References
- Arora, A., M. Mehta, and A. De. 2012. “Load Bearing Capacity of Tool Pin during Friction Stir Welding.” International Journal of Advanced Manufacturing Technology 61: 911–920. doi: https://doi.org/10.1007/s00170-011-3759-7.
- ASTM E8/E8M-09. 2010. “Standard Test Methods for Tension Testing of Metallic Materials.”ASTM International 1:1–30.
- Bahemmat, P. 2012. “Study on Dissimilar Friction Stir Butt Welding of AA7075-O and AA2024-T4 considering the Manufacturing Limitation.” International Journal of Advanced Manufacturing Technology 59 (9): 939–953. doi: https://doi.org/10.1007/s00170-011-3547-4.
- Cam, G., and S. Mistikoglu. 2014. “Recent Developments in Friction Stir Welding of Al-alloys.” Journal of Materials Engineering and Performance 23: 1936–1953. doi: https://doi.org/10.1007/s11665-014-0968-x.
- Carlone, P., A. Astarita, and G. S. Palazzo. 2015. “Microstructura Aspects in Al–Cu Dissimilar Joining by FSW.” International Journal of Advanced Manufacturing Technology 79: 1109–1116. doi: https://doi.org/10.1007/s00170-015-6874-z.
- Davis, J. R. 2001. Alloying: Understanding of Basics: Aluminum and Aluminum Alloys, 1–167. ASM International.
- Dilip, J. J. S., M. Koilraj, and V. Sundereswaran. 2010. “Microstructural Characterization of Dissimilar Friction Stir Welds between AA2219 and AA5083.” Transactions of Indian Institute of Metals 63: 757–764. doi: https://doi.org/10.1007/s12666-010-0116-8.
- Elangovan, K., V. Balasubramanian, and M. Valliappan. 2008. “Effect of Tool Pin Profile and Tool Rotational Speed on Mechanical Properties of Friction Stir Welded AA6061 Aluminium Alloy.” Materials and Manufacturing Process 23 (3): 251–260. doi: https://doi.org/10.1080/10426910701860723.
- El-Hafez, H. A., and A. El-Megharbel. 2018. “Friction Stir Welding of Dissimilar Aluminum Alloys.” World Journal of Engineering and Technology 6: 408–419. doi: https://doi.org/10.4236/wjet.2018.62025.
- Guo, J. F., H. C. Chen, and C. N. Sun. 2014. “Friction Stir Welding of Dissimilar Materials between AA6061 and AA7075 Aluminium Alloys Effects of Process Parameters.” Materials and Design 56: 185–192. doi:https://doi.org/10.1016/j.matdes.2013.10.082.
- Ilangovan, M., R. S. Boopathy, and V. Balasubramanian. 2015. “Effect of Tool Pin Profile on Microstructure and Tensile Properties of Friction Stir Welded Dissimilar AA 6061-AA 5086 Aluminium Alloy Joints.” Defence Technology 11: 174–184. doi:https://doi.org/10.1016/j.dt.2015.01.004.
- Kasman, S., and Z. Yenier.2014. “Analyzing Dissimilar Friction Stir Welding of AA5754/AA7075.” International Journal of Advanced Manufacturing Technology 70 (1): 145–156. doi:https://doi.org/10.1007/s00170-013-5256-7.
- Mastanaiah, P., A. Sharma, and M. G. Reddy. 2016. “Dissimilar Friction Stir Welds in AA2219-AA5083 Aluminium Alloys: Effect of Process Parameters on Material Inter-mixing, Defect Formation, and Mechanical Properties.” Transactions of Indian Institute of Metals 69: 1397–1415. doi:https://doi.org/10.1007/s12666-015-0694-6.
- Mehta, M., A. De, and T. DebRoy. 2014. “Material Adhesion and Stresses on Friction Stir Welding Tool Pins.” Science and Technology of Welding and Joining 19: 534–540. doi:https://doi.org/10.1179/1362171814Y.0000000221.
- Mehta, M. M., G. A. V. Reddy, A. Rao, and A. De. 2015. “Numerical Modeling of Friction Stir Welding Using the Tools with Polygonal Pins.” Defence Technology xx: 1–8.
- Meshram., S. D., M. G. Reddy, and V. A. Rao. 2016. “Role of Threaded Tool Pin Profile and Rotational Speed on Generation of Defect Free Friction Stir AA 2014 Aluminium Alloy Welds.” Defence Science Journal 66 (1): 57–63. doi:https://doi.org/10.14429/dsj.66.8566.
- Miller, W. S., L. Zhuang, J. Bottema, A. J. Wittebrood, P. De Smet, A. Haszler, and A. Vieregge. 2000. “Recent Development in Aluminium Alloys for the Automotive Industry.” Materials Science and Engineering A 280: 37–49 doi:https://doi.org/10.1016/S0921-5093(99)00653-X.
- Mishra, R. S., and Z. Y. Ma. 2005. “Friction Stir Welding and Processing.” Materials Science Engineering R 50: 1–78. doi:https://doi.org/10.1016/j.mser.2005.07.001.
- Nandan, R., T. DebRoy, and H. K. D. H. Bhadeshia. 2008. “Recent Advances in Friction Stir Welding-process Weldment Structure and Properties.” Progressive Material Science 53: 980–1023. doi:https://doi.org/10.1016/j.pmatsci.2008.05.001.
- Olson, D. L., T. A. Siewert, and S. Liu. 1993. ASM Handbook Volume 6: Welding, Brazing, and Soldering, 1–1299. ASM International. ISBN: 978-0-87170-382.
- Park, S. K., S. T. Hong, and J. H. Park. 2010. “Effect of Material Location on Properties of Friction Stir Welding Joints of Dissimilar Aluminium Alloys.”Science and Technology of Welding and Joining 15: 331–336. doi:https://doi.org/10.1179/136217110X12714217309696.
- Ramanjaneyulu, K., M. G. Reddy, and V. A. Rao. 2014. “Role of Tool Shoulder Diameter in Friction Stir Welding: An Analysis of the Temperature and Plastic Deformation of AA 2014 Aluminium Alloy.” Transactions of Indian Institute of Metals 67: 769–780. doi:https://doi.org/10.1007/s12666-014-0401-z.
- Rao, S. T., M. G. Reddy, and K. S. R. Rao. 2015. “Microstructure and Mechanical Properties of Friction Stir Welded AA7075−T651 Aluminium Alloy Thick Plates.” Transactions of Nonferrous Metals Society of China 25: 1770–1778. doi:https://doi.org/10.1016/S1003-6326(15)63782-7.
- Reddy, M. G., P. Mastanaiah, and S. K. Prasad. 2009. “Microstructure and mechanical property correlations in AA 6061 aluminium alloy friction stir welds” Transactions of Indian Institute of Metals.” 62 (1): 49–58. Doi :https://doi.org/10.1007/s12666-009-0007-z.
- Rodriguez, R. I., J. B. Jordon, and P. G. Allison. 2015. “Microstructure and Mechanical Properties of Dissimilar Friction Stir Welding of AA6061-to-AA7050 Aluminum Alloys.” Materials and Design 83: 60–65. doi:https://doi.org/10.1016/j.matdes.2015.05.074.
- Saravanan, V., N. Banerjee, and R. Amuthakkannan. 2016. “Effect of Shoulder Diameter to Pin Diameter Ratio on Microstructure and Mechanical Properties of Dissimilar Friction Stir Welded AA2024-T6 and AA7075-T6 Aluminum Alloy Joints.” International Journal of Advanced Manufacturing Technology 87: 3637–3645. doi:https://doi.org/10.1007/s00170-016-8695-0.
- Shah, P. H., and V. J. Badheka. 2016. “An Experimental Insight on the Selection of the Tool Tilt Angle for Friction Stir Welding of 7075-T651 Aluminium Alloys.” Indian Journal of Science and Technology 9: 1–11. doi:https://doi.org/10.17485/ijst/2016/v9iS1/102976.
- Thamos, W. M., and E. D. Nicholas. 1997. “Friction Stir Welding for the Transportation Industries.” Materials and Design 18. 269–273. doi:https://doi.org/10.1016/S0261-3069(97)00062-9.
- Thamos, W. M., and E. D. Nicholas. 1998. “A Review of Friction Processes for Aerospace Applications.” International Journal of Materials Production Technology 13: 45–54.
- Thamos, W. M., K. I. Johnson, and C. S. Wiesner. 2003. “Friction Stir Welding–recent Developments in Tools and Process Technologies.” Advanced Material Engineering 5: 485–490. doi:https://doi.org/10.1002/adem.200300355.
- Shah, L. H., N. H. Othman, and A. Gerlich. 2018. “Review of research progress on aluminium–magnesium dissimilar friction stir welding.“ Science and Technology of Welding and Joining 23(3): 256-270. doi:https://doi.org/10.1080/13621718.2017.1370193.
- Thomas, W. M., E. D. Nicholas, and J. C. Needham 1991. Int. Patent Appl. No. PCT/GB92/02203 and GB Patent Appl. No. 9125978.8, U.S. Patent Appl, No. 5460317.
- Threadgill, P. L. 2007. “Terminology in Friction Stir Welding.” Science and Technology of Welding and Joining 12 (4): 357–360. doi:https://doi.org/10.1179/174329307X197629.
- Threadgill, P. L., A. J. Leonard, and H. R. Shercliff. 2009. “Friction Stir Welding of Aluminium Alloys.” International Materials Reviews 54 (2): 49–93. doi:https://doi.org/10.1179/174328009X411136.
- Venkateswara Rao, R., and M. Senthil Kumar. 2018. “Experimental Investigation on Effect of Welding Parameters on the Friction Stir Welding of 6061-T6.” Materials Today Proceedings 5: 12265–12272. doi:https://doi.org/10.1016/j.matpr.2018.02.205.
- Zhang, Y. N., X. Cao, and S. Larose. 2012. “Review of Tools for Friction Stir Welding and Processing.” Canadian Metallurgical Quarterly 51 (3): 250–261.