References
- Andrusca, L., I. Doroftei, P. D. Barsanescu, V. Goanta, A. Savin. 2015. “Design of a Testing Device for Cruciform Specimens Subjected to Planar Biaxial Tension.” In Innovative Manufacturing Engineering 2015, 700–705. Trans Tech Publications.
- Baptista, R., R. A. Claudio, L. Reis. 2015. “Optimization of Cruciform Specimens for Biaxial Fatigue Loading with Direct Multi Search.” Theoretical and Applied Fracture Mechanic 80:65–72. doi:https://doi.org/10.1016/j.tafmec.2015.06.009.
- Breitbarth, E., and M. Besel. 2018. “Fatigue Crack Deflection in Cruciform Specimens Subjected to Biaxial Loading Conditions.” International Journal of Fatigue 113: 345–350. doi:https://doi.org/10.1016/j.ijfatigue.2018.04.021.
- Coppieters, S., T. Hakoyama, D. Yanaga. 2016 “Identification on Stress Measurement Errors in Biaxial Tensile Testing and the Impact on Yield Surface Identification.”Melbourne, Australia: AIP Conference Proceedings NUMISHEET 2014 628–631. https://doi.org/10.1063/1.4850051.
- Deng, N., T. Kuwabara, and Y. P. Korkolis. 2015. “Cruciform Specimen Design and Verification for Constitutive Identification of Cruciform Specimen Design and Verification for Constitutive Identification of Anisotropic Sheets.” Experimental Mechanics 55 (6): 1005–1022. doi:https://doi.org/10.1007/s11340-015-9999-y.
- Farhadzadeh, F., M. Salmani, and T. Mehdi. 2018. “Determining Biaxial Tensile Stresses by Fracture Cruciform Specimen at Different Temperatures and Strain Rates for Ti – 6Al – 4V Alloy.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 40: 532.
- Gadakh, V. S., and V. B. Shinde. 2011. “Selection of Cutting Parameters in Side Milling Operation Using Graph Theory and Matrix Approach.” International Journal of Advanced Manufacturing Technology 56 (9–12): 857–863. doi:https://doi.org/10.1007/s00170-011-3256-z.
- Hanabusa, Y., H. Takizawa, and T. Kuwabara. 2013. “Numerical Verification of a Biaxial Tensile Test Method Using a Cruciform Specimen.” Journal of Materials Processing Technology 213 (6): 961–970. doi:https://doi.org/10.1016/j.jmatprotec.2012.12.007.
- Hannon, A., and P. Tiernan. 2007. “A Review of Planar Biaxial Tensile Test Systems for Sheet Metal.” Journal of Materials Processing Technology 198 (1–3): 1–13. doi:https://doi.org/10.1016/j.jmatprotec.2007.10.015.
- Hu, J. 2014. “Influence of Specimen Geometry on the Estimation of the Planar Biaxial Mechanical Properties of Cruciform Specimens.” Experimental Mechanics 54: 615–631. doi:https://doi.org/10.1007/s11340-013-9826-2.
- Hwang, C., and K. Yoon. 1981. “Multiple Attribute Decision Making: Methods and Applications.” Lecture Notes in Economics and Mathematical Systems 181. doi:https://doi.org/10.1007/978-3-642-48318-9
- Liviu, A., G. Viorel, and B. P. Doru. 2014. “Optimizing the Shape and Size of Cruciform Specimens Used for Biaxial Optimizing the Shape and Size of Cruciform Specimens Used for Biaxial Tensile Test.” Applied Mechanics and Materials 658: 167–172.http://www.scientific.net/ doi:https://doi.org/10.4028/AMM.658.167.
- Meng, Y., Y. Xia, Q. Zhou, and S. Lin. 2018. “Identification of True Stress-Strain Curve of Thermoplastic Polymers under Biaxial Tension.” J Mater Manf 9: 768–775. doi:https://doi.org/10.4271/2016-01-0514.
- Mulay, A., B. S. Ben, S. Ismail, A. Kocanda, C. Jasiński. 2018. “Performance Evaluation of High-speed Incremental Sheet Forming Technology for AA5754 H22 Aluminum and DC04 Steel Sheets.” Archives of Civil and Mechanical Engineering 18 (4): 1275–1287. doi:https://doi.org/10.1016/j.acme.2018.03.004.
- Nagano, C., T. Kuwabara, Y. Shimada, and R. Kawamura 2018. “Measurement of Differential Hardening under Biaxial Stress of Pure Titanium Sheet Measurement of Differential Hardening under Biaxial Stress of Pure Titanium Sheet.” https://doi.org/https://doi.org/10.1088/1757-899X/418/1/012090
- Song, X., L. Leotoing, D. Guines, and E. Ragneau. 2016. “Investigation of the Forming Limit Strains at Fracture of AA5086 Sheets Using an In-plane Biaxial Tensile Test.” Engineering Fracture Mechanics 163: 130–140. doi:https://doi.org/10.1016/j.engfracmech.2016.07.007.
- Tiernan, P., and A. Hannon. 2014. “Design Optimisation of Biaxial Tensile Test Specimen Using Finite Element Analysis.” Int J Mater Form 7 (1): 117–123. doi:https://doi.org/10.1007/s12289-012-1105-8.
- Tomoyuki Hakoyama, T. K. 2012. “Biaxial Tensile Test of High Strength Steel Sheet for Large Plastic Strain Range.” Key Engineering Materials Trans Tech Publications, Switzerland 506: 59–64. http://www.scientific.net/ doi:https://doi.org/10.4028/KEM.504-506.59.
- Upadhyay, M. V., A. Patra, W. Wen, T. Panzner, S. Van Petegem, C. N. Tomé, R. A. Lebensohn. 2018. “Mechanical Response of Stainless Steel Subjected to Biaxial Load Path Changes: Cruciform Experiments and Multi-scale Modeling.” International Journal of Plasticity 108 :144–168. doi:https://doi.org/10.1016/j.ijplas.2018.05.003.
- Wu, C., H. Chang, and L. Wu. 2017. “Evaluating Optimal Choice of the Energy Fund by Using AHP-TOPSIS Model.” Journal of Information and Optimization Sciences 30: 1081–1098. doi:https://doi.org/10.1080/02522667.2009.10699929.
- Xiao, R., X. Li, L. Lang, Q. Song, K.-N. Liu. 2017. “Forming Limit in Thermal Cruciform Biaxial Tensile Testing of Titanium Alloy.” Journal of Materials Processing Tech 240 :354–361. doi:https://doi.org/10.1016/j.jmatprotec.2016.10.016.
- Xiao, R., X. Li, L. Lang, Y.-K. Chen, Y.-F. Yang. 2016. “Biaxial Tensile Testing of Cruciform Slim Superalloy at Elevated Temperatures.” Materials and Design 94 :286–294. doi:https://doi.org/10.1016/j.matdes.2016.01.045.
- Yu, Y., M. Wan, X. D. Wu, and Z. X. Bin. 2002. “Design of a Cruciform Biaxial Tensile Specimen for Limit Strain Analysis by FEM.” Journal of Materials Processing Technology 123: 67–70. doi:https://doi.org/10.1016/S0924-0136(02)00062-6.
- Zhao, K., L. Chen, R. Xiao, Z. Ding, L. Zhou. 2019. “Design of a Biaxial Tensile Testing Device and Cruciform Specimens for Large Plastic Deformation in the Central Zone.” Journal of Material Science 54 (9): 7231–7245. doi:https://doi.org/10.1007/s10853-019-03358-2.