Particle Reinforced Al-MMC.” Journal of Materials Processing Technology 198: 220–225. doi:https://doi.org/10.1016/j.jmatprotec.2007.06.082.
- Ozdemir, I., U. Cocen, and K. Onel. 2000. “The Effect of Forging on the Properties of Particulate-SiC-reinforced Aluminum-Alloy Composites.” Composites Science and Technology 60: 411–419. doi:https://doi.org/10.1016/S0266-3538(99)00140-2.
- Rao, R. N., and S. Das. 2010. “Effect of Matrix Alloy and Influence of SiC Particles on the Sliding Wear Behavior of Aluminium Alloy Composites.” Materials and Design 31: 1200–1207. doi:https://doi.org/10.1016/j.matdes.2009.09.032.
- Ravichandran, M., A. N. Sait, and V. Anandakrishnan. 2014. “Workability Studies on Al+2.5% TiO2+Gr Powder Metallurgy Composites during Cold Upsetting.” Materials Research 17 (6): 1489–1496. doi:https://doi.org/10.1590/1516-1439.258713.
- Sang-Yong, L., L. Jung-Hwan, and L. Young-Seon. 2001. “Characterization of Al 7075 Alloys after Cold Working and Heating in the Semi-solid Temperature Range.” Journal of Materials Processing Technology 111: 42–47. doi:https://doi.org/10.1016/S0924-0136(01)00494-0.
- Shorowordi, K. M., T. Laoui, A. S. Haseeb, M. A. Celis, and J. P. Froyen. 2003. “Microstructure and Interface Characteristics of B4C, SiC and Al2O3 Reinforced Al Matrix Composites: A Comparative Study.” Journal of Materials Processing Technology 142: 738–743. doi:https://doi.org/10.1016/S0924-0136(03)00815-X.
- Su, Y., Q. Ouyang, W. Zhang, Z. Li, Q. Guo, G. Fan, and D. Zhang. 2014. “Composite Structure Modeling and Mechanical Behavior of Particle Reinforced Metal Matrix Composites.” Materials Science and Engineering, A 597: 359–369. doi:https://doi.org/10.1016/j.msea.2014.01.024.
- Wu, K., K. Deng, K. Nie, Y. Wu, X. Wang, X. Hu, and M. Zheng. 2010. “Microstructure and Mechanical Properties of SiCp/AZ91 Composite Deformed through a Combination of Forging and Extrusion Process.” Materials and Design 31 (8): 3929–3932. doi:https://doi.org/10.1016/j.matdes.2010.03.021.