A review on parameters affecting properties of biomaterial SS 316L

References

• Abedalwafa, M., F. Wang, L. Wang, and C. Li. 2013. “Biodegradable Poly-epsilon-caprolactone (PCL) for Tissue Engineering Applications: A Review.” Reviews on Advanced Materials Science 34 (2): 123–140.
   Web of Science ®Google Scholar
• Alves, G. 2017. “The Importance of Metallic Materials as Biomaterials.” Advances in Tissue Engineering and Regenerative Medicine 3 (1): 3–5.
   Google Scholar
• Amalraju, D. 2012. “Mechanical Strength Evaluation Analysis of Stainless Steel and Titanium Locking Plate for Femur Bone Fracture.” Engineering Science and Technology, an International Journal 2 (3): 381–388.
   Google Scholar
• Arden, G. P., A. R. Taylor, and B. M. Ansell. 1970. “Total Hip Replacement Using the McKee-Farrar Prosthesis.” Annals of the Rheumatic Diseases 29 (1): 1–5. doi:https://doi.org/10.1136/ard.29.1.1.
   PubMedGoogle Scholar
• AzoM. 2003. “Alumina as an Orthopaedic Biomaterial.”viewed 16 April 2020,
   Google Scholar
• Bartolomeu, F., M. Buciumeanu, E. Pinto, and N. Alves. 2017. “316L Stainless Steel Mechanical and Tribological Behavior− a Comparison between Selective Laser Melting, Hot Pressing and Conventional Casting.” Additive Manufacturing 16: 81–89. doi:https://doi.org/10.1016/j.addma.2017.05.007.
   Google Scholar
• Bates, M. N. 2011. “Dental Amalgam Fillings: A Source of Mercury Exposure.” Encyclopedia of Environmental Health 11–20.
   Google Scholar
• Buddy, J. L., D. Ratner, A. S. Hoffman, and F. J. Schoen. 2004. Biomaterials Science. 2nd ed. California, London, Elsevier.
   Google Scholar
• Casaletto, M. P., G. M. Ingo, S. Kaciulis, G. Mattogno, L. Pandolfi, and G. Scavia. 2001. “Surface Studies of in Vitro Biocompatibility of Titanium Oxide Coatings.” Applied Surface Science 172 (1–2): 167–177. doi:https://doi.org/10.1016/S0169-4332(00)00844-8.
   Google Scholar
• Chelvanathan, P., S. A. Shahahmadi, F. Arith, K. Sobayel, M. Aktharuzzaman, K. Sopian, F. H. Alharbi, et al. 2017. “Effects of RF Magnetron Sputtering Deposition Process Parameters on the Properties of Molybdenum Thin Films”. Thin Solid Films 638: 213–219. doi:https://doi.org/10.1016/j.tsf.2017.07.057.
   Google Scholar
• Chevalier, J. 2006. “What Future for Zirconia as a Biomaterial?” Biomaterials 27 (4): 535–543. doi:https://doi.org/10.1016/j.biomaterials.2005.07.034.
   PubMed Web of Science ®Google Scholar
• Chih-Chun Hsieh, W. W. 2014. “Overview of Intemetallic Sigma Phase Precipitation in Stainless Steels.” Metallo della saldatura e saldabilità 2012: 361–382.
   Google Scholar
• El-Hadad, S., W. Khalifa, and A. Nofal. 2015. “Surface Modification of Investment cast-316L Implants: Microstructure Effects.” Materials Science and Engineering: C 48: 320–327. doi:https://doi.org/10.1016/j.msec.2014.12.038.
   PubMed Web of Science ®Google Scholar
• Elias, C. N., J. H. C. Lima, R. Valiev, and M. A. Meyers. 2008. “Biomedical Applications of Titanium and Its Alloys.” Jom 60 (3): 46–49. doi:https://doi.org/10.1007/s11837-008-0031-1.
   Web of Science ®Google Scholar
• Farooq, I., Z. Imran, U. Farooq, A. Leghari, and H. Ali. 2012. “Bioactive Glass: A Material for the Future.” World Journal of Dentistry 3 (June): 199–201. doi:https://doi.org/10.5005/jp-journals-10015-1156.
   Google Scholar
• Gaviria, L., J. P. Salcido, T. Guda, and J. L. Ong. 2014. “Current Trends in Dental Implants.” Journal of the Korean Association of Oral and Maxillofacial Surgeons 40 (2): 50. doi:https://doi.org/10.5125/jkaoms.2014.40.2.50.
   PubMedGoogle Scholar
• Gerhardt, L.-C., and A. R. Boccaccini. 2010. “Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering.” Materials (Basel) 3 (7): 3867–3910. doi:https://doi.org/10.3390/ma3073867.
   PubMed Web of Science ®Google Scholar
• Gubicza, J., M. El-Tahawy, Y. Huang, H. Choi, H. Choe, J. L. Lábár, T. G. Langdon, et al. 2016. “Microstructure, Phase Composition and Hardness Evolution in 316L Stainless Steel Processed by High-pressure Torsion”. Materials Science and Engineering: A 657: 215–223. doi:https://doi.org/10.1016/j.msea.2016.01.057.
   Google Scholar
• Habibovic, P., and F. Barrere. 2002. “Biomimetic Hydroxyapatite Coating on Metal Implants.” Journal of the American Ceramic Society 85 (3): 517–522. doi:https://doi.org/10.1111/j.1151-2916.2002.tb00126.x.
   Google Scholar
• Harun, W. S. W., R. I. M. Asri, J. Alias, F. H. Zulkifli, K. Kadirgama, S. A. C. Ghani, J. H. M. Shariffuddin, et al. 2018. “A Comprehensive Review of Hydroxyapatite-based Coatings Adhesion on Metallic Biomaterials.” Ceramics International 44 (2): 1250–1268. doi:https://doi.org/10.1016/j.ceramint.2017.10.162.
   Web of Science ®Google Scholar
• Ibrahim, M. Z., A. A. D. Sarhan, F. Yusuf, and M. Hamdi. 2017. “Biomedical Materials and Techniques to Improve the Tribological, Mechanical and Biomedical Properties of Orthopedic Implants – A Review Article.” Journal of Alloys and Compounds 714: 636–667. doi:https://doi.org/10.1016/j.jallcom.2017.04.231.
   Web of Science ®Google Scholar
• Jenkins, M. 2007. Biomedical Polymers, Cambridge, England, Woodhead Publishing Limited and CRC Press LLC.
   Google Scholar
• John, A. A., S. K. Jaganathan, E. Supriyanto, and A. Manikandan. 2016. “Surface Modification of Titanium and Its Alloys for the Enhancement of Osseointegration in Orthopaedics.” Current Science 111 (6): 1003–10s15. doi:https://doi.org/10.18520/cs/v111/i6/1003-1015.
   Google Scholar
• Joseph, D. R. P., and D. Bronzino. 2015. Biomedical Engineering Fundamentals. 4th ed., London, New York, CRC Press.
   Google Scholar
• Joyace Wong, J. B. 2007. BioMaterials, London, New York, CRC Press.
   Google Scholar
• Jurczyk, M. 2012. Bionanomaterials for Dental Applications.,London, NewYork, Pan Stanford Publishing.
   Google Scholar
• Kaiser, R., K. Williamson, C. O’Brien, S. Ramirez-Garcia, and D. J. Browne. 2013. “The Influence of Cooling Conditions on Grain Size, Secondary Phase Precipitates and Mechanical Properties of Biomedical Alloy Specimens Produced by Investment Casting.” Journal of the Mechanical Behavior of Biomedical Materials 24: 53–63. doi:https://doi.org/10.1016/j.jmbbm.2013.04.013.
   PubMed Web of Science ®Google Scholar
• Kumar, P., I. S. Ahuja, and R. Singh. 2016. “Experimental Investigations on Hardness of the Biomedical Implants Prepared by Hybrid Investment Casting.” Journal of Manufacturing Processes 21: 160–171. doi:https://doi.org/10.1016/j.jmapro.2016.01.001.
   Web of Science ®Google Scholar
• La, P., F. Wei, X. Lu, C. Chu, Y. Wei, and H. Wang. 2014. “Effect of Annealing Temperature on Microstructure and Mechanical Properties of Bulk 316L Stainless Steel with Nano- and Micro-crystalline Dual Phases.” Metallurgical and Materials Transactions A 45 (11): 5236–5244. doi:https://doi.org/10.1007/s11661-014-2432-9.
   Google Scholar
• Li, N., and Y. Zheng. 2013. “Novel Magnesium Alloys Developed for Biomedical Application: A Review.” Journal of Materials Science & Technology 29 (6): 489–502. doi:https://doi.org/10.1016/j.jmst.2013.02.005.
   Web of Science ®Google Scholar
• Li, Y., C. Yang, H. Zhao, S. Qu, X. Li, and Y. Li. 2014. “New Developments of Ti-based Alloys for Biomedical Applications.” Materials (Basel) 7 (3): 1709–1800.
   PubMed Web of Science ®Google Scholar
• Long, M., and H. J. Rack. 1998. “Titanium Alloys in Total Joint Replacement–a Materials Science Perspective.” Biomaterials 19 (18): 1621–1639. doi:https://doi.org/10.1016/S0142-9612(97)00146-4.
   PubMed Web of Science ®Google Scholar
• Luo, Y., L. Yang, and M. Tian. 2013. Application of Biomedical- Grade Titanium Alloys in Trabecular Bone and Artifi Cial Joints. Vol. 2013, 181–216. Sawston, Cambridge, Woodhead Publishing Limited.
   Google Scholar
• Lyon, D., J. Chevalier, L. Gremillard, and C. A. D. Cam. 2011. “Zirconia as a Biomaterial.” Comprehensive Biomaterials 20: 95–108.
   Google Scholar
• Mahyudin, F., L. Widhiyanto, and H. Hermawan. 2016. “Biomaterials in Orthopaedics.” Advanced Structured Materials 58 (July): 161–181.
   Google Scholar
• Malikmammadov, E., T. E. Tanir, A. Kiziltay, V. Hasirci, and N. Hasirci. 2017. PCL and PCL-based Materials in Biomedical Applications. Vol. 5063. no. October. United Kingdom, Taylor & Francis.
   Google Scholar
• Mataya, M. C., E. R. Nilsson, E. L. Brown, and G. Krauss. 2003. “Hot Working and Recrystallization of As-Cast 316L.” Metallurgical and Materials Transactions A 34 (August): 1683–1703. doi:https://doi.org/10.1007/s11661-003-0313-8.
   Google Scholar
• Mediaswanti, K., C. Wen, E. P. Ivanova, C. C. Berndt, and J. Wang. 2013. “Sputtered Hydroxyapatite Nanocoatings on Novel Titanium Alloys for Biomedical Applications.” Intech 2: 21–44.
   Google Scholar
• Montero Sistiaga, M. L., S. Nardone, C. Hautfenne, and J. Van Humbeeck. 2016. “Effect of Heat Treatment of 316L Stainless Steel Produced by Selective Laser Melting (SLM).” 27th Annual International Solid Freeform Fabrication Symposium- an Additive Manufacturing Conference Solid Freeform Fabrication Symposium 558–565.
   Google Scholar
• Mucalo, M. 2015. Hydroxyapatite for Biomedical Applications, Sawston, Cambridge, Woodhead Publishing Limited.
   Google Scholar
• Niinomi, M. 2002. “Recent Metallic Materials for Biomedical Applications.” Metallurgical and Materials Transactions A 33 (3): 477–486. doi:https://doi.org/10.1007/s11661-002-0109-2.
   Web of Science ®Google Scholar
• Ohkubo, N., K. Miyakusu, Y. Uematsu, and H. Kimura. 1994. “Effect of Alloying Elements on the Mechanical Properties of the Stable Austenitic Stainless Steel.” ISIJ International 34 (9): 764–772. doi:https://doi.org/10.2355/isijinternational.34.764.
   Google Scholar
• Patel, N., and P. Gohil. 2012. “A Review on Biomaterials: Scope, Applications & Human Anatomy Significance.” International Journal of Emerging Technology and Advanced Engineering 2 (4): 91–101.
   Google Scholar
• Peter, I., and M. Rosso. 2015. “Study of Ti-enriched CoCrMo Alloy for Dental Application.” IEEE Access 3: 73–80. doi:https://doi.org/10.1109/ACCESS.2015.2398312.
   Google Scholar
• Petrini, L., and F. Migliavacca. 2011. “Biomedical Applications of Shape Memory Alloys.” Journal of Metallurgy 2011 (Figure 1): 1–15. doi:https://doi.org/10.1155/2011/501483.
   Google Scholar
• Poinern, G. E. J., S. Brundavanam, and D. Fawcett. 2013. “Biomedical Magnesium Alloys: A Review of Material Properties, Surface Modifications and Potential as A Biodegradable Orthopaedic Implant.” American Journal of Biomedical Engineering 2 (6): 218–240. doi:https://doi.org/10.5923/j.ajbe.20120206.02.
   Google Scholar
• Prakasam, M., J. Locs, K. Salma-Ancane, D. Loca, A. Largeteau, and L. Berzina-Cimdina. 2015. “Fabrication, Properties and Applications of Dense Hydroxyapatite: A Review.” Journal of Functional Biomaterials 6 (4): 1099–1140. doi:https://doi.org/10.3390/jfb6041099.
   PubMed Web of Science ®Google Scholar
• Rack, H. J., and J. I. Qazi. 2006. “Titanium Alloys for Biomedical Applications.” Materials Science and Engineering: C 26 (8): 1269–1277. doi:https://doi.org/10.1016/j.msec.2005.08.032.
   Web of Science ®Google Scholar
• Savioli Lopes, M., A. L. Jardini, and R. Maciel Filho. 2012. “Poly (Lactic Acid) Production for Tissue Engineering Applications.” Procedia Engineering 42: 1402–1413. doi:https://doi.org/10.1016/j.proeng.2012.07.534.
   Google Scholar
• Shastri, V. 2003. “Non-Degradable Biocompatible Polymers in Medicine: Past, Present and Future.” Current Pharmaceutical Biotechnology 4 (5): 331–337. doi:https://doi.org/10.2174/1389201033489694.
   PubMedGoogle Scholar
• Shelton, R. 2017. Biocompatibility of Dental Biomaterials., Sawston, Cambridge, Woodhead Publishing Limited.
   Google Scholar
• Singh, J., R. Singh, and H. Singh. 2017. “Dimensional Accuracy and Surface Finish of Biomedical Implant Fabricated as Rapid Investment Casting for Small to Medium Quantity Production.” Journal of Manufacturing Processes 25: 201–211. doi:https://doi.org/10.1016/j.jmapro.2016.11.012.
   Google Scholar
• Tan, L., J. Dong, J. Chen, and K. Yang. 2017. “Development of Magnesium Alloys for Biomedical Applications: Structure, Process to Property Relationship.” Materials Technology 7857 (December): 1–9.
   Google Scholar
• Toh, W. Q., X. Tan, A. Bhowmik, E. Liu, and S. B. Tor. 2017. “Tribochemical Characterization and Tribocorrosive Behavior of CoCrMo Alloys: A Review.” Material 2018 11 (30): 1-21.
   Google Scholar
• Ulery, B. D., L. S. Nair, and C. T. Laurencin. 2011. “Biomedical Applications of Biodegradable Polymers.” National Institutes of Health 49 (12): 832–864.
   Google Scholar
• Vitek, J. M., and S. A. David. 1986. “The Sigma Phase Transformation in Austenitic Stainless Steels.” Welding Journal Research Supplemnnt (Presented 65th Annual AWS Convention 1984) (April): 106-s-111-s.
   Google Scholar
• Wanhill, R., and S. Barter. 2012. “Fatigue of Beta Processed and Beta Heat-treated Titanium Alloys.” Springerbriefs in Applied Science & Technology:1–7.
   Google Scholar
• Xiao, L., B. Wang, G. Yang, and M. Gauthier. 2012. “Poly(Lactic Acid)-Based Biomaterials: Synthesis, Modification and Applications.” Biomedical Science, Engineering and Technology., ISBN: 978-953-307-471-9, InTech:247-282
   Google Scholar
• Yoneyama, T., and S. Miyazaki. 2009. Shape Memory Alloys for Biomedical Applications., Sawston, Cambridge, Woodhead Publishing Limited
   Google Scholar
• Zhang, Z., S. Zhang, and L. Shang. 2013. Hydroxyapatite Coating for Biomedical Applications., London, New York, CRC Press.
   Google Scholar